drivers/bitbang: remove unused extern declaration of jtag_interface
[openocd.git] / src / jtag / drivers / bitbang.c
index 4548cb531ed33683d8155f52c99d53ab77c523a7..da4fb334819755405b83c39f66d596a8c4821c0f 100644 (file)
  *   GNU General Public License for more details.                          *
  *                                                                         *
  *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
+
+/* 2014-12: Addition of the SWD protocol support is based on the initial work
+ * by Paul Fertser and modifications by Jean-Christian de Rivaz. */
+
 #ifdef HAVE_CONFIG_H
 #include "config.h"
 #endif
@@ -36,8 +38,9 @@
  * this function checks the current stable state to decide on the value of TMS
  * to use.
  */
-static void bitbang_stableclocks(int num_cycles);
+static int bitbang_stableclocks(int num_cycles);
 
+static void bitbang_swd_write_reg(uint8_t cmd, uint32_t value, uint32_t ap_delay_clk);
 
 struct bitbang_interface *bitbang_interface;
 
@@ -61,159 +64,163 @@ struct bitbang_interface *bitbang_interface;
  */
 #define CLOCK_IDLE() 0
 
-
 /* The bitbang driver leaves the TCK 0 when in idle */
 static void bitbang_end_state(tap_state_t state)
 {
-       if (tap_is_state_stable(state))
-               tap_set_end_state(state);
-       else
-       {
-               LOG_ERROR("BUG: %i is not a valid end state", state);
-               exit(-1);
-       }
+       assert(tap_is_state_stable(state));
+       tap_set_end_state(state);
 }
 
-static void bitbang_state_move(int skip)
+static int bitbang_state_move(int skip)
 {
        int i = 0, tms = 0;
        uint8_t tms_scan = tap_get_tms_path(tap_get_state(), tap_get_end_state());
        int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
 
-       for (i = skip; i < tms_count; i++)
-       {
+       for (i = skip; i < tms_count; i++) {
                tms = (tms_scan >> i) & 1;
-               bitbang_interface->write(0, tms, 0);
-               bitbang_interface->write(1, tms, 0);
+               if (bitbang_interface->write(0, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
+               if (bitbang_interface->write(1, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
        }
-       bitbang_interface->write(CLOCK_IDLE(), tms, 0);
+       if (bitbang_interface->write(CLOCK_IDLE(), tms, 0) != ERROR_OK)
+               return ERROR_FAIL;
 
        tap_set_state(tap_get_end_state());
+       return ERROR_OK;
 }
 
-
 /**
  * Clock a bunch of TMS (or SWDIO) transitions, to change the JTAG
  * (or SWD) state machine.
  */
 static int bitbang_execute_tms(struct jtag_command *cmd)
 {
-       unsigned        num_bits = cmd->cmd.tms->num_bits;
-       const uint8_t   *bits = cmd->cmd.tms->bits;
+       unsigned num_bits = cmd->cmd.tms->num_bits;
+       const uint8_t *bits = cmd->cmd.tms->bits;
 
        DEBUG_JTAG_IO("TMS: %d bits", num_bits);
 
        int tms = 0;
-       for (unsigned i = 0; i < num_bits; i++)
-       {
+       for (unsigned i = 0; i < num_bits; i++) {
                tms = ((bits[i/8] >> (i % 8)) & 1);
-               bitbang_interface->write(0, tms, 0);
-               bitbang_interface->write(1, tms, 0);
+               if (bitbang_interface->write(0, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
+               if (bitbang_interface->write(1, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
        }
-       bitbang_interface->write(CLOCK_IDLE(), tms, 0);
+       if (bitbang_interface->write(CLOCK_IDLE(), tms, 0) != ERROR_OK)
+               return ERROR_FAIL;
 
        return ERROR_OK;
 }
 
-
-static void bitbang_path_move(struct pathmove_command *cmd)
+static int bitbang_path_move(struct pathmove_command *cmd)
 {
        int num_states = cmd->num_states;
        int state_count;
        int tms = 0;
 
        state_count = 0;
-       while (num_states)
-       {
+       while (num_states) {
                if (tap_state_transition(tap_get_state(), false) == cmd->path[state_count])
-               {
                        tms = 0;
-               }
                else if (tap_state_transition(tap_get_state(), true) == cmd->path[state_count])
-               {
                        tms = 1;
-               }
-               else
-               {
-                       LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(tap_get_state()), tap_state_name(cmd->path[state_count]));
+               else {
+                       LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
+                               tap_state_name(tap_get_state()),
+                               tap_state_name(cmd->path[state_count]));
                        exit(-1);
                }
 
