if (!etb)
{
- ERROR("etb selected as etm capture driver, but no ETB configured");
+ LOG_ERROR("etb selected as etm capture driver, but no ETB configured");
return ERROR_OK;
}
if (etm_ctx->capture_driver->init(etm_ctx) != ERROR_OK)
{
- ERROR("ETM capture driver initialization failed");
+ LOG_ERROR("ETM capture driver initialization failed");
exit(-1);
}
{
if (etm_read_reg(reg) != ERROR_OK)
{
- ERROR("BUG: error scheduling etm register read");
+ LOG_ERROR("BUG: error scheduling etm register read");
exit(-1);
}
if (jtag_execute_queue() != ERROR_OK)
{
- ERROR("register read failed");
+ LOG_ERROR("register read failed");
}
return ERROR_OK;
u8 reg_addr = etm_reg->addr & 0x7f;
scan_field_t fields[3];
- DEBUG("%i", etm_reg->addr);
+ LOG_DEBUG("%i", etm_reg->addr);
jtag_add_end_state(TAP_RTI);
arm_jtag_scann(etm_reg->jtag_info, 0x6);
{
if (etm_write_reg(reg, value) != ERROR_OK)
{
- ERROR("BUG: error scheduling etm register write");
+ LOG_ERROR("BUG: error scheduling etm register write");
exit(-1);
}
if (jtag_execute_queue() != ERROR_OK)
{
- ERROR("register write failed");
+ LOG_ERROR("register write failed");
exit(-1);
}
return ERROR_OK;
u8 reg_addr = etm_reg->addr & 0x7f;
scan_field_t fields[3];
- DEBUG("%i: 0x%8.8x", etm_reg->addr, value);
+ LOG_DEBUG("%i: 0x%8.8x", etm_reg->addr, value);
jtag_add_end_state(TAP_RTI);
arm_jtag_scann(etm_reg->jtag_info, 0x6);
ctx->current_pc - ctx->image->sections[section].base_address,
4, buf, &size_read)) != ERROR_OK)
{
- ERROR("error while reading instruction: %i", retval);
+ LOG_ERROR("error while reading instruction: %i", retval);
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
opcode = target_buffer_get_u32(ctx->target, buf);
ctx->current_pc - ctx->image->sections[section].base_address,
2, buf, &size_read)) != ERROR_OK)
{
- ERROR("error while reading instruction: %i", retval);
+ LOG_ERROR("error while reading instruction: %i", retval);
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
opcode = target_buffer_get_u16(ctx->target, buf);
}
else if (ctx->core_state == ARMV4_5_STATE_JAZELLE)
{
- ERROR("BUG: tracing of jazelle code not supported");
+ LOG_ERROR("BUG: tracing of jazelle code not supported");
exit(-1);
}
else
{
- ERROR("BUG: unknown core state encountered");
+ LOG_ERROR("BUG: unknown core state encountered");
exit(-1);
}
if (size == 8)
{
- ERROR("TODO: add support for 64-bit values");
+ LOG_ERROR("TODO: add support for 64-bit values");
return -1;
}
else if (size == 4)
/* a positive return values means the current branch was abandoned,
* and a new branch was encountered in cycle ctx->pipe_index + retval;
*/
- WARNING("abandoned branch encountered, correctnes of analysis uncertain");
+ LOG_WARNING("abandoned branch encountered, correctnes of analysis uncertain");
ctx->pipe_index += retval;
continue;
}
}
break;
default: /* reserved */
- ERROR("BUG: branch reason code 0x%x is reserved", ctx->last_branch_reason);
+ LOG_ERROR("BUG: branch reason code 0x%x is reserved", ctx->last_branch_reason);
exit(-1);
break;
}
if (argc != 5)
{
- ERROR("incomplete 'etm config <target> <port_width> <port_mode> <clocking> <capture_driver>' command");
+ LOG_ERROR("incomplete 'etm config <target> <port_width> <port_mode> <clocking> <capture_driver>' command");
exit(-1);
}
if (!target)
{
- ERROR("target number '%s' not defined", args[0]);
+ LOG_ERROR("target number '%s' not defined", args[0]);
exit(-1);
}
{
/* no supported capture driver found, don't register an ETM */
free(etm_ctx);
- ERROR("trace capture driver '%s' not found", args[4]);
+ LOG_ERROR("trace capture driver '%s' not found", args[4]);
return ERROR_OK;
}
max_port_size = 16;
break;
default:
- ERROR("Illegal max_port_size");
+ LOG_ERROR("Illegal max_port_size");
exit(-1);
}
command_print(cmd_ctx, "max. port size: %i", max_port_size);