* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
-* Copyright (C) 2007,2008 Øyvind Harboe *
+* Copyright (C) 2007,2008 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* This program is free software; you can redistribute it and/or modify *
*/
typedef enum tap_state
{
-#if BUILD_ECOSBOARD
+#if BUILD_ZY1000
/* These are the old numbers. Leave as-is for now... */
TAP_RESET = 0, TAP_IDLE = 8,
TAP_DRSELECT = 1, TAP_DRCAPTURE = 2, TAP_DRSHIFT = 3, TAP_DREXIT1 = 4,
/// The number of bits this field specifies (up to 32)
int num_bits;
/// A pointer to value to be scanned into the device
- u8* out_value;
+ uint8_t* out_value;
/// A pointer to a 32-bit memory location for data scanned out
- u8* in_value;
+ uint8_t* in_value;
/// The value used to check the data scanned out.
- u8* check_value;
+ uint8_t* check_value;
/// The mask to go with check_value
- u8* check_mask;
+ uint8_t* check_mask;
/// in_value has been allocated for the queue
int allocated;
/// Indicates we modified the in_value.
int modified;
/// temporary storage for performing value checks synchronously
- u8 intmp[4];
+ uint8_t intmp[4];
} scan_field_t;
typedef struct jtag_tap_event_action_s jtag_tap_event_action_t;
/* this is really: typedef jtag_tap_t */
/* But - the typedef is done in "types.h" */
-/* due to "forward decloration reasons" */
+/* due to "forward declaration reasons" */
struct jtag_tap_s
{
const char* chip;
const char* tapname;
const char* dotted_name;
int abs_chain_position;
- /// Is this TAP enabled?
- int enabled;
+ /// Is this TAP disabled after JTAG reset?
+ bool disabled_after_reset;
+ /// Is this TAP currently enabled?
+ bool enabled;
int ir_length; /**< size of instruction register */
- u32 ir_capture_value;
- u8* expected; /**< Capture-IR expected value */
- u32 ir_capture_mask;
- u8* expected_mask; /**< Capture-IR expected mask */
- u32 idcode;
+ uint32_t ir_capture_value;
+ uint8_t* expected; /**< Capture-IR expected value */
+ uint32_t ir_capture_mask;
+ uint8_t* expected_mask; /**< Capture-IR expected mask */
+ uint32_t idcode;
+ bool hasidcode; /* not all devices have idcode, we'll discover this during chain examination */
/**< device identification code */
/// Array of expected identification codes */
- u32* expected_ids;
+ uint32_t* expected_ids;
/// Number of expected identification codes
- u8 expected_ids_cnt;
+ uint8_t expected_ids_cnt;
/// current instruction
- u8* cur_instr;
+ uint8_t* cur_instr;
/// Bypass register selected
int bypass;
jtag_tap_t* next_tap;
};
-extern jtag_tap_t* jtag_AllTaps(void);
-extern jtag_tap_t* jtag_TapByPosition(int n);
-extern jtag_tap_t* jtag_TapByString(const char* dotted_name);
-extern jtag_tap_t* jtag_TapByJimObj(Jim_Interp* interp, Jim_Obj* obj);
-extern jtag_tap_t* jtag_TapByAbsPosition(int abs_position);
-extern int jtag_NumEnabledTaps(void);
-extern int jtag_NumTotalTaps(void);
-
-static __inline__ jtag_tap_t* jtag_NextEnabledTap(jtag_tap_t* p)
-{
- if (p == NULL)
- {
- /* start at the head of list */
- p = jtag_AllTaps();
- }
- else
- {
- /* start *after* this one */
- p = p->next_tap;
- }
- while (p)
- {
- if (p->enabled)
- {
- break;
- }
- else
- {
- p = p->next_tap;
- }
- }
-
- return p;
-}
-
-
-enum reset_line_mode {
- LINE_OPEN_DRAIN = 0x0,
- LINE_PUSH_PULL = 0x1,
-};
-/*
- * There are three cases when JTAG_TRST_ASSERTED callback is invoked. The
- * event is invoked *after* TRST is asserted(or queued rather). It is illegal
- * to communicate with the JTAG interface during the callback(as there is
- * currently a queue being built).
