/***************************************************************************
* Copyright (C) 2008 digenius technology GmbH. *
+ * Michael Bruck *
* *
- * Copyright (C) 2008 Oyvind Harboe oyvind.harboe@zylin.com *
+ * Copyright (C) 2008,2009 Oyvind Harboe oyvind.harboe@zylin.com *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
-#include "arm11.h"
-#include "jtag.h"
-#include "log.h"
+#include "arm_jtag.h"
+#include "arm11_dbgtap.h"
-#include <stdlib.h>
-#include <string.h>
+#include <helper/time_support.h>
#if 0
-#define JTAG_DEBUG(expr ...) DEBUG(expr)
+#define JTAG_DEBUG(expr ...) do { if (1) \
+ LOG_DEBUG(expr); } while (0)
#else
-#define JTAG_DEBUG(expr ...) do {} while(0)
+#define JTAG_DEBUG(expr ...) do { if (0) \
+ LOG_DEBUG(expr); } while (0)
#endif
/*
Conversely there may be other places in this code where the ARM11 code relies
on the driver to hit through RTI when coming from Update-?R.
*/
-tap_state_t arm11_move_pi_to_si_via_ci[] =
-{
- TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_IRCAPTURE, TAP_IRSHIFT
+static const tap_state_t arm11_move_pi_to_si_via_ci[] = {
+ TAP_IREXIT2, TAP_IRUPDATE, TAP_DRSELECT, TAP_IRSELECT, TAP_IRCAPTURE, TAP_IRSHIFT
};
-
-int arm11_add_ir_scan_vc(int num_fields, scan_field_t *fields, tap_state_t state)
+/* REVISIT no error handling here! */
+static void arm11_add_ir_scan_vc(struct jtag_tap *tap, struct scan_field *fields,
+ tap_state_t state)
{
if (cmd_queue_cur_state == TAP_IRPAUSE)
- jtag_add_pathmove(asizeof(arm11_move_pi_to_si_via_ci), arm11_move_pi_to_si_via_ci);
+ jtag_add_pathmove(ARRAY_SIZE(arm11_move_pi_to_si_via_ci),
+ arm11_move_pi_to_si_via_ci);
- jtag_add_ir_scan(num_fields, fields, state);
- return ERROR_OK;
+ jtag_add_ir_scan(tap, fields, state);
}
-tap_state_t arm11_move_pd_to_sd_via_cd[] =
-{
+static const tap_state_t arm11_move_pd_to_sd_via_cd[] = {
TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
};
-int arm11_add_dr_scan_vc(int num_fields, scan_field_t *fields, tap_state_t state)
+/* REVISIT no error handling here! */
+void arm11_add_dr_scan_vc(struct jtag_tap *tap, int num_fields, struct scan_field *fields,
+ tap_state_t state)
{
if (cmd_queue_cur_state == TAP_DRPAUSE)
- jtag_add_pathmove(asizeof(arm11_move_pd_to_sd_via_cd), arm11_move_pd_to_sd_via_cd);
+ jtag_add_pathmove(ARRAY_SIZE(arm11_move_pd_to_sd_via_cd),
+ arm11_move_pd_to_sd_via_cd);
- jtag_add_dr_scan(num_fields, fields, state);
- return ERROR_OK;
+ jtag_add_dr_scan(tap, num_fields, fields, state);
}
-/** Code de-clutter: Construct scan_field_t to write out a value
+/** Code de-clutter: Construct struct scan_field to write out a value
*
* \param arm11 Target state variable.
* \param num_bits Length of the data field
* \param out_data pointer to the data that will be sent out
- * <em>(data is read when it is added to the JTAG queue)</em>
+ * <em > (data is read when it is added to the JTAG queue)</em>
* \param in_data pointer to the memory that will receive data that was clocked in
- * <em>(data is written when the JTAG queue is executed)</em>
+ * <em > (data is written when the JTAG queue is executed)</em>
* \param field target data structure that will be initialized
*/
-void arm11_setup_field(arm11_common_t * arm11, int num_bits, void * out_data, void * in_data, scan_field_t * field)
+void arm11_setup_field(struct arm11_common *arm11, int num_bits,
+ void *out_data, void *in_data, struct scan_field *field)
{
- field->tap = arm11->jtag_info.tap;
- field->num_bits = num_bits;
- field->in_check_mask = NULL;
- field->in_check_value = NULL;
- field->in_handler = NULL;
- field->in_handler_priv = NULL;
-
- field->out_value = out_data;
- field->in_value = in_data;
+ field->num_bits = num_bits;
+ field->out_value = out_data;
+ field->in_value = in_data;
}
+static const char *arm11_ir_to_string(uint8_t ir)
+{
+ const char *s = "unknown";
+
+ switch (ir) {
+ case ARM11_EXTEST:
+ s = "EXTEST";
+ break;
+ case ARM11_SCAN_N:
+ s = "SCAN_N";
+ break;
+ case ARM11_RESTART:
+ s = "RESTART";
+ break;
+ case ARM11_HALT:
+ s = "HALT";
+ break;
+ case ARM11_INTEST:
+ s = "INTEST";
+ break;
+ case ARM11_ITRSEL:
+ s = "ITRSEL";
+ break;
+ case ARM11_IDCODE:
+ s = "IDCODE";
+ break;
+ case ARM11_BYPASS:
+ s = "BYPASS";
+ break;
+ }
+ return s;
+}
/** Write JTAG instruction register
*
*
* \remarks This adds to the JTAG command queue but does \em not execute it.
