* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
***************************************************************************/
/**
#include "arm_adi_v5.h"
#include <helper/time_support.h>
-
/* JTAG instructions/registers for JTAG-DP and SWJ-DP */
#define JTAG_DP_ABORT 0x8
#define JTAG_DP_DPACC 0xA
#define JTAG_ACK_OK_FAULT 0x2
#define JTAG_ACK_WAIT 0x1
+static int jtag_ap_q_abort(struct adiv5_dap *dap, uint8_t *ack);
+
/***************************************************************************
*
* DPACC and APACC scanchain access through JTAG-DP (or SWJ-DP)
* @param ack points to where the three bit JTAG_ACK_* code will be stored
*/
-/* FIXME don't export ... this is a temporary workaround for the
- * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific.
- */
-int adi_jtag_dp_scan(struct adiv5_dap *dap,
+static int adi_jtag_dp_scan(struct adiv5_dap *dap,
uint8_t instr, uint8_t reg_addr, uint8_t RnW,
uint8_t *outvalue, uint8_t *invalue, uint8_t *ack)
{
struct arm_jtag *jtag_info = dap->jtag_info;
struct scan_field fields[2];
uint8_t out_addr_buf;
+ int retval;
- arm_jtag_set_instr(jtag_info, instr, NULL, TAP_IDLE);
+ retval = arm_jtag_set_instr(jtag_info, instr, NULL, TAP_IDLE);
+ if (retval != ERROR_OK)
+ return retval;
/* Scan out a read or write operation using some DP or AP register.
* For APACC access with any sticky error flag set, this is discarded.
jtag_add_runtest(dap->memaccess_tck,
TAP_IDLE);
- return jtag_get_error();
+ return ERROR_OK;
}
/**
/* too expensive to call keep_alive() here */
-#if 0
- /* Danger!!!! BROKEN!!!! */
- adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
- DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- /* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here????
- R956 introduced the check on return value here and now Michael Schwingen reports
- that this code no longer works....
-
- https://lists.berlios.de/pipermail/openocd-development/2008-September/003107.html
- */
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
- LOG_ERROR("BUG: Why does this fail the first time????");
- }
- /* Why??? second time it works??? */
-#endif
+ /* Here be dragons!
+ *
+ * It is easy to be in a JTAG clock range where the target
+ * is not operating in a stable fashion. This happens
+ * for a few reasons:
+ *
+ * - the user may construct a simple test case to try to see
+ * if a higher JTAG clock works to eke out more performance.
+ * This simple case may pass, but more complex situations can
+ * fail.
+ *
+ * - The mostly works JTAG clock rate and the complete failure
+ * JTAG clock rate may be as much as 2-4x apart. This seems
+ * to be especially true on RC oscillator driven parts.
+ *
+ * So: even if calling adi_jtag_scan_inout_check_u32() multiple
+ * times here seems to "make things better here", it is just
+ * hiding problems with too high a JTAG clock.
+ *
+ * Note that even if some parts have RCLK/RTCK, that doesn't
+ * mean that RCLK/RTCK is the *correct* rate to run the JTAG
+ * interface at, i.e. RCLK/RTCK rates can be "too high", especially
+ * before the RC oscillator phase is not yet complete.
+ */
/* Post CTRL/STAT read; discard any previous posted read value
* but collect its ACK status.
*/
- adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
+ retval = adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ if (retval != ERROR_OK)
+ return retval;
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
dap->ack = dap->ack & 0x7;
/* common code path avoids calling timeval_ms() */
- if (dap->ack != JTAG_ACK_OK_FAULT)
- {
+ if (dap->ack != JTAG_ACK_OK_FAULT) {
long long then = timeval_ms();
- while (dap->ack != JTAG_ACK_OK_FAULT)
- {
- if (dap->ack == JTAG_ACK_WAIT)
- {
- if ((timeval_ms()-then) > 1000)
- {
- /* NOTE: this would be a good spot
- * to use JTAG_DP_ABORT.
