Rick Altherr <kc8apf@kc8apf.net> - update syntax

[openocd.git] / src / target / target / at91eb40a.cfg

diff --git a/src/target/target/at91eb40a.cfg b/src/target/target/at91eb40a.cfg
index 7a3a620a7401842677f5344a7d8ffac7f1a6317b..b2b91dbcaebf432b81e247e2339a0135ed7d2394 100644 (file)
--- a/src/target/target/at91eb40a.cfg
+++ b/src/target/target/at91eb40a.cfg
@@ -14,21 +14,27 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little reset_init 0 arm7tdmi-s_r4
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
 
 # speed up memory downloads
-arm7 fast_memory_access enable
+arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
-# OpenOCD does not have a flash driver for for AT91FR40162S 
-target_script 0 reset event/at91eb40a_reset.cfg
+#flash driver
+flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
-working_area 0 0x00000000 0x20000 nobackup
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
 
-#force hardware values - we're running out of flash more
-#often than not. The user can disable this in his
-#subsequent config script.
-arm7_9 force_hw_bkpts enable
+[new_target_name] configure -event reset-init {
+       puts "Running reset init script for AT91EB40A"
+       # Reset script for AT91EB40a
+       reg cpsr 0x000000D3
+       mww 0xFFE00020 0x1
+       mww 0xFFE00024 0x00000000  
+       mww 0xFFE00000 0x01002539 
+       mww 0xFFFFF124 0xFFFFFFFF  
+       mww 0xffff0010 0x100
+       mww 0xffff0034 0x100
+}