-               bitbang_interface->write(0, tms, 0);
-               bitbang_interface->write(1, tms, 0);
+               if (bitbang_interface->write(0, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
+               if (bitbang_interface->write(1, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
 
                tap_set_state(cmd->path[state_count]);
                state_count++;
                num_states--;
        }
 
-       bitbang_interface->write(CLOCK_IDLE(), tms, 0);
+       if (bitbang_interface->write(CLOCK_IDLE(), tms, 0) != ERROR_OK)
+               return ERROR_FAIL;
 
        tap_set_end_state(tap_get_state());
+       return ERROR_OK;
 }
 
-static void bitbang_runtest(int num_cycles)
+static int bitbang_runtest(int num_cycles)
 {
        int i;
 
        tap_state_t saved_end_state = tap_get_end_state();
 
        /* only do a state_move when we're not already in IDLE */
-       if (tap_get_state() != TAP_IDLE)
-       {
+       if (tap_get_state() != TAP_IDLE) {
                bitbang_end_state(TAP_IDLE);
-               bitbang_state_move(0);
+               if (bitbang_state_move(0) != ERROR_OK)
+                       return ERROR_FAIL;
        }
 
        /* execute num_cycles */
-       for (i = 0; i < num_cycles; i++)
-       {
-               bitbang_interface->write(0, 0, 0);
-               bitbang_interface->write(1, 0, 0);
+       for (i = 0; i < num_cycles; i++) {
+               if (bitbang_interface->write(0, 0, 0) != ERROR_OK)
+                       return ERROR_FAIL;
+               if (bitbang_interface->write(1, 0, 0) != ERROR_OK)
+                       return ERROR_FAIL;
        }
-       bitbang_interface->write(CLOCK_IDLE(), 0, 0);
+       if (bitbang_interface->write(CLOCK_IDLE(), 0, 0) != ERROR_OK)
+               return ERROR_FAIL;
 
        /* finish in end_state */
        bitbang_end_state(saved_end_state);
        if (tap_get_state() != tap_get_end_state())
-               bitbang_state_move(0);
-}
+               if (bitbang_state_move(0) != ERROR_OK)
+                       return ERROR_FAIL;
 
+       return ERROR_OK;
+}
 
-static void bitbang_stableclocks(int num_cycles)
+static int bitbang_stableclocks(int num_cycles)
 {
        int tms = (tap_get_state() == TAP_RESET ? 1 : 0);
        int i;
 
        /* send num_cycles clocks onto the cable */
-       for (i = 0; i < num_cycles; i++)
-       {
-               bitbang_interface->write(1, tms, 0);
-               bitbang_interface->write(0, tms, 0);
+       for (i = 0; i < num_cycles; i++) {
+               if (bitbang_interface->write(1, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
+               if (bitbang_interface->write(0, tms, 0) != ERROR_OK)
+                       return ERROR_FAIL;
        }
-}
-
 
+       return ERROR_OK;
+}
 
-static void bitbang_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size)
+static int bitbang_scan(bool ir_scan, enum scan_type type, uint8_t *buffer,
+               unsigned scan_size)
 {
        tap_state_t saved_end_state = tap_get_end_state();
-       int bit_cnt;
+       unsigned bit_cnt;
 
-       if (!((!ir_scan && (tap_get_state() == TAP_DRSHIFT)) || (ir_scan && (tap_get_state() == TAP_IRSHIFT))))
-       {
+       if (!((!ir_scan &&
+                       (tap_get_state() == TAP_DRSHIFT)) ||
+                       (ir_scan && (tap_get_state() == TAP_IRSHIFT)))) {
                if (ir_scan)
                        bitbang_end_state(TAP_IRSHIFT);
                else
                        bitbang_end_state(TAP_DRSHIFT);
 
-               bitbang_state_move(0);
+               if (bitbang_state_move(0) != ERROR_OK)
+                       return ERROR_FAIL;
                bitbang_end_state(saved_end_state);
        }
 
-       for (bit_cnt = 0; bit_cnt < scan_size; bit_cnt++)
-       {
-               int val = 0;
+       size_t buffered = 0;
+       for (bit_cnt = 0; bit_cnt < scan_size; bit_cnt++) {
                int tms = (bit_cnt == scan_size-1) ? 1 : 0;
                int tdi;
                int bytec = bit_cnt/8;
@@ -227,42 +234,70 @@ static void bitbang_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int
                if ((type != SCAN_IN) && (buffer[bytec] & bcval))
                        tdi = 1;
 
