Rick Altherr <kc8apf@kc8apf.net> - update syntax

[openocd.git] / src / target / target / at91eb40a.cfg

diff --git a/src/target/target/at91eb40a.cfg b/src/target/target/at91eb40a.cfg
index 42ce2f3fca8bd23930080152ce3e4a07d1fbb2a1..b2b91dbcaebf432b81e247e2339a0135ed7d2394 100644 (file)
--- a/src/target/target/at91eb40a.cfg
+++ b/src/target/target/at91eb40a.cfg
@@ -14,7 +14,7 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-target arm7tdmi little 0 arm7tdmi-s_r4
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
 
 # speed up memory downloads
 arm7_9 fast_memory_access enable
@@ -25,16 +25,10 @@ flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
-working_area 0 0x00000000 0x20000 nobackup
-
-
-
-global reset_count
-set reset_count 0
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
 
 [new_target_name] configure -event reset-init {
        puts "Running reset init script for AT91EB40A"
-       global reset_count
        # Reset script for AT91EB40a
        reg cpsr 0x000000D3
        mww 0xFFE00020 0x1
@@ -43,13 +37,4 @@ set reset_count 0
        mww 0xFFFFF124 0xFFFFFFFF  
        mww 0xffff0010 0x100
        mww 0xffff0034 0x100
-       set reset_count [expr $reset_count+1]
-       echo "Testing reset $reset_count !"
-       
-}
-
-[new_target_name] configure -event reset-start {
-       global reset_count
-       set reset_count [expr $reset_count+1]
-       echo "Testing pre_reset $reset_count !"
 }