- *
- * - TMS reset
- * - SRST pulls TRST
- * - TRST asserted
- *
- **/
-enum jtag_event {
- JTAG_TRST_ASSERTED
-};
+void jtag_tap_init(jtag_tap_t *tap);
+void jtag_tap_free(jtag_tap_t *tap);
+
+extern jtag_tap_t* jtag_all_taps(void);
+extern const char *jtag_tap_name(const jtag_tap_t *tap);
+extern jtag_tap_t* jtag_tap_by_string(const char* dotted_name);
+extern jtag_tap_t* jtag_tap_by_jim_obj(Jim_Interp* interp, Jim_Obj* obj);
+extern jtag_tap_t* jtag_tap_next_enabled(jtag_tap_t* p);
+extern unsigned jtag_tap_count_enabled(void);
+extern unsigned jtag_tap_count(void);
-extern char* jtag_event_strings[];
-enum jtag_tap_event {
+/*
+ * - TRST_ASSERTED triggers two sets of callbacks, after operations to
+ * reset the scan chain -- via TMS+TCK signaling, or deasserting the
+ * nTRST signal -- are queued:
+ *
+ * + Callbacks in C code fire first, patching internal state
+ * + Then post-reset event scripts fire ... activating JTAG circuits
+ * via TCK cycles, exiting SWD mode via TMS sequences, etc
+ *
+ * During those callbacks, scan chain contents have not been validated.
+ * JTAG operations that address a specific TAP (primarily DR/IR scans)
+ * must *not* be queued.
+ *
+ * - TAP_EVENT_SETUP is reported after TRST_ASSERTED, and after the scan
+ * chain has been validated. JTAG operations including scans that
+ * target specific TAPs may be performed.
+ *
+ * - TAP_EVENT_ENABLE and TAP_EVENT_DISABLE implement TAP activation and
+ * deactivation outside the core using scripted code that understands
+ * the specific JTAG router type. They might be triggered indirectly
+ * from EVENT_SETUP operations.
+ */
+enum jtag_event {
+ JTAG_TRST_ASSERTED,
+ JTAG_TAP_EVENT_SETUP,
JTAG_TAP_EVENT_ENABLE,
- JTAG_TAP_EVENT_DISABLE
+ JTAG_TAP_EVENT_DISABLE,
};
-extern const Jim_Nvp nvp_jtag_tap_event[];
-
struct jtag_tap_event_action_s
{
- enum jtag_tap_event event;
+ enum jtag_event event;
Jim_Obj* body;
jtag_tap_event_action_t* next;
};
-extern int jtag_trst;
-extern int jtag_srst;
+/**
+ * Defines the function signature requide for JTAG event callback
+ * functions, which are added with jtag_register_event_callback()
+ * and removed jtag_unregister_event_callback().
+ * @param event The event to handle.
+ * @param prive A pointer to data that was passed to
+ * jtag_register_event_callback().
+ * @returns Must return ERROR_OK on success, or an error code on failure.
+ *
+ * @todo Change to return void or define a use for its return code.
+ */
+typedef int (*jtag_event_handler_t)(enum jtag_event event, void* priv);
-typedef struct jtag_event_callback_s
-{
- int (*callback)(enum jtag_event event, void* priv);
- void* priv;
- struct jtag_event_callback_s* next;
-} jtag_event_callback_t;
+extern int jtag_register_event_callback(jtag_event_handler_t f, void *x);
+extern int jtag_unregister_event_callback(jtag_event_handler_t f, void *x);
+
+extern int jtag_call_event_callbacks(enum jtag_event event);
-extern jtag_event_callback_t* jtag_event_callbacks;
-extern int jtag_speed;
-extern int jtag_speed_post_reset;
+/// @returns The current JTAG speed setting.
+int jtag_get_speed(void);
+/**
+ * Given a @a speed setting, use the interface @c speed_div callback to
+ * adjust the setting.
+ * @param speed The speed setting to convert back to readable KHz.
+ * @returns ERROR_OK if the interface has not been initialized or on success;
+ * otherwise, the error code produced by the @c speed_div callback.
+ */
+int jtag_get_speed_readable(int *speed);
+/**
+ * Set the JTAG speed. This routine will call the underlying
+ * interface @c speed callback, if the interface has been initialized.
+ * @param speed The new speed setting.
+ * @returns ERROR_OK during configuration or on success, or an error
+ * code returned from the interface @c speed callback.
+ */
+int jtag_config_speed(int speed);
+
+
+/// Attempt to configure the interface for the specified KHz.