-               bitbang_interface->write(0, tms, tdi);
-
-               if (type != SCAN_OUT)
-                       val = bitbang_interface->read();
-
-               bitbang_interface->write(1, tms, tdi);
+               if (bitbang_interface->write(0, tms, tdi) != ERROR_OK)
+                       return ERROR_FAIL;
+
+               if (type != SCAN_OUT) {
+                       if (bitbang_interface->buf_size) {
+                               if (bitbang_interface->sample() != ERROR_OK)
+                                       return ERROR_FAIL;
+                               buffered++;
+                       } else {
+                               switch (bitbang_interface->read()) {
+                                       case BB_LOW:
+                                               buffer[bytec] &= ~bcval;
+                                               break;
+                                       case BB_HIGH:
+                                               buffer[bytec] |= bcval;
+                                               break;
+                                       default:
+                                               return ERROR_FAIL;
+                               }
+                       }
+               }
 
-               if (type != SCAN_OUT)
-               {
-                       if (val)
-                               buffer[bytec] |= bcval;
-                       else
-                               buffer[bytec] &= ~bcval;
+               if (bitbang_interface->write(1, tms, tdi) != ERROR_OK)
+                       return ERROR_FAIL;
+
+               if (type != SCAN_OUT && bitbang_interface->buf_size &&
+                               (buffered == bitbang_interface->buf_size ||
+                                bit_cnt == scan_size - 1)) {
+                       for (unsigned i = bit_cnt + 1 - buffered; i <= bit_cnt; i++) {
+                               switch (bitbang_interface->read_sample()) {
+                                       case BB_LOW:
+                                               buffer[i/8] &= ~(1 << (i % 8));
+                                               break;
+                                       case BB_HIGH:
+                                               buffer[i/8] |= 1 << (i % 8);
+                                               break;
+                                       default:
+                                               return ERROR_FAIL;
+                               }
+                       }
+                       buffered = 0;
                }
        }
 
-       if (tap_get_state() != tap_get_end_state())
-       {
+       if (tap_get_state() != tap_get_end_state()) {
                /* we *KNOW* the above loop transitioned out of
                 * the shift state, so we skip the first state
                 * and move directly to the end state.
                 */
-               bitbang_state_move(1);
+               if (bitbang_state_move(1) != ERROR_OK)
+                       return ERROR_FAIL;
        }
+       return ERROR_OK;
 }
 
 int bitbang_execute_queue(void)
 {
-       struct jtag_command *cmd = jtag_command_queue; /* currently processed command */
+       struct jtag_command *cmd = jtag_command_queue;  /* currently processed command */
        int scan_size;
        enum scan_type type;
        uint8_t *buffer;
        int retval;
 
-       if (!bitbang_interface)
-       {
+       if (!bitbang_interface) {
                LOG_ERROR("BUG: Bitbang interface called, but not yet initialized");
                exit(-1);
        }
@@ -272,60 +307,76 @@ int bitbang_execute_queue(void)
         */
        retval = ERROR_OK;
 
-       if (bitbang_interface->blink)
-               bitbang_interface->blink(1);
+       if (bitbang_interface->blink) {
+               if (bitbang_interface->blink(1) != ERROR_OK)
+                       return ERROR_FAIL;
+       }
 
-       while (cmd)
-       {
-               switch (cmd->type)
-               {
+       while (cmd) {
+               switch (cmd->type) {
                        case JTAG_RESET:
 #ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("reset trst: %i srst %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst);
+                               LOG_DEBUG("reset trst: %i srst %i",
+                               cmd->cmd.reset->trst,
+                               cmd->cmd.reset->srst);
 #endif
-                               if ((cmd->cmd.reset->trst == 1) || (cmd->cmd.reset->srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
-                               {
+                               if ((cmd->cmd.reset->trst == 1) ||
+                                               (cmd->cmd.reset->srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
                                        tap_set_state(TAP_RESET);
-                               }
-                               bitbang_interface->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
+                               if (bitbang_interface->reset(cmd->cmd.reset->trst,
+                                                       cmd->cmd.reset->srst) != ERROR_OK)
+                                       return ERROR_FAIL;
                                break;
                        case JTAG_RUNTEST:
 #ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("runtest %i cycles, end in %s", cmd->cmd.runtest->num_cycles, tap_state_name(cmd->cmd.runtest->end_state));
+                               LOG_DEBUG("runtest %i cycles, end in %s",
+                                               cmd->cmd.runtest->num_cycles,
+                                               tap_state_name(cmd->cmd.runtest->end_state));
 #endif
                                bitbang_end_state(cmd->cmd.runtest->end_state);
-                               bitbang_runtest(cmd->cmd.runtest->num_cycles);
+                               if (bitbang_runtest(cmd->cmd.runtest->num_cycles) != ERROR_OK)
+                                       return ERROR_FAIL;
                                break;
 
