The bitbang driver leaves the TCK 0 when in idle
[openocd.git] / src / target / cortex_m3.c
index 964c6b8c397687645f734f97bdab062bb0d0a5fd..ca629cc6ff9cdbb49048ab3f9084716e9f1d32cb 100644 (file)
@@ -144,6 +144,7 @@ int cortex_m3_exec_opcode(target_t *target,u32 opcode, int len /* MODE, r0_inval
        return retvalue;
 }
 
+#if 0
 /* Enable interrupts */
 int cortex_m3_cpsie(target_t *target, u32 IF)
 {
@@ -155,6 +156,7 @@ int cortex_m3_cpsid(target_t *target, u32 IF)
 {
        return cortex_m3_exec_opcode(target, ARMV7M_T_CPSID(IF), 2);
 }
+#endif
 
 int cortex_m3_endreset_event(target_t *target)
 {
@@ -325,7 +327,6 @@ int cortex_m3_debug_entry(target_t *target)
                cortex_m3_store_core_reg_u32(target, ARMV7M_REGISTER_CORE_GP, 16, xPSR &~ 0xff);
        }
 
-
        /* Now we can load SP core registers */ 
        for (i = ARMV7M_PRIMASK; i < ARMV7NUMCOREREGS; i++)
        {
@@ -432,7 +433,7 @@ int cortex_m3_halt(target_t *target)
        if (target->state == TARGET_HALTED)
        {
                WARNING("target was already halted");
-               return ERROR_TARGET_ALREADY_HALTED;
+               return ERROR_OK;
        }
        
        if (target->state == TARGET_UNKNOWN)
@@ -1212,39 +1213,31 @@ int cortex_m3_read_memory(struct target_s *target, u32 address, u32 size, u32 co
        armv7m_common_t *armv7m = target->arch_info;
        cortex_m3_common_t *cortex_m3 = armv7m->arch_info;
        swjdp_common_t *swjdp = &cortex_m3->swjdp_info;
+       int retval;
        
        /* sanitize arguments */
        if (((size != 4) && (size != 2) && (size != 1)) || (count == 0) || !(buffer))
                return ERROR_INVALID_ARGUMENTS;
-
-       if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
-               return ERROR_TARGET_UNALIGNED_ACCESS;
        
-       /* Is not optimal, autoincrement of tar should be used (  ahbap_block_read and CSW_ADDRINC_SINGLE ) */
+       /* cortex_m3 handles unaligned memory access */
+               
        switch (size)
        {
                case 4:
-                       /* TODOLATER Check error return value ! */
-                       {
-                               ahbap_read_buf(swjdp, buffer, 4 * count, address);
-                       }
+                       retval = ahbap_read_buf_u32(swjdp, buffer, 4 * count, address);
                        break;
                case 2:
-                       {
-                               ahbap_read_buf_u16(swjdp, buffer, 2 * count, address);
-                       }       
+                       retval = ahbap_read_buf_u16(swjdp, buffer, 2 * count, address);
                        break;
                case 1:
-                       {
-                               ahbap_read_buf(swjdp, buffer, count, address);
-                       }       
+                       retval = ahbap_read_buf_u8(swjdp, buffer, count, address);
                        break;
                default:
                        ERROR("BUG: we shouldn't get here");
                        exit(-1);
        }
        
-       return ERROR_OK;
+       return retval;
 }
 
 int cortex_m3_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
@@ -1253,45 +1246,34 @@ int cortex_m3_write_memory(struct target_s *target, u32 address, u32 size, u32 c
        armv7m_common_t *armv7m = target->arch_info;
        cortex_m3_common_t *cortex_m3 = armv7m->arch_info;
        swjdp_common_t *swjdp = &cortex_m3->swjdp_info;
+       int retval;
        
        /* sanitize arguments */
        if (((size != 4) && (size != 2) && (size != 1)) || (count == 0) || !(buffer))
                return ERROR_INVALID_ARGUMENTS;
-
-       if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
-               return ERROR_TARGET_UNALIGNED_ACCESS;
-               
+       
        switch (size)
        {
                case 4:
-                       /* TODOLATER Check error return value ! */
-                       {
-                               ahbap_write_buf(swjdp, buffer, 4 * count, address);
-                       }
+                       retval = ahbap_write_buf_u32(swjdp, buffer, 4 * count, address);
                        break;
                case 2:
-                       {
-                               ahbap_write_buf_u16(swjdp, buffer, 2 * count, address);
-                       }       
+                       retval = ahbap_write_buf_u16(swjdp, buffer, 2 * count, address);
                        break;
                case 1:
-                       {
-                               ahbap_write_buf(swjdp, buffer, count, address);
-                       }       
+                       retval = ahbap_write_buf_u8(swjdp, buffer, count, address);     
                        break;
                default:
                        ERROR("BUG: we shouldn't get here");
                        exit(-1);
        }
        
-       return ERROR_OK;
+       return retval;
 }
 
 int cortex_m3_bulk_write_memory(target_t *target, u32 address, u32 count, u8 *buffer)
 {
-       cortex_m3_write_memory(target, address, 4, count, buffer);
-       
-       return ERROR_OK;
+       return cortex_m3_write_memory(target, address, 4, count, buffer);
 }
 
 void cortex_m3_build_reg_cache(target_t *target)

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)