+int jtag_config_khz(unsigned khz);
+/**
+ * Attempt to enable RTCK/RCLK. If that fails, fallback to the
+ * specified frequency.
+ */
+int jtag_config_rclk(unsigned fallback_speed_khz);
+/// Retreives the clock speed of the JTAG interface in KHz.
+unsigned jtag_get_speed_khz(void);
+
enum reset_types {
RESET_NONE = 0x0,
RESET_TRST_PULLS_SRST = 0x8,
RESET_TRST_OPEN_DRAIN = 0x10,
RESET_SRST_PUSH_PULL = 0x20,
+ RESET_SRST_GATES_JTAG = 0x40,
};
-extern enum reset_types jtag_reset_config;
+enum reset_types jtag_get_reset_config(void);
+void jtag_set_reset_config(enum reset_types type);
+
+void jtag_set_nsrst_delay(unsigned delay);
+unsigned jtag_get_nsrst_delay(void);
+
+void jtag_set_ntrst_delay(unsigned delay);
+unsigned jtag_get_ntrst_delay(void);
+
+void jtag_set_nsrst_assert_width(unsigned delay);
+unsigned jtag_get_nsrst_assert_width(void);
+
+void jtag_set_ntrst_assert_width(unsigned delay);
+unsigned jtag_get_ntrst_assert_width(void);
+
+/// @returns The current state of TRST.
+int jtag_get_trst(void);
+/// @returns The current state of SRST.
+int jtag_get_srst(void);
+
+/// Enable or disable data scan verification checking.
+void jtag_set_verify(bool enable);
+/// @returns True if data scan verification will be performed.
+bool jtag_will_verify(void);
+
+/// Enable or disable verification of IR scan checking.
+void jtag_set_verify_capture_ir(bool enable);
+/// @returns True if IR scan verification will be performed.
+bool jtag_will_verify_capture_ir(void);
/**
* Initialize interface upon startup. Return a successful no-op upon
extern int jtag_init(struct command_context_s* cmd_ctx);
/// reset, then initialize JTAG chain
-extern int jtag_init_reset(struct command_context_s* cmd_ctx);
-extern int jtag_register_commands(struct command_context_s* cmd_ctx);
+extern int jtag_init_reset(struct command_context_s* cmd_ctx);
+extern int jtag_register_commands(struct command_context_s* cmd_ctx);
+extern int jtag_init_inner(struct command_context_s *cmd_ctx);
/**
* @file
* end state and a subsequent jtag_add_pathmove() must be issued.
*/
+/**
+ * Generate an IR SCAN with a list of scan fields with one entry for
+ * each enabled TAP.
+ *
+ * If the input field list contains an instruction value for a TAP then
+ * that is used otherwise the TAP is set to bypass.
+ *
+ * TAPs for which no fields are passed are marked as bypassed for
+ * subsequent DR SCANs.
+ *
+ */
extern void jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
/**
* The same as jtag_add_ir_scan except no verification is performed out
* the output values.
*/
extern void jtag_add_ir_scan_noverify(int num_fields, const scan_field_t *fields, tap_state_t state);
+/**
+ * Duplicate the scan fields passed into the function into an IR SCAN
+ * command. This function assumes that the caller handles extra fields
+ * for bypassed TAPs.
+ */
+extern void jtag_add_plain_ir_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
/**
*/
extern void jtag_alloc_in_value32(scan_field_t *field);
+/**
+ * Generate a DR SCAN using the fields passed to the function.
+ * For connected TAPs, the function checks in_fields and uses fields
+ * specified there. For bypassed TAPs, the function generates a dummy
+ * 1-bit field. The bypass status of TAPs is set by jtag_add_ir_scan().
+ */
extern void jtag_add_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
/// A version of jtag_add_dr_scan() that uses the check_value/mask fields
extern void jtag_add_dr_scan_check(int num_fields, scan_field_t* fields, tap_state_t endstate);
-extern void jtag_add_plain_ir_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
+/**
+ * Duplicate the scan fields passed into the function into a DR SCAN
+ * command. Unlike jtag_add_dr_scan(), this function assumes that the
+ * caller handles extra fields for bypassed TAPs.
+ */
extern void jtag_add_plain_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
+/**
+ * Defines the type of data passed to the jtag_callback_t interface.