*/
-void arm11_add_IR(arm11_common_t * arm11, u8 instr, tap_state_t state)
+void arm11_add_IR(struct arm11_common *arm11, uint8_t instr, tap_state_t state)
{
- jtag_tap_t *tap;
- tap = arm11->jtag_info.tap;
+ struct jtag_tap *tap = arm11->arm.target->tap;
- if (buf_get_u32(tap->cur_instr, 0, 5) == instr)
- {
+ if (buf_get_u32(tap->cur_instr, 0, 5) == instr) {
JTAG_DEBUG("IR <= 0x%02x SKIPPED", instr);
return;
}
- JTAG_DEBUG("IR <= 0x%02x", instr);
+ JTAG_DEBUG("IR <= %s (0x%02x)", arm11_ir_to_string(instr), instr);
- scan_field_t field;
+ struct scan_field field;
arm11_setup_field(arm11, 5, &instr, NULL, &field);
- arm11_add_ir_scan_vc(1, &field, state == ARM11_TAP_DEFAULT ? TAP_IRPAUSE : state);
+ arm11_add_ir_scan_vc(arm11->arm.target->tap,
+ &field,
+ state == ARM11_TAP_DEFAULT ? TAP_IRPAUSE : state);
}
-/** Verify shifted out data from Scan Chain Register (SCREG)
- * Used as parameter to scan_field_t::in_handler in
- * arm11_add_debug_SCAN_N().
- *
- */
-static int arm11_in_handler_SCAN_N(u8 *in_value, void *priv, struct scan_field_s *field)
+/** Verify data shifted out from Scan Chain Register (SCREG). */
+static void arm11_in_handler_SCAN_N(uint8_t *in_value)
{
- /** \todo TODO: clarify why this isnt properly masked in jtag.c jtag_read_buffer() */
- u8 v = *in_value & 0x1F;
+ /* Don't expect JTAG layer to modify bits we didn't ask it to read */
+ uint8_t v = *in_value & 0x1F;
- if (v != 0x10)
- {
- LOG_ERROR("'arm11 target' JTAG communication error SCREG SCAN OUT 0x%02x (expected 0x10)", v);
- return ERROR_FAIL;
+ if (v != 0x10) {
+ LOG_ERROR("'arm11 target' JTAG error SCREG OUT 0x%02x", v);
+ jtag_set_error(ERROR_FAIL);
}
-
- JTAG_DEBUG("SCREG SCAN OUT 0x%02x", v);
- return ERROR_OK;
}
/** Select and write to Scan Chain Register (SCREG)
* \param state Pass the final TAP state or ARM11_TAP_DEFAULT for the default
* value (Pause-DR).
*
+ * Changes the current scan chain if needed, transitions to the specified
+ * TAP state, and leaves the IR undefined.
+ *
* The chain takes effect when Update-DR is passed (usually when subsequently
* the INTEXT/EXTEST instructions are written).
*
* \remarks This adds to the JTAG command queue but does \em not execute it.
*/
-void arm11_add_debug_SCAN_N(arm11_common_t * arm11, u8 chain, tap_state_t state)
+int arm11_add_debug_SCAN_N(struct arm11_common *arm11,
+ uint8_t chain, tap_state_t state)
{
- JTAG_DEBUG("SCREG <= 0x%02x", chain);
+ /* Don't needlessly switch the scan chain.
+ * NOTE: the ITRSEL instruction fakes SCREG changing;
+ * but leaves its actual value unchanged.
+ */
+#if 0
+ /* FIX!!! the optimization below is broken because we do not */
+ /* invalidate the cur_scan_chain upon a TRST/TMS. See arm_jtag.c */
+ /* for example on how to invalidate cur_scan_chain. Tested patches gladly */
+ /* accepted! */
+ if (arm11->jtag_info.cur_scan_chain == chain) {
+ JTAG_DEBUG("SCREG <= %d SKIPPED", chain);
+ return jtag_add_statemove((state == ARM11_TAP_DEFAULT)
+ ? TAP_DRPAUSE : state);
+ }
+#endif
+ JTAG_DEBUG("SCREG <= %d", chain);
arm11_add_IR(arm11, ARM11_SCAN_N, ARM11_TAP_DEFAULT);
- scan_field_t field;
+ struct scan_field field;
+
+ uint8_t tmp[1];
+ arm11_setup_field(arm11, 5, &chain, &tmp, &field);
- arm11_setup_field(arm11, 5, &chain, NULL, &field);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap,
+ 1,
+ &field,
+ state == ARM11_TAP_DEFAULT ? TAP_DRPAUSE : state);
- field.in_handler = arm11_in_handler_SCAN_N; /* deprecated! invoke this from user code! */
+ jtag_execute_queue_noclear();
- arm11_add_dr_scan_vc(1, &field, state == ARM11_TAP_DEFAULT ? TAP_DRPAUSE : state);
+ arm11_in_handler_SCAN_N(tmp);
+
+ arm11->jtag_info.cur_scan_chain = chain;
+
+ return jtag_execute_queue();
}
-/** Write an instruction into the ITR register
+/**
+ * Queue a DR scan of the ITR register. Caller must have selected
+ * scan chain 4 (ITR), possibly using ITRSEL.
*
* \param arm11 Target state variable.
* \param inst An ARM11 processor instruction/opcode.
- * \param flag Optional parameter to retrieve the InstCompl flag
- * (this will be written when the JTAG chain is executed).
- * \param state Pass the final TAP state or ARM11_TAP_DEFAULT for the default
- * value (Run-Test/Idle).
+ * \param flag Optional parameter to retrieve the Ready flag;
+ * this address will be written when the JTAG chain is scanned.
+ * \param state The TAP state to enter after the DR scan.
*
- * \remarks By default this ends with Run-Test/Idle state
- * and causes the instruction to be executed. If
- * a subsequent write to DTR is needed before
- * executing the instruction then TAP_DRPAUSE should be
- * passed to \p state.
+ * Going through the TAP_DRUPDATE state writes ITR only if Ready was
+ * previously set. Only the Ready flag is readable by the scan.
*
- * \remarks This adds to the JTAG command queue but does \em not execute it.