- */
+ while (dap->ack != JTAG_ACK_OK_FAULT) {
+ if (dap->ack == JTAG_ACK_WAIT) {
+ if ((timeval_ms()-then) > 1000) {
LOG_WARNING("Timeout (1000ms) waiting "
"for ACK=OK/FAULT "
- "in JTAG-DP transaction");
+ "in JTAG-DP transaction - aborting");
+
+ uint8_t ack;
+ int abort_ret = jtag_ap_q_abort(dap, &ack);
+
+ if (abort_ret != 0)
+ LOG_WARNING("Abort failed : return=%d ack=%d", abort_ret, ack);
+
return ERROR_JTAG_DEVICE_ERROR;
}
- }
- else
- {
+ } else {
LOG_WARNING("Invalid ACK %#x "
"in JTAG-DP transaction",
dap->ack);
return ERROR_JTAG_DEVICE_ERROR;
}
- adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
+ retval = adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = dap_run(dap)) != ERROR_OK)
+ if (retval != ERROR_OK)
+ return retval;
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
dap->ack = dap->ack & 0x7;
}
/* REVISIT also STICKYCMP, for pushed comparisons (nyet used) */
/* Check for STICKYERR and STICKYORUN */
- if (ctrlstat & (SSTICKYORUN | SSTICKYERR))
- {
+ if (ctrlstat & (SSTICKYORUN | SSTICKYERR)) {
LOG_DEBUG("jtag-dp: CTRL/STAT error, 0x%" PRIx32, ctrlstat);
/* Check power to debug regions */
- if ((ctrlstat & 0xf0000000) != 0xf0000000)
- ahbap_debugport_init(dap);
- else
- {
+ if ((ctrlstat & 0xf0000000) != 0xf0000000) {
+ retval = ahbap_debugport_init(dap);
+ if (retval != ERROR_OK)
+ return retval;
+ } else {
uint32_t mem_ap_csw, mem_ap_tar;
/* Maybe print information about last intended
LOG_ERROR("JTAG-DP STICKY ERROR");
/* Clear Sticky Error Bits */
- adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
+ retval = adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_WRITE,
dap->dp_ctrl_stat | SSTICKYORUN
| SSTICKYERR, NULL);
- adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
+ if (retval != ERROR_OK)
+ return retval;
+ retval = adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = dap_run(dap)) != ERROR_OK)
+ if (retval != ERROR_OK)
+ return retval;
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat);
if (retval != ERROR_OK)
return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%"
PRIx32, mem_ap_csw, mem_ap_tar);
}
- if ((retval = dap_run(dap)) != ERROR_OK)
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK)
return retval;
return ERROR_JTAG_DEVICE_ERROR;
}
fields[0].num_bits = 32;
fields[0].out_value = NULL;
- fields[0].in_value = (void *) data;
+ fields[0].in_value = (uint8_t *) data;
jtag_add_dr_scan(jtag_info->tap, 1, fields, TAP_IDLE);
- retval = jtag_get_error();
- if (retval != ERROR_OK)
- return retval;
jtag_add_callback(arm_le_to_h_u32,
(jtag_callback_data_t) data);
- return retval;
+ return ERROR_OK;
}
static int jtag_dp_q_read(struct adiv5_dap *dap, unsigned reg,
return ERROR_OK;
dap->ap_bank_value = select_ap_bank;
- select_ap_bank |= dap->apsel;
+ select_ap_bank |= dap->ap_current;
return jtag_dp_q_write(dap, DP_SELECT, select_ap_bank);
}
return adi_jtag_ap_write_check(dap, reg, out_value_buf);
}
+static int jtag_ap_q_read_block(struct adiv5_dap *dap, unsigned reg,
+ uint32_t blocksize, uint8_t *buffer)
+{
+ uint32_t readcount;
+ int retval = ERROR_OK;
+
+ /* Scan out first read */
+ retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg,
+ DPAP_READ, 0, NULL, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ for (readcount = 0; readcount < blocksize - 1; readcount++) {
+ /* Scan out next read; scan in posted value for the
+ * previous one. Assumes read is acked "OK/FAULT",
+ * and CTRL_STAT says that meant "OK".
+ */
+ retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg,
+ DPAP_READ, 0, buffer + 4 * readcount,
+ &dap->ack);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ /* Scan in last posted value; RDBUFF has no other effect,
+ * assuming ack is OK/FAULT and CTRL_STAT says "OK".
+ */
+ retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC, DP_RDBUFF,
+ DPAP_READ, 0, buffer + 4 * readcount,
+ &dap->ack);
+
+ return retval;
+}
+
static int jtag_ap_q_abort(struct adiv5_dap *dap, uint8_t *ack)
{
/* for JTAG, this is the only valid ABORT register operation */
* part of DAP setup
*/
const struct dap_ops jtag_dp_ops = {
- .queue_idcode_read = jtag_idcode_q_read,
- .queue_dp_read = jtag_dp_q_read,
- .queue_dp_write = jtag_dp_q_write,
- .queue_ap_read = jtag_ap_q_read,
- .queue_ap_write = jtag_ap_q_write,
- .queue_ap_abort = jtag_ap_q_abort,
- .run = jtag_dp_run,
+ .queue_idcode_read = jtag_idcode_q_read,
+ .queue_dp_read = jtag_dp_q_read,
+ .queue_dp_write = jtag_dp_q_write,
+ .queue_ap_read = jtag_ap_q_read,
+ .queue_ap_write = jtag_ap_q_write,
+ .queue_ap_read_block = jtag_ap_q_read_block,
+ .queue_ap_abort = jtag_ap_q_abort,
+ .run = jtag_dp_run,
};
Code Review / openocd.git / blobdiff