Remove FSF address from GPL notices
[openocd.git] / src / target / armv7a_cache.c
index da617b81b1019d5b7b0a9c00cd4d19d42a5d8f6e..7af3e6d4e8a2d6ff1cf8ba9917613fcea9fe1f0b 100644 (file)
@@ -11,6 +11,9 @@
  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -35,7 +38,7 @@ static int armv7a_l1_d_cache_sanity_check(struct target *target)
 
        /*  check that cache data is on at target halt */
        if (!armv7a->armv7a_mmu.armv7a_cache.d_u_cache_enabled) {
-               LOG_DEBUG("l1 data cache is not enabled");
+               LOG_DEBUG("data cache is not enabled");
                return ERROR_TARGET_INVALID;
        }
 
@@ -53,7 +56,7 @@ static int armv7a_l1_i_cache_sanity_check(struct target *target)
 
        /*  check that cache data is on at target halt */
        if (!armv7a->armv7a_mmu.armv7a_cache.i_cache_enabled) {
-               LOG_DEBUG("l1 data cache is not enabled");
+               LOG_DEBUG("instruction cache is not enabled");
                return ERROR_TARGET_INVALID;
        }
 
@@ -152,13 +155,14 @@ int armv7a_cache_auto_flush_all_data(struct target *target)
 }
 
 
-static int armv7a_l1_d_cache_inval_virt(struct target *target, uint32_t virt,
+int armv7a_l1_d_cache_inval_virt(struct target *target, uint32_t virt,
                                        uint32_t size)
 {
        struct armv7a_common *armv7a = target_to_armv7a(target);
        struct arm_dpm *dpm = armv7a->arm.dpm;
        struct armv7a_cache_common *armv7a_cache = &armv7a->armv7a_mmu.armv7a_cache;
-       uint32_t i, linelen = armv7a_cache->dminline;
+       uint32_t linelen = armv7a_cache->dminline;
+       uint32_t va_line, va_end;
        int retval;
 
        retval = armv7a_l1_d_cache_sanity_check(target);
@@ -169,15 +173,39 @@ static int armv7a_l1_d_cache_inval_virt(struct target *target, uint32_t virt,
        if (retval != ERROR_OK)
                goto done;
 
-       for (i = 0; i < size; i += linelen) {
-               uint32_t offs = virt + i;
+       va_line = virt & (-linelen);
+       va_end = virt + size;
+
+       /* handle unaligned start */
+       if (virt != va_line) {
+               /* DCCIMVAC */
+               retval = dpm->instr_write_data_r0(dpm,
+                               ARMV4_5_MCR(15, 0, 0, 7, 14, 1), va_line);
+               if (retval != ERROR_OK)
+                       goto done;
+               va_line += linelen;
+       }
 
-               /* DCIMVAC - Clean and invalidate data cache line by VA to PoC. */
+       /* handle unaligned end */
+       if ((va_end & (linelen-1)) != 0) {
+               va_end &= (-linelen);
+               /* DCCIMVAC */
                retval = dpm->instr_write_data_r0(dpm,
-                               ARMV4_5_MCR(15, 0, 0, 7, 6, 1), offs);
+                               ARMV4_5_MCR(15, 0, 0, 7, 14, 1), va_end);
                if (retval != ERROR_OK)
                        goto done;
        }
+
+       while (va_line < va_end) {
+               /* DCIMVAC - Invalidate data cache line by VA to PoC. */
+               retval = dpm->instr_write_data_r0(dpm,
+                               ARMV4_5_MCR(15, 0, 0, 7, 6, 1), va_line);
+               if (retval != ERROR_OK)
+                       goto done;
+               va_line += linelen;
+       }
+
+       dpm->finish(dpm);
        return retval;
 
 done:
@@ -193,7 +221,8 @@ int armv7a_l1_d_cache_clean_virt(struct target *target, uint32_t virt,
        struct armv7a_common *armv7a = target_to_armv7a(target);
        struct arm_dpm *dpm = armv7a->arm.dpm;
        struct armv7a_cache_common *armv7a_cache = &armv7a->armv7a_mmu.armv7a_cache;
-       uint32_t i, linelen = armv7a_cache->dminline;
+       uint32_t linelen = armv7a_cache->dminline;
+       uint32_t va_line, va_end;
        int retval;
 
        retval = armv7a_l1_d_cache_sanity_check(target);
@@ -204,15 +233,19 @@ int armv7a_l1_d_cache_clean_virt(struct target *target, uint32_t virt,
        if (retval != ERROR_OK)
                goto done;
 
-       for (i = 0; i < size; i += linelen) {
-               uint32_t offs = virt + i;
+       va_line = virt & (-linelen);
+       va_end = virt + size;
 
+       while (va_line < va_end) {
                /* DCCMVAC - Data Cache Clean by MVA to PoC */
                retval = dpm->instr_write_data_r0(dpm,
-                               ARMV4_5_MCR(15, 0, 0, 7, 10, 1), offs);
+                               ARMV4_5_MCR(15, 0, 0, 7, 10, 1), va_line);
                if (retval != ERROR_OK)
                        goto done;
+               va_line += linelen;
        }
+
+       dpm->finish(dpm);
        return retval;
 
 done:
@@ -228,7 +261,8 @@ int armv7a_l1_d_cache_flush_virt(struct target *target, uint32_t virt,
        struct armv7a_common *armv7a = target_to_armv7a(target);
        struct arm_dpm *dpm = armv7a->arm.dpm;
        struct armv7a_cache_common *armv7a_cache = &armv7a->armv7a_mmu.armv7a_cache;
-       uint32_t i, linelen = armv7a_cache->dminline;
+       uint32_t linelen = armv7a_cache->dminline;
+       uint32_t va_line, va_end;
        int retval;
 
        retval = armv7a_l1_d_cache_sanity_check(target);
@@ -239,15 +273,19 @@ int armv7a_l1_d_cache_flush_virt(struct target *target, uint32_t virt,
        if (retval != ERROR_OK)
                goto done;
 
-       for (i = 0; i < size; i += linelen) {
-               uint32_t offs = virt + i;
+       va_line = virt & (-linelen);
+       va_end = virt + size;
 
+       while (va_line < va_end) {
                /* DCCIMVAC */
                retval = dpm->instr_write_data_r0(dpm,
-                               ARMV4_5_MCR(15, 0, 0, 7, 14, 1), offs);
+                               ARMV4_5_MCR(15, 0, 0, 7, 14, 1), va_line);
                if (retval != ERROR_OK)
                        goto done;
+               va_line += linelen;
        }
+
+       dpm->finish(dpm);
        return retval;
 
 done:

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)