+ * An instruction loaded into ITR is executed when going through the
+ * TAP_IDLE state only if Ready was previously set and the debug state
+ * is properly set up. Depending on the instruction, you may also need
+ * to ensure that the rDTR is ready before that Run-Test/Idle state.
*/
-void arm11_add_debug_INST(arm11_common_t * arm11, u32 inst, u8 * flag, tap_state_t state)
+static void arm11_add_debug_INST(struct arm11_common *arm11,
+ uint32_t inst, uint8_t *flag, tap_state_t state)
{
- JTAG_DEBUG("INST <= 0x%08x", inst);
+ JTAG_DEBUG("INST <= 0x%08x", (unsigned) inst);
- scan_field_t itr[2];
+ struct scan_field itr[2];
- arm11_setup_field(arm11, 32, &inst, NULL, itr + 0);
- arm11_setup_field(arm11, 1, NULL, flag, itr + 1);
+ arm11_setup_field(arm11, 32, &inst, NULL, itr + 0);
+ arm11_setup_field(arm11, 1, NULL, flag, itr + 1);
- arm11_add_dr_scan_vc(asizeof(itr), itr, state == ARM11_TAP_DEFAULT ? TAP_IDLE : state);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(itr), itr, state);
}
-/** Read the Debug Status and Control Register (DSCR)
- *
- * same as CP14 c1
+/**
+ * Read and save the Debug Status and Control Register (DSCR).
*
* \param arm11 Target state variable.
- * \return DSCR content
+ * \return Error status; arm11->dscr is updated on success.
*
- * \remarks This is a stand-alone function that executes the JTAG command queue.
+ * \remarks This is a stand-alone function that executes the JTAG
+ * command queue. It does not require the ARM11 debug TAP to be
+ * in any particular state.
*/
-int arm11_read_DSCR(arm11_common_t * arm11, u32 *value)
+int arm11_read_DSCR(struct arm11_common *arm11)
{
- arm11_add_debug_SCAN_N(arm11, 0x01, ARM11_TAP_DEFAULT);
+ int retval;
+
+ retval = arm11_add_debug_SCAN_N(arm11, 0x01, ARM11_TAP_DEFAULT);
+ if (retval != ERROR_OK)
+ return retval;
arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
- u32 dscr;
- scan_field_t chain1_field;
+ uint32_t dscr;
+ struct scan_field chain1_field;
arm11_setup_field(arm11, 32, NULL, &dscr, &chain1_field);
- arm11_add_dr_scan_vc(1, &chain1_field, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, 1, &chain1_field, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
- if (arm11->last_dscr != dscr)
- JTAG_DEBUG("DSCR = %08x (OLD %08x)", dscr, arm11->last_dscr);
-
- arm11->last_dscr = dscr;
+ if (arm11->dscr != dscr)
+ JTAG_DEBUG("DSCR = %08x (OLD %08x)",
+ (unsigned) dscr,
+ (unsigned) arm11->dscr);
- *value=dscr;
+ arm11->dscr = dscr;
return ERROR_OK;
}
*
* \remarks This is a stand-alone function that executes the JTAG command queue.
*/
-int arm11_write_DSCR(arm11_common_t * arm11, u32 dscr)
+int arm11_write_DSCR(struct arm11_common *arm11, uint32_t dscr)
{
- arm11_add_debug_SCAN_N(arm11, 0x01, ARM11_TAP_DEFAULT);
+ int retval;
+ retval = arm11_add_debug_SCAN_N(arm11, 0x01, ARM11_TAP_DEFAULT);
+ if (retval != ERROR_OK)
+ return retval;
arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
- scan_field_t chain1_field;
+ struct scan_field chain1_field;
arm11_setup_field(arm11, 32, &dscr, NULL, &chain1_field);
- arm11_add_dr_scan_vc(1, &chain1_field, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, 1, &chain1_field, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
- JTAG_DEBUG("DSCR <= %08x (OLD %08x)", dscr, arm11->last_dscr);
+ JTAG_DEBUG("DSCR <= %08x (OLD %08x)",
+ (unsigned) dscr,
+ (unsigned) arm11->dscr);
- arm11->last_dscr = dscr;
+ arm11->dscr = dscr;
return ERROR_OK;
}
-
-
-/** Get the debug reason from Debug Status and Control Register (DSCR)
- *
- * \param dscr DSCR value to analyze
- * \return Debug reason
- *
- */
-enum target_debug_reason arm11_get_DSCR_debug_reason(u32 dscr)
-{
- switch (dscr & ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_MASK)
- {
- case ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_HALT:
- LOG_INFO("Debug entry: JTAG HALT");
- return DBG_REASON_DBGRQ;
-
- case ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BREAKPOINT:
- LOG_INFO("Debug entry: breakpoint");
- return DBG_REASON_BREAKPOINT;
-
- case ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_WATCHPOINT:
- LOG_INFO("Debug entry: watchpoint");
- return DBG_REASON_WATCHPOINT;
-
- case ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BKPT_INSTRUCTION:
- LOG_INFO("Debug entry: BKPT instruction");
- return DBG_REASON_BREAKPOINT;
-
- case ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_EDBGRQ:
- LOG_INFO("Debug entry: EDBGRQ signal");
- return DBG_REASON_DBGRQ;
-
- case ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_VECTOR_CATCH:
- LOG_INFO("Debug entry: VCR vector catch");
- return DBG_REASON_BREAKPOINT;
-
- default:
- LOG_INFO("Debug entry: unknown");
- return DBG_REASON_DBGRQ;
- }
-};
-
-
-
/** Prepare the stage for ITR/DTR operations
* from the arm11_run_instr... group of functions.
*
* \param arm11 Target state variable.
*
*/
-void arm11_run_instr_data_prepare(arm11_common_t * arm11)
+int arm11_run_instr_data_prepare(struct arm11_common *arm11)
{
- arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
+ return arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
}
/** Cleanup after ITR/DTR operations
* \param arm11 Target state variable.
