armv7a_mmu: Remove armv7a_mmu_translate_va()
[openocd.git] / src / target / armv7a_mmu.c
index 859332a44e732d1f433e3437f6d1fc8eb30dce3c..6118417fce7d50331092dd0ad976e7eb603b4558 100644 (file)
 
 #define SCTLR_BIT_AFE (1 << 29)
 
-/*  method adapted to Cortex-A : reused ARM v4 v5 method */
-int armv7a_mmu_translate_va(struct target *target,  uint32_t va, uint32_t *val)
-{
-       uint32_t first_lvl_descriptor = 0x0;
-       uint32_t second_lvl_descriptor = 0x0;
-       int retval;
-       struct armv7a_common *armv7a = target_to_armv7a(target);
-       uint32_t ttbidx = 0;    /*  default to ttbr0 */
-       uint32_t ttb_mask;
-       uint32_t va_mask;
-       uint32_t ttb;
-
-       if (target->state != TARGET_HALTED)
-               LOG_INFO("target not halted, using cached values for translation table!");
-
-       /* if va is above the range handled by ttbr0, select ttbr1 */
-       if (va > armv7a->armv7a_mmu.ttbr_range[0]) {
-               /*  select ttb 1 */
-               ttbidx = 1;
-       }
-
-       ttb = armv7a->armv7a_mmu.ttbr[ttbidx];
-       ttb_mask = armv7a->armv7a_mmu.ttbr_mask[ttbidx];
-       va_mask = 0xfff00000 & armv7a->armv7a_mmu.ttbr_range[ttbidx];
-
-       LOG_DEBUG("ttb_mask %" PRIx32 " va_mask %" PRIx32 " ttbidx %i",
-                 ttb_mask, va_mask, ttbidx);
-       retval = armv7a->armv7a_mmu.read_physical_memory(target,
-                       (ttb & ttb_mask) | ((va & va_mask) >> 18),
-                       4, 1, (uint8_t *)&first_lvl_descriptor);
-       if (retval != ERROR_OK)
-               return retval;
-       first_lvl_descriptor = target_buffer_get_u32(target, (uint8_t *)
-                       &first_lvl_descriptor);
-       /*  reuse armv4_5 piece of code, specific armv7a changes may come later */
-       LOG_DEBUG("1st lvl desc: %8.8" PRIx32 "", first_lvl_descriptor);
-
-       if ((first_lvl_descriptor & 0x3) == 0) {
-               /* Avoid LOG_ERROR, probably GDB is guessing the stack frame */
-               LOG_WARNING("Address translation failure [1]: va %8.8" PRIx32 "", va);
-               return ERROR_TARGET_TRANSLATION_FAULT;
-       }
-
-       if ((first_lvl_descriptor & 0x40002) == 2) {
-               /* section descriptor */
-               *val = (first_lvl_descriptor & 0xfff00000) | (va & 0x000fffff);
-               return ERROR_OK;
-       } else if ((first_lvl_descriptor & 0x40002) == 0x40002) {
-               /* supersection descriptor */
-               if (first_lvl_descriptor & 0x00f001e0) {
-                       LOG_ERROR("Physical address does not fit into 32 bits");
-                       return ERROR_TARGET_TRANSLATION_FAULT;
-               }
-               *val = (first_lvl_descriptor & 0xff000000) | (va & 0x00ffffff);
-               return ERROR_OK;
-       }
-
-       /* page table */
-       retval = armv7a->armv7a_mmu.read_physical_memory(target,
-                       (first_lvl_descriptor & 0xfffffc00) | ((va & 0x000ff000) >> 10),
-                       4, 1, (uint8_t *)&second_lvl_descriptor);
-       if (retval != ERROR_OK)
-               return retval;
-
-       second_lvl_descriptor = target_buffer_get_u32(target, (uint8_t *)
-                       &second_lvl_descriptor);
-
-       LOG_DEBUG("2nd lvl desc: %8.8" PRIx32 "", second_lvl_descriptor);
-
-       if ((second_lvl_descriptor & 0x3) == 0) {
-               /* Avoid LOG_ERROR, probably GDB is guessing the stack frame */
-               LOG_WARNING("Address translation failure [2]: va %8.8" PRIx32 "", va);
-               return ERROR_TARGET_TRANSLATION_FAULT;
-       }
-
-       if ((second_lvl_descriptor & 0x3) == 1) {
-               /* large page descriptor */
-               *val = (second_lvl_descriptor & 0xffff0000) | (va & 0x0000ffff);
-       } else {
-               /* small page descriptor */
-               *val = (second_lvl_descriptor & 0xfffff000) | (va & 0x00000fff);
-       }
-
-       return ERROR_OK;
-}
-
 /*  V7 method VA TO PA  */
 int armv7a_mmu_translate_va_pa(struct target *target, uint32_t va,
        uint32_t *val, int meminfo)

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)