+ * The underlying type must allow storing an @c int or pointer type.
+ */
+typedef intptr_t jtag_callback_data_t;
/**
* Defines a simple JTAG callback that can allow conversions on data
* For conversion types or checks that can fail, use the more complete
* variant: jtag_callback_t.
*/
-typedef void (*jtag_callback1_t)(u8 *in);
+typedef void (*jtag_callback1_t)(jtag_callback_data_t data0);
/// A simpler version of jtag_add_callback4().
-extern void jtag_add_callback(jtag_callback1_t, u8 *in);
+extern void jtag_add_callback(jtag_callback1_t, jtag_callback_data_t data0);
-/**
- * Defines the type of data passed to the jtag_callback_t interface.
- * The underlying type must allow storing an @c int or pointer type.
- */
-typedef intptr_t jtag_callback_data_t;
/**
* Defines the interface of the JTAG callback mechanism.
* @param data3 An integer big enough to use as an @c int or a pointer.
* @returns an error code
*/
-typedef int (*jtag_callback_t)(u8 *in, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3);
+typedef int (*jtag_callback_t)(jtag_callback_data_t data0, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3);
/**
* arguments.
*
* @param f The callback function to add.
- * @param in Typically used to point to the data to operate on.
+ * @param data0 Typically used to point to the data to operate on.
* Frequently this will be the data clocked in during a shift operation.
* @param data1 An integer big enough to use as an @c int or a pointer.
* @param data2 An integer big enough to use as an @c int or a pointer.
* @param data3 An integer big enough to use as an @c int or a pointer.
*
*/
-extern void jtag_add_callback4(jtag_callback_t f, u8 *in,
+extern void jtag_add_callback4(jtag_callback_t f, jtag_callback_data_t data0,
jtag_callback_data_t data1, jtag_callback_data_t data2,
jtag_callback_data_t data3);
* can only implement a few transitions and therefore
* a partial implementation of pathmove would have little practical
* application.
+ *
+ * If an error occurs, jtag_error will contain one of these error codes:
+ * - ERROR_JTAG_NOT_STABLE_STATE -- The final state was not stable.
+ * - ERROR_JTAG_STATE_INVALID -- The path passed through TAP_RESET.
+ * - ERROR_JTAG_TRANSITION_INVALID -- The path includes invalid
+ * state transitions.
*/
extern void jtag_add_pathmove(int num_states, const tap_state_t* path);
+/**
+ * jtag_add_statemove() moves from the current state to @a goal_state.
+ *
+ * @param goal_state The final TAP state.
+ * @return ERROR_OK on success, or an error code on failure.
+ *
+ * Moves from the current state to the goal \a state.
+ *
+ * This needs to be handled according to the xsvf spec, see the XSTATE
+ * command description. From the XSVF spec, pertaining to XSTATE:
+ *
+ * For special states known as stable states (Test-Logic-Reset,
+ * Run-Test/Idle, Pause-DR, Pause- IR), an XSVF interpreter follows
+ * predefined TAP state paths when the starting state is a stable state
+ * and when the XSTATE specifies a new stable state. See the STATE
+ * command in the [Ref 5] for the TAP state paths between stable
+ * states.
+ *
+ * For non-stable states, XSTATE should specify a state that is only one
+ * TAP state transition distance from the current TAP state to avoid
+ * undefined TAP state paths. A sequence of multiple XSTATE commands can
+ * be issued to transition the TAP through a specific state path.
+ *
+ * @note Unless @c tms_bits holds a path that agrees with [Ref 5] in the
+ * above spec, then this code is not fully conformant to the xsvf spec.
+ * This puts a burden on tap_get_tms_path() function from the xsvf spec.
+ * If in doubt, you should confirm that that burden is being met.
+ *
+ * Otherwise, @a goal_state must be immediately reachable in one clock
+ * cycle, and does not need to be a stable state.
+ */
+extern int jtag_add_statemove(tap_state_t goal_state);
+
/**
* Goes to TAP_IDLE (if we're not already there), cycle
* precisely num_cycles in the TAP_IDLE state, after which move
/**
- * Function jtag_add_stable_clocks
+ * Function jtag_set_end_state
*
* Set a global variable to \a state if \a state != TAP_INVALID.
*
* Return the value of the global variable.