*
*/
-void arm11_run_instr_data_finish(arm11_common_t * arm11)
+int arm11_run_instr_data_finish(struct arm11_common *arm11)
{
- arm11_add_debug_SCAN_N(arm11, 0x00, ARM11_TAP_DEFAULT);
+ return arm11_add_debug_SCAN_N(arm11, 0x00, ARM11_TAP_DEFAULT);
}
-
-/** Execute one or multiple instructions via ITR
+/**
+ * Execute one or more instructions via ITR.
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
*
* \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
*
* \param count Number of opcodes to execute
*
*/
-int arm11_run_instr_no_data(arm11_common_t * arm11, u32 * opcode, size_t count)
+static
+int arm11_run_instr_no_data(struct arm11_common *arm11,
+ uint32_t *opcode, size_t count)
{
arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
- while (count--)
- {
+ while (count--) {
arm11_add_debug_INST(arm11, *opcode++, NULL, TAP_IDLE);
- while (1)
- {
- u8 flag;
+ int i = 0;
+ while (1) {
+ uint8_t flag;
arm11_add_debug_INST(arm11, 0, &flag, count ? TAP_IDLE : TAP_DRPAUSE);
if (flag)
break;
+
+ long long then = 0;
+
+ if (i == 1000)
+ then = timeval_ms();
+ if (i >= 1000) {
+ if ((timeval_ms()-then) > 1000) {
+ LOG_WARNING(
+ "Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+
+ i++;
}
}
* \param opcode ARM opcode
*
*/
-void arm11_run_instr_no_data1(arm11_common_t * arm11, u32 opcode)
+int arm11_run_instr_no_data1(struct arm11_common *arm11, uint32_t opcode)
{
- arm11_run_instr_no_data(arm11, &opcode, 1);
+ return arm11_run_instr_no_data(arm11, &opcode, 1);
}
/** Execute one instruction via ITR repeatedly while
* passing data to the core via DTR on each execution.
*
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
* The executed instruction \em must read data from DTR.
*
* \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
* \param count Number of data words and instruction repetitions
*
*/
-int arm11_run_instr_data_to_core(arm11_common_t * arm11, u32 opcode, u32 * data, size_t count)
+int arm11_run_instr_data_to_core(struct arm11_common *arm11,
+ uint32_t opcode,
+ uint32_t *data,
+ size_t count)
{
arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
- scan_field_t chain5_fields[3];
+ struct scan_field chain5_fields[3];
- u32 Data;
- u8 Ready;
- u8 nRetry;
+ uint32_t Data;
+ uint8_t Ready;
+ uint8_t nRetry;
- arm11_setup_field(arm11, 32, &Data, NULL, chain5_fields + 0);
- arm11_setup_field(arm11, 1, NULL, &Ready, chain5_fields + 1);
- arm11_setup_field(arm11, 1, NULL, &nRetry, chain5_fields + 2);
+ arm11_setup_field(arm11, 32, &Data, NULL, chain5_fields + 0);
+ arm11_setup_field(arm11, 1, NULL, &Ready, chain5_fields + 1);
+ arm11_setup_field(arm11, 1, NULL, &nRetry, chain5_fields + 2);
- while (count--)
- {
- do
- {
- Data = *data;
+ while (count--) {
+ int i = 0;
+ do {
+ Data = *data;
- arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_IDLE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(
+ chain5_fields), chain5_fields, TAP_IDLE);
CHECK_RETVAL(jtag_execute_queue());
JTAG_DEBUG("DTR Ready %d nRetry %d", Ready, nRetry);
- }
- while (!Ready);
+
+ long long then = 0;
+
+ if (i == 1000)
+ then = timeval_ms();
+ if (i >= 1000) {
+ if ((timeval_ms()-then) > 1000) {
+ LOG_WARNING(
+ "Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+
+ i++;
+ } while (!Ready);
data++;
}
arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
- do
- {
- Data = 0;
+ int i = 0;
+ do {
+ Data = 0;
- arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(
+ chain5_fields), chain5_fields, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
- JTAG_DEBUG("DTR Data %08x Ready %d nRetry %d", Data, Ready, nRetry);
- }
- while (!Ready);
+ JTAG_DEBUG("DTR Data %08x Ready %d nRetry %d",
+ (unsigned) Data, Ready, nRetry);
+
+ long long then = 0;
+
+ if (i == 1000)
+ then = timeval_ms();
+ if (i >= 1000) {
+ if ((timeval_ms()-then) > 1000) {
+ LOG_WARNING("Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+
+ i++;
+ } while (!Ready);
return ERROR_OK;
}
*
* To disable this code, try "memwrite burst false"
*
+ * FIX!!! should we use multiple TAP_IDLE here or not???
+ *
+ * https://lists.berlios.de/pipermail/openocd-development/2009-July/009698.html
+ * https://lists.berlios.de/pipermail/openocd-development/2009-August/009865.html
*/
-tap_state_t arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay[] =
-{
- TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
+static const tap_state_t arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay[] = {
+ TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE,
+ TAP_DRSHIFT
};
+/* This inner loop can be implemented by the minidriver, oftentimes in hardware... The
+ * minidriver can call the default implementation as a fallback or implement it
+ * from scratch.
