cortex_a : optimize apb read/write access.
[openocd.git] / src / target / arm_dpm.h
index 5d75ed4121f5730bada76e060a590b8d821eb658..8d2638e2a3b8034ac60f8f0bc36021f77c685963 100644 (file)
@@ -100,7 +100,7 @@ struct arm_dpm {
         * must currently be disabled.  Indices 0..15 are used for
         * breakpoints; indices 16..31 are for watchpoints.
         */
-       int (*bpwp_enable)(struct arm_dpm *, unsigned index,
+       int (*bpwp_enable)(struct arm_dpm *, unsigned index_value,
                        uint32_t addr, uint32_t control);
 
        /**
@@ -108,7 +108,7 @@ struct arm_dpm {
         * hardware control registers.  Indices are the same ones
         * accepted by bpwp_enable().
         */
-       int (*bpwp_disable)(struct arm_dpm *, unsigned index);
+       int (*bpwp_disable)(struct arm_dpm *, unsigned index_value);
 
        /* The breakpoint and watchpoint arrays are private to the
         * DPM infrastructure.  There are nbp indices in the dbp
@@ -126,31 +126,77 @@ struct arm_dpm {
        /** Recent value of DSCR. */
        uint32_t dscr;
 
-       // FIXME -- read/write DCSR methods and symbols
+       /* FIXME -- read/write DCSR methods and symbols */
 };
 
 int arm_dpm_setup(struct arm_dpm *dpm);
 int arm_dpm_initialize(struct arm_dpm *dpm);
 
 int arm_dpm_read_current_registers(struct arm_dpm *);
+int dpm_modeswitch(struct arm_dpm *dpm, enum arm_mode mode);
+
+
 int arm_dpm_write_dirty_registers(struct arm_dpm *, bool bpwp);
 
 void arm_dpm_report_wfar(struct arm_dpm *, uint32_t wfar);
 
-/* Subset of DSCR bits; see ARMv7a arch spec section C10.3.1.
+/* DSCR bits; see ARMv7a arch spec section C10.3.1.
  * Not all v7 bits are valid in v6.
  */
-#define DSCR_CORE_HALTED       (1 << 0)
-#define DSCR_CORE_RESTARTED    (1 << 1)
-#define DSCR_INT_DIS           (1 << 11)
-#define DSCR_ITR_EN            (1 << 13)
-#define DSCR_HALT_DBG_MODE     (1 << 14)
-#define DSCR_MON_DBG_MODE      (1 << 15)
-#define DSCR_INSTR_COMP                (1 << 24)
-#define DSCR_DTR_TX_FULL       (1 << 29)
-#define DSCR_DTR_RX_FULL       (1 << 30)
-
-#define DSCR_ENTRY(dscr) (((dscr) >> 2) & 0xf)
+#define DSCR_CORE_HALTED            (0x1 <<  0)
+#define DSCR_CORE_RESTARTED         (0x1 <<  1)
+#define DSCR_ENTRY_MASK             (0xF <<  2)
+#define DSCR_STICKY_ABORT_PRECISE   (0x1 <<  6)
+#define DSCR_STICKY_ABORT_IMPRECISE (0x1 <<  7)
+#define DSCR_STICKY_UNDEFINED       (0x1 <<  8)
+#define DSCR_DBG_NOPWRDWN           (0x1 <<  9) /* v6 only */
+#define DSCR_DBG_ACK                (0x1 << 10)
+#define DSCR_INT_DIS                (0x1 << 11)
+#define DSCR_CP14_USR_COMMS         (0x1 << 12)
+#define DSCR_ITR_EN                 (0x1 << 13)
+#define DSCR_HALT_DBG_MODE          (0x1 << 14)
+#define DSCR_MON_DBG_MODE           (0x1 << 15)
+#define DSCR_SEC_PRIV_INVASV_DIS    (0x1 << 16)
+#define DSCR_SEC_PRIV_NINVASV_DIS   (0x1 << 17)
+#define DSCR_NON_SECURE             (0x1 << 18)
+#define DSCR_DSCRD_IMPRECISE_ABORT  (0x1 << 19)
+#define DSCR_EXT_DCC_MASK           (0x3 << 20) /* DTR mode */  /* bits 22, 23 are reserved */
+#define DSCR_INSTR_COMP             (0x1 << 24)
+#define DSCR_PIPE_ADVANCE           (0x1 << 25)
+#define DSCR_DTRTX_FULL_LATCHED     (0x1 << 26)
+#define DSCR_DTRRX_FULL_LATCHED     (0x1 << 27) /* bit 28 is reserved */
+#define DSCR_DTR_TX_FULL            (0x1 << 29)
+#define DSCR_DTR_RX_FULL            (0x1 << 30) /* bit 31 is reserved */
+
+#define DSCR_ENTRY(dscr)            (((dscr) >> 2) & 0xf)
+#define DSCR_RUN_MODE(dscr)         ((dscr) & (DSCR_CORE_HALTED | DSCR_CORE_RESTARTED))
+
+
+/* Methods of entry into debug mode */
+#define DSCR_ENTRY_HALT_REQ           (0x0 << 2)
+#define DSCR_ENTRY_BREAKPOINT         (0x1 << 2)
+#define DSCR_ENTRY_IMPRECISE_WATCHPT  (0x2 << 2)
+#define DSCR_ENTRY_BKPT_INSTR         (0x3 << 2)
+#define DSCR_ENTRY_EXT_DBG_REQ        (0x4 << 2)
+#define DSCR_ENTRY_VECT_CATCH         (0x5 << 2)
+#define DSCR_ENTRY_D_SIDE_ABORT       (0x6 << 2)  /* v6 only */
+#define DSCR_ENTRY_I_SIDE_ABORT       (0x7 << 2)  /* v6 only */
+#define DSCR_ENTRY_OS_UNLOCK          (0x8 << 2)
+#define DSCR_ENTRY_PRECISE_WATCHPT    (0xA << 2)
+
+/* DTR modes */
+#define DSCR_EXT_DCC_NON_BLOCKING     (0x0 << 20)
+#define DSCR_EXT_DCC_STALL_MODE       (0x1 << 20)
+#define DSCR_EXT_DCC_FAST_MODE        (0x2 << 20)  /* bits 22, 23 are reserved */
+
+
+
+
+
+/* DRCR (debug run control register) bits */
+#define DRCR_HALT                              (1 << 0)
+#define DRCR_RESTART                   (1 << 1)
+#define DRCR_CLEAR_EXCEPTIONS  (1 << 2)
 
 void arm_dpm_report_dscr(struct arm_dpm *dpm, uint32_t dcsr);
 

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)