*
**/
-extern tap_state_t jtag_add_end_state(tap_state_t state);
-extern void jtag_add_sleep(u32 us);
+extern tap_state_t jtag_set_end_state(tap_state_t state);
+/**
+ * Function jtag_get_end_state
+ *
+ * Return the value of the global variable for end state
+ *
+ **/
+extern tap_state_t jtag_get_end_state(void);
+extern void jtag_add_sleep(uint32_t us);
/**
* matter if the operation was executed *before* jtag_execute_queue(),
* jtag_execute_queue() will still return an error code.
*
- * All jtag_add_xxx() calls that have in_handler!=NULL will have been
+ * All jtag_add_xxx() calls that have in_handler != NULL will have been
* executed when this fn returns, but if what has been queued only
* clocks data out, without reading anything back, then JTAG could
* be running *after* jtag_execute_queue() returns. The API does
*/
extern int jtag_execute_queue(void);
-/* same as jtag_execute_queue() but does not clear the error flag */
+/// same as jtag_execute_queue() but does not clear the error flag
extern void jtag_execute_queue_noclear(void);
-/**
- * The jtag_error variable is set when an error occurs while executing
- * the queue.
- *
- * This flag can also be set from application code, if an error happens
- * during processing that should be reported during jtag_execute_queue().
- *
- * It is cleared by jtag_execute_queue().
- */
-extern int jtag_error;
-
-static __inline__ void jtag_set_error(int error)
-{
- if ((error==ERROR_OK)||(jtag_error!=ERROR_OK))
- {
- /* keep first error */
- return;
- }
- jtag_error=error;
-}
+/// @returns the number of times the scan queue has been flushed
+int jtag_get_flush_queue_count(void);
+/// Report Tcl event to all TAPs
+void jtag_notify_event(enum jtag_event);
-/* can be implemented by hw+sw */
+/* can be implemented by hw + sw */
extern int jtag_power_dropout(int* dropout);
extern int jtag_srst_asserted(int* srst_asserted);
* @param mask Pointer to scan mask; may be NULL.
* @returns Nothing, but calls jtag_set_error() on any error.
*/
-extern void jtag_check_value_mask(scan_field_t *field, u8 *value, u8 *mask);
+extern void jtag_check_value_mask(scan_field_t *field, uint8_t *value, uint8_t *mask);
-extern void jtag_sleep(u32 us);
-extern int jtag_call_event_callbacks(enum jtag_event event);
-extern int jtag_register_event_callback(int (* callback)(enum jtag_event event, void* priv), void* priv);
-
-extern int jtag_verify_capture_ir;
-
-void jtag_tap_handle_event(jtag_tap_t* tap, enum jtag_tap_event e);
+extern void jtag_sleep(uint32_t us);
/*
* The JTAG subsystem defines a number of error codes,
#define ERROR_JTAG_QUEUE_FAILED (-104)
#define ERROR_JTAG_NOT_STABLE_STATE (-105)
#define ERROR_JTAG_DEVICE_ERROR (-107)
+#define ERROR_JTAG_STATE_INVALID (-108)
+#define ERROR_JTAG_TRANSITION_INVALID (-109)
/**
* jtag_add_dr_out() is a version of jtag_add_dr_scan() which
* clocking data back in. Patches gladly accepted!
*/
extern void jtag_add_dr_out(jtag_tap_t* tap,
- int num_fields, const int* num_bits, const u32* value,
+ int num_fields, const int* num_bits, const uint32_t* value,
tap_state_t end_state);
/**
- * jtag_add_statemove() moves from the current state to @a goal_state.
- *
- * This function was originally designed to handle the XSTATE command
- * from the XSVF specification.
- *
- * @param goal_state The final TAP state.
- * @return ERROR_OK on success, or an error code on failure.
+ * Set the current JTAG core execution error, unless one was set
+ * by a previous call previously. Driver or application code must
+ * use jtag_error_clear to reset jtag_error once this routine has been
+ * called with a non-zero error code.
*/
-extern int jtag_add_statemove(tap_state_t goal_state);
+void jtag_set_error(int error);
+/// @returns The current value of jtag_error
+int jtag_get_error(void);
+/**
+ * Resets jtag_error to ERROR_OK, returning its previous value.
+ * @returns The previous value of @c jtag_error.
+ */
+int jtag_error_clear(void);
#endif /* JTAG_H */
Code Review / openocd.git / blobdiff