+ */
+int arm11_run_instr_data_to_core_noack_inner_default(struct jtag_tap *tap,
+ uint32_t opcode,
+ uint32_t *data,
+ size_t count)
+{
+ struct scan_field chain5_fields[3];
+
+ chain5_fields[0].num_bits = 32;
+ chain5_fields[0].out_value = NULL; /*&Data*/
+ chain5_fields[0].in_value = NULL;
+
+ chain5_fields[1].num_bits = 1;
+ chain5_fields[1].out_value = NULL;
+ chain5_fields[1].in_value = NULL; /*&Ready*/
+ chain5_fields[2].num_bits = 1;
+ chain5_fields[2].out_value = NULL;
+ chain5_fields[2].in_value = NULL;
+
+ uint8_t *Readies;
+ unsigned readiesNum = count;
+ unsigned bytes = sizeof(*Readies)*readiesNum;
+
+ Readies = (uint8_t *) malloc(bytes);
+ if (Readies == NULL) {
+ LOG_ERROR("Out of memory allocating %u bytes", bytes);
+ return ERROR_FAIL;
+ }
+
+ uint8_t *ReadyPos = Readies;
+ while (count--) {
+ chain5_fields[0].out_value = (uint8_t *)(data++);
+ chain5_fields[1].in_value = ReadyPos++;
+
+ if (count > 0) {
+ jtag_add_dr_scan(tap, ARRAY_SIZE(chain5_fields), chain5_fields,
+ TAP_DRPAUSE);
+ jtag_add_pathmove(ARRAY_SIZE(arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay),
+ arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay);
+ } else
+ jtag_add_dr_scan(tap, ARRAY_SIZE(chain5_fields), chain5_fields, TAP_IDLE);
+ }
+
+ int retval = jtag_execute_queue();
+ if (retval == ERROR_OK) {
+ unsigned error_count = 0;
+
+ for (size_t i = 0; i < readiesNum; i++) {
+ if (Readies[i] != 1)
+ error_count++;
+ }
+
+ if (error_count > 0) {
+ LOG_ERROR("%u words out of %u not transferred",
+ error_count, readiesNum);
+ retval = ERROR_FAIL;
+ }
+ }
+ free(Readies);
+
+ return retval;
+}
+
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap *tap,
+ uint32_t opcode,
+ uint32_t *data,
+ size_t count);
+
+#ifndef HAVE_JTAG_MINIDRIVER_H
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap *tap,
+ uint32_t opcode,
+ uint32_t *data,
+ size_t count)
+{
+ return arm11_run_instr_data_to_core_noack_inner_default(tap, opcode, data, count);
+}
+#endif
/** Execute one instruction via ITR repeatedly while
* passing data to the core via DTR on each execution.
*
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
* No Ready check during transmission.
*
* The executed instruction \em must read data from DTR.
* \param count Number of data words and instruction repetitions
*
*/
-int arm11_run_instr_data_to_core_noack(arm11_common_t * arm11, u32 opcode, u32 * data, size_t count)
+int arm11_run_instr_data_to_core_noack(struct arm11_common *arm11,
+ uint32_t opcode,
+ uint32_t *data,
+ size_t count)
{
arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
- scan_field_t chain5_fields[3];
-
- arm11_setup_field(arm11, 32, NULL/*&Data*/, NULL, chain5_fields + 0);
- arm11_setup_field(arm11, 1, NULL, NULL /*&Ready*/, chain5_fields + 1);
- arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
-
- u8 Readies[count + 1];
- u8 * ReadyPos = Readies;
+ int retval = arm11_run_instr_data_to_core_noack_inner(arm11->arm.target->tap,
+ opcode,
+ data,
+ count);
- while (count--)
- {
- chain5_fields[0].out_value = (void *)(data++);
- chain5_fields[1].in_value = ReadyPos++;
-
- if (count)
- {
- jtag_add_dr_scan(asizeof(chain5_fields), chain5_fields, TAP_DRPAUSE);
- jtag_add_pathmove(asizeof(arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay),
- arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay);
- }
- else
- {
- jtag_add_dr_scan(asizeof(chain5_fields), chain5_fields, TAP_IDLE);
- }
- }
+ if (retval != ERROR_OK)
+ return retval;
arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
- chain5_fields[0].out_value = 0;
- chain5_fields[1].in_value = ReadyPos++;
-
- arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, TAP_DRPAUSE);
-
- CHECK_RETVAL(jtag_execute_queue());
-
- size_t error_count = 0;
-
- {size_t i;
- for (i = 0; i < asizeof(Readies); i++)
- {
- if (Readies[i] != 1)
- {
- error_count++;
+ struct scan_field chain5_fields[3];
+
+ arm11_setup_field(arm11,
+ 32,
+ NULL /*&Data*/,
+ NULL,
+ chain5_fields + 0);
+ arm11_setup_field(arm11,
+ 1,
+ NULL,
+ NULL /*&Ready*/,
+ chain5_fields + 1);
+ arm11_setup_field(arm11,
+ 1,
+ NULL,
+ NULL,
+ chain5_fields + 2);
+
+ uint8_t ready_flag;
+ chain5_fields[1].in_value = &ready_flag;
+
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(
+ chain5_fields), chain5_fields, TAP_DRPAUSE);
+
+ retval = jtag_execute_queue();
+ if (retval == ERROR_OK) {
+ if (ready_flag != 1) {
+ LOG_ERROR("last word not transferred");
+ retval = ERROR_FAIL;
}
- }}
-
- if (error_count)
- LOG_ERROR("Transfer errors " ZU, error_count);
+ }
- return ERROR_OK;
+ return retval;
}
* \param data Data word to be passed to the core via DTR
*
*/
-int arm11_run_instr_data_to_core1(arm11_common_t * arm11, u32 opcode, u32 data)
+int arm11_run_instr_data_to_core1(struct arm11_common *arm11, uint32_t opcode, uint32_t data)
{
return arm11_run_instr_data_to_core(arm11, opcode, &data, 1);
}
/** Execute one instruction via ITR repeatedly while
* reading data from the core via DTR on each execution.
*
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
* The executed instruction \em must write data to DTR.
*
* \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
* \param count Number of data words and instruction repetitions
*
*/
-int arm11_run_instr_data_from_core(arm11_common_t * arm11, u32 opcode, u32 * data, size_t count)
+int arm11_run_instr_data_from_core(struct arm11_common *arm11,
+ uint32_t opcode,
+ uint32_t *data,
+ size_t count)
{
arm11_add_IR(arm11, ARM11_ITRSEL, ARM11_TAP_DEFAULT);
arm11_add_IR(arm11, ARM11_INTEST, ARM11_TAP_DEFAULT);
- scan_field_t chain5_fields[3];
+ struct scan_field chain5_fields[3];
- u32 Data;
- u8 Ready;
- u8 nRetry;
+ uint32_t Data;
+ uint8_t Ready;
+ uint8_t nRetry;
- arm11_setup_field(arm11, 32, NULL, &Data, chain5_fields + 0);
- arm11_setup_field(arm11, 1, NULL, &Ready, chain5_fields + 1);
- arm11_setup_field(arm11, 1, NULL, &nRetry, chain5_fields + 2);
+ arm11_setup_field(arm11, 32, NULL, &Data, chain5_fields + 0);
+ arm11_setup_field(arm11, 1, NULL, &Ready, chain5_fields + 1);
+ arm11_setup_field(arm11, 1, NULL, &nRetry, chain5_fields + 2);
- while (count--)
- {
- do
- {
- arm11_add_dr_scan_vc(asizeof(chain5_fields), chain5_fields, count ? TAP_IDLE : TAP_DRPAUSE);
+ while (count--) {
+ int i = 0;
+ do {
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(
+ chain5_fields), chain5_fields,
+ count ? TAP_IDLE : TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
- JTAG_DEBUG("DTR Data %08x Ready %d nRetry %d", Data, Ready, nRetry);
- }
- while (!Ready);
+ JTAG_DEBUG("DTR Data %08x Ready %d nRetry %d",
+ (unsigned) Data, Ready, nRetry);
+
+ long long then = 0;
+
+ if (i == 1000)
+ then = timeval_ms();
+ if (i >= 1000) {
+ if ((timeval_ms()-then) > 1000) {
+ LOG_WARNING(
+ "Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+
+ i++;
+ } while (!Ready);
*data++ = Data;
}
* \param data Pointer to a data word that receives the value from r0 after \p opcode was executed.
*
*/
-void arm11_run_instr_data_from_core_via_r0(arm11_common_t * arm11, u32 opcode, u32 * data)
+int arm11_run_instr_data_from_core_via_r0(struct arm11_common *arm11,
+ uint32_t opcode,
+ uint32_t *data)
{
- arm11_run_instr_no_data1(arm11, opcode);
+ int retval;
+ retval = arm11_run_instr_no_data1(arm11, opcode);
+ if (retval != ERROR_OK)
+ return retval;
/* MCR p14,0,R0,c0,c5,0 (move r0 -> wDTR -> local var) */
arm11_run_instr_data_from_core(arm11, 0xEE000E15, data, 1);
+
+ return ERROR_OK;
}
/** Load data into core via DTR then move it to r0 then
* \param data Data word that will be written to r0 before \p opcode is executed
*
*/
-void arm11_run_instr_data_to_core_via_r0(arm11_common_t * arm11, u32 opcode, u32 data)
+int arm11_run_instr_data_to_core_via_r0(struct arm11_common *arm11, uint32_t opcode, uint32_t data)
{
+ int retval;
/* MRC p14,0,r0,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xEE100E15, data);
+ retval = arm11_run_instr_data_to_core1(arm11, 0xEE100E15, data);
+ if (retval != ERROR_OK)
+ return retval;
- arm11_run_instr_no_data1(arm11, opcode);
+ retval = arm11_run_instr_no_data1(arm11, opcode);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
}
/** Apply reads and writes to scan chain 7
*
- * \see arm11_sc7_action_t
+ * \see struct arm11_sc7_action
*
* \param arm11 Target state variable.
* \param actions A list of read and/or write instructions
* \param count Number of instructions in the list.
*
*/
-int arm11_sc7_run(arm11_common_t * arm11, arm11_sc7_action_t * actions, size_t count)
+int arm11_sc7_run(struct arm11_common *arm11, struct arm11_sc7_action *actions, size_t count)
{
- arm11_add_debug_SCAN_N(arm11, 0x07, ARM11_TAP_DEFAULT);
+ int retval;
+
+ retval = arm11_add_debug_SCAN_N(arm11, 0x07, ARM11_TAP_DEFAULT);
+ if (retval != ERROR_OK)
+ return retval;
arm11_add_IR(arm11, ARM11_EXTEST, ARM11_TAP_DEFAULT);
- scan_field_t chain7_fields[3];
-
- u8 nRW;
- u32 DataOut;
- u8 AddressOut;
- u8 Ready;
- u32 DataIn;
- u8 AddressIn;
-
- arm11_setup_field(arm11, 1, &nRW, &Ready, chain7_fields + 0);
- arm11_setup_field(arm11, 32, &DataOut, &DataIn, chain7_fields + 1);
- arm11_setup_field(arm11, 7, &AddressOut, &AddressIn, chain7_fields + 2);
-
- {size_t i;
- for (i = 0; i < count + 1; i++)
- {
- if (i < count)
- {
- nRW = actions[i].write ? 1 : 0;
- DataOut = actions[i].value;
- AddressOut = actions[i].address;
- }
- else
- {
- nRW = 0;
- DataOut = 0;
- AddressOut = 0;
+ struct scan_field chain7_fields[3];
+
+ uint8_t nRW;
+ uint32_t DataOut;
+ uint8_t AddressOut;
+ uint8_t Ready;
+ uint32_t DataIn;
+ uint8_t AddressIn;
+
+ arm11_setup_field(arm11, 1, &nRW, &Ready, chain7_fields + 0);
+ arm11_setup_field(arm11, 32, &DataOut, &DataIn, chain7_fields + 1);
+ arm11_setup_field(arm11, 7, &AddressOut, &AddressIn, chain7_fields + 2);
+
+ for (size_t i = 0; i < count + 1; i++) {
+ if (i < count) {
+ nRW = actions[i].write ? 1 : 0;
+ DataOut = actions[i].value;
+ AddressOut = actions[i].address;
+ } else {
+ nRW = 1;
+ DataOut = 0;
+ AddressOut = 0;
}
- do
- {
- JTAG_DEBUG("SC7 <= Address %02x Data %08x nRW %d", AddressOut, DataOut, nRW);
+ /* Timeout here so we don't get stuck. */
+ int i_n = 0;
+ while (1) {
+ JTAG_DEBUG("SC7 <= c%-3d Data %08x %s",
+ (unsigned) AddressOut,
+ (unsigned) DataOut,
+ nRW ? "write" : "read");
- arm11_add_dr_scan_vc(asizeof(chain7_fields), chain7_fields, TAP_DRPAUSE);
+ arm11_add_dr_scan_vc(arm11->arm.target->tap, ARRAY_SIZE(chain7_fields),
+ chain7_fields, TAP_DRPAUSE);
CHECK_RETVAL(jtag_execute_queue());
- JTAG_DEBUG("SC7 => Address %02x Data %08x Ready %d", AddressIn, DataIn, Ready);
+ /* 'nRW' is 'Ready' on read out */
+ if (Ready)
+ break;
+
+ long long then = 0;
+
+ if (i_n == 1000)
+ then = timeval_ms();
+ if (i_n >= 1000) {
+ if ((timeval_ms()-then) > 1000) {
+ LOG_WARNING(
+ "Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+
+ i_n++;
}
- while (!Ready); /* 'nRW' is 'Ready' on read out */
- if (i > 0)
- {
+ if (!nRW)
+ JTAG_DEBUG("SC7 => Data %08x", (unsigned) DataIn);
+
+ if (i > 0) {
if (actions[i - 1].address != AddressIn)
- {
LOG_WARNING("Scan chain 7 shifted out unexpected address");
- }
if (!actions[i - 1].write)
- {
actions[i - 1].value = DataIn;
- }
- else
- {
+ else {
if (actions[i - 1].value != DataIn)
- {
LOG_WARNING("Scan chain 7 shifted out unexpected data");
- }
}
}
- }}
-
- {size_t i;
- for (i = 0; i < count; i++)
- {
- JTAG_DEBUG("SC7 %02d: %02x %s %08x", i, actions[i].address, actions[i].write ? "<=" : "=>", actions[i].value);
- }}
-
+ }
return ERROR_OK;
}
* \param arm11 Target state variable.
*
*/
-void arm11_sc7_clear_vbw(arm11_common_t * arm11)
+int arm11_sc7_clear_vbw(struct arm11_common *arm11)
{
- arm11_sc7_action_t clear_bw[arm11->brp + arm11->wrp + 1];
- arm11_sc7_action_t * pos = clear_bw;
-
- {size_t i;
- for (i = 0; i < asizeof(clear_bw); i++)
- {
- clear_bw[i].write = true;
- clear_bw[i].value = 0;
- }}
+ size_t clear_bw_size = arm11->brp + 1;
+ struct arm11_sc7_action *clear_bw = malloc(sizeof(struct arm11_sc7_action) * clear_bw_size);
+ struct arm11_sc7_action *pos = clear_bw;
- {size_t i;
- for (i = 0; i < arm11->brp; i++)
- (pos++)->address = ARM11_SC7_BCR0 + i;
+ for (size_t i = 0; i < clear_bw_size; i++) {
+ clear_bw[i].write = true;
+ clear_bw[i].value = 0;
}
- {size_t i;
- for (i = 0; i < arm11->wrp; i++)
- (pos++)->address = ARM11_SC7_WCR0 + i;
- }
+ for (size_t i = 0; i < arm11->brp; i++)
+ (pos++)->address = ARM11_SC7_BCR0 + i;
(pos++)->address = ARM11_SC7_VCR;
- arm11_sc7_run(arm11, clear_bw, asizeof(clear_bw));
+ int retval;
+ retval = arm11_sc7_run(arm11, clear_bw, clear_bw_size);
+
+ free(clear_bw);
+
+ return retval;
}
/** Write VCR register
* \param arm11 Target state variable.
* \param value Value to be written
*/
-void arm11_sc7_set_vcr(arm11_common_t * arm11, u32 value)
+int arm11_sc7_set_vcr(struct arm11_common *arm11, uint32_t value)
{
- arm11_sc7_action_t set_vcr;
-
- set_vcr.write = true;
- set_vcr.address = ARM11_SC7_VCR;
- set_vcr.value = value;
+ struct arm11_sc7_action set_vcr;
+ set_vcr.write = true;
+ set_vcr.address = ARM11_SC7_VCR;
+ set_vcr.value = value;
- arm11_sc7_run(arm11, &set_vcr, 1);
+ return arm11_sc7_run(arm11, &set_vcr, 1);
}
-
-
/** Read word from address
*
* \param arm11 Target state variable.
* \param result Pointer where to store result
*
*/
-int arm11_read_memory_word(arm11_common_t * arm11, u32 address, u32 * result)
+int arm11_read_memory_word(struct arm11_common *arm11, uint32_t address, uint32_t *result)
{
- arm11_run_instr_data_prepare(arm11);
+ int retval;
+ retval = arm11_run_instr_data_prepare(arm11);
+ if (retval != ERROR_OK)
+ return retval;
/* MRC p14,0,r0,c0,c5,0 (r0 = address) */
CHECK_RETVAL(arm11_run_instr_data_to_core1(arm11, 0xee100e15, address));
/* LDC p14,c5,[R0],#4 (DTR = [r0]) */
CHECK_RETVAL(arm11_run_instr_data_from_core(arm11, 0xecb05e01, result, 1));
- arm11_run_instr_data_finish(arm11);
+ return arm11_run_instr_data_finish(arm11);
+}
+
+/************************************************************************/
+
+/*
+ * ARM11 provider for the OpenOCD implementation of the standard
+ * architectural ARM v6/v7 "Debug Programmer's Model" (DPM).
+ */
+
+static inline struct arm11_common *dpm_to_arm11(struct arm_dpm *dpm)
+{
+ return container_of(dpm, struct arm11_common, dpm);
+}
+
+static int arm11_dpm_prepare(struct arm_dpm *dpm)
+{
+ return arm11_run_instr_data_prepare(dpm_to_arm11(dpm));
+}
+
+static int arm11_dpm_finish(struct arm_dpm *dpm)
+{
+ return arm11_run_instr_data_finish(dpm_to_arm11(dpm));
+}
+
+static int arm11_dpm_instr_write_data_dcc(struct arm_dpm *dpm,
+ uint32_t opcode, uint32_t data)
+{
+ return arm11_run_instr_data_to_core(dpm_to_arm11(dpm),
+ opcode, &data, 1);
+}
+
+static int arm11_dpm_instr_write_data_r0(struct arm_dpm *dpm,
+ uint32_t opcode, uint32_t data)
+{
+ return arm11_run_instr_data_to_core_via_r0(dpm_to_arm11(dpm),
+ opcode, data);
+}
+
+static int arm11_dpm_instr_read_data_dcc(struct arm_dpm *dpm,
+ uint32_t opcode, uint32_t *data)
+{
+ return arm11_run_instr_data_from_core(dpm_to_arm11(dpm),
+ opcode, data, 1);
+}
+
+static int arm11_dpm_instr_read_data_r0(struct arm_dpm *dpm,
+ uint32_t opcode, uint32_t *data)
+{
+ return arm11_run_instr_data_from_core_via_r0(dpm_to_arm11(dpm),
+ opcode, data);
+}
+
+/* Because arm11_sc7_run() takes a vector of actions, we batch breakpoint
+ * and watchpoint operations instead of running them right away. Since we
+ * pre-allocated our vector, we don't need to worry about space.
+ */
+static int arm11_bpwp_enable(struct arm_dpm *dpm, unsigned index_t,
+ uint32_t addr, uint32_t control)
+{
+ struct arm11_common *arm11 = dpm_to_arm11(dpm);
+ struct arm11_sc7_action *action;
+
+ action = arm11->bpwp_actions + arm11->bpwp_n;
+
+ /* Invariant: this bp/wp is disabled.
+ * It also happens that the core is halted here, but for
+ * DPM-based cores we don't actually care about that.
+ */
+
+ action[0].write = action[1].write = true;
+
+ action[0].value = addr;
+ action[1].value = control;
+
+ switch (index_t) {
+ case 0 ... 15:
+ action[0].address = ARM11_SC7_BVR0 + index_t;
+ action[1].address = ARM11_SC7_BCR0 + index_t;
+ break;
+ case 16 ... 32:
+ index_t -= 16;
+ action[0].address = ARM11_SC7_WVR0 + index_t;
+ action[1].address = ARM11_SC7_WCR0 + index_t;
+ break;
+ default:
+ return ERROR_FAIL;
+ }
+
+ arm11->bpwp_n += 2;
return ERROR_OK;
}
+static int arm11_bpwp_disable(struct arm_dpm *dpm, unsigned index_t)
+{
+ struct arm11_common *arm11 = dpm_to_arm11(dpm);
+ struct arm11_sc7_action *action;
+
+ action = arm11->bpwp_actions + arm11->bpwp_n;
+
+ action[0].write = true;
+ action[0].value = 0;
+
+ switch (index_t) {
+ case 0 ... 15:
+ action[0].address = ARM11_SC7_BCR0 + index_t;
+ break;
+ case 16 ... 32:
+ index_t -= 16;
+ action[0].address = ARM11_SC7_WCR0 + index_t;
+ break;
+ default:
+ return ERROR_FAIL;
+ }
+
+ arm11->bpwp_n += 1;
+
+ return ERROR_OK;
+}
+
+/** Flush any pending breakpoint and watchpoint updates. */
+int arm11_bpwp_flush(struct arm11_common *arm11)
+{
+ int retval;
+
+ if (!arm11->bpwp_n)
+ return ERROR_OK;
+
+ retval = arm11_sc7_run(arm11, arm11->bpwp_actions, arm11->bpwp_n);
+ arm11->bpwp_n = 0;
+
+ return retval;
+}
+
+/** Set up high-level debug module utilities */
+int arm11_dpm_init(struct arm11_common *arm11, uint32_t didr)
+{
+ struct arm_dpm *dpm = &arm11->dpm;
+ int retval;
+
+ dpm->arm = &arm11->arm;
+
+ dpm->didr = didr;
+
+ dpm->prepare = arm11_dpm_prepare;
+ dpm->finish = arm11_dpm_finish;
+
+ dpm->instr_write_data_dcc = arm11_dpm_instr_write_data_dcc;
+ dpm->instr_write_data_r0 = arm11_dpm_instr_write_data_r0;
+
+ dpm->instr_read_data_dcc = arm11_dpm_instr_read_data_dcc;
+ dpm->instr_read_data_r0 = arm11_dpm_instr_read_data_r0;
+ dpm->bpwp_enable = arm11_bpwp_enable;
+ dpm->bpwp_disable = arm11_bpwp_disable;
+
+ retval = arm_dpm_setup(dpm);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* alloc enough to enable all breakpoints and watchpoints at once */
+ arm11->bpwp_actions = calloc(2 * (dpm->nbp + dpm->nwp),
+ sizeof *arm11->bpwp_actions);
+ if (!arm11->bpwp_actions)
+ return ERROR_FAIL;
+
+ retval = arm_dpm_initialize(dpm);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return arm11_bpwp_flush(arm11);
+}
Code Review / openocd.git / blobdiff