                        case JTAG_STABLECLOCKS:
                                /* this is only allowed while in a stable state.  A check for a stable
                                 * state was done in jtag_add_clocks()
                                 */
-                               bitbang_stableclocks(cmd->cmd.stableclocks->num_cycles);
+                               if (bitbang_stableclocks(cmd->cmd.stableclocks->num_cycles) != ERROR_OK)
+                                       return ERROR_FAIL;
                                break;
 
                        case JTAG_TLR_RESET:
 #ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("statemove end in %s", tap_state_name(cmd->cmd.statemove->end_state));
+                               LOG_DEBUG("statemove end in %s",
+                                               tap_state_name(cmd->cmd.statemove->end_state));
 #endif
                                bitbang_end_state(cmd->cmd.statemove->end_state);
-                               bitbang_state_move(0);
+                               if (bitbang_state_move(0) != ERROR_OK)
+                                       return ERROR_FAIL;
                                break;
                        case JTAG_PATHMOVE:
 #ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("pathmove: %i states, end in %s", cmd->cmd.pathmove->num_states,
-                                       tap_state_name(cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]));
+                               LOG_DEBUG("pathmove: %i states, end in %s",
+                                               cmd->cmd.pathmove->num_states,
+                                               tap_state_name(cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]));
 #endif
-                               bitbang_path_move(cmd->cmd.pathmove);
+                               if (bitbang_path_move(cmd->cmd.pathmove) != ERROR_OK)
+                                       return ERROR_FAIL;
                                break;
                        case JTAG_SCAN:
-#ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("%s scan end in %s",  (cmd->cmd.scan->ir_scan) ? "IR" : "DR", tap_state_name(cmd->cmd.scan->end_state));
-#endif
                                bitbang_end_state(cmd->cmd.scan->end_state);
                                scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
+#ifdef _DEBUG_JTAG_IO_
+                               LOG_DEBUG("%s scan %d bits; end in %s",
+                                               (cmd->cmd.scan->ir_scan) ? "IR" : "DR",
+                                               scan_size,
+                                       tap_state_name(cmd->cmd.scan->end_state));
+#endif
                                type = jtag_scan_type(cmd->cmd.scan);
-                               bitbang_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size);
+                               if (bitbang_scan(cmd->cmd.scan->ir_scan, type, buffer,
+                                                       scan_size) != ERROR_OK)
+                                       return ERROR_FAIL;
                                if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK)
                                        retval = ERROR_JTAG_QUEUE_FAILED;
                                if (buffer)
@@ -346,8 +397,213 @@ int bitbang_execute_queue(void)
                }
                cmd = cmd->next;
        }
-       if (bitbang_interface->blink)
-               bitbang_interface->blink(0);
+       if (bitbang_interface->blink) {
+               if (bitbang_interface->blink(0) != ERROR_OK)
+                       return ERROR_FAIL;
+       }
 
        return retval;
 }
+
+
+bool swd_mode;
+static int queued_retval;
+
+static int bitbang_swd_init(void)
+{
+       LOG_DEBUG("bitbang_swd_init");
+       swd_mode = true;
+       return ERROR_OK;
+}
+
+static void bitbang_exchange(bool rnw, uint8_t buf[], unsigned int offset, unsigned int bit_cnt)
+{
+       LOG_DEBUG("bitbang_exchange");
+       int tdi;
+
+       for (unsigned int i = offset; i < bit_cnt + offset; i++) {
+               int bytec = i/8;
+               int bcval = 1 << (i % 8);
+               tdi = !rnw && (buf[bytec] & bcval);
+
+               bitbang_interface->write(0, 0, tdi);
+
+               if (rnw && buf) {
+                       if (bitbang_interface->swdio_read())
+                               buf[bytec] |= bcval;
+                       else
+                               buf[bytec] &= ~bcval;
+               }
+
+               bitbang_interface->write(1, 0, tdi);
+       }
+}
+
+int bitbang_swd_switch_seq(enum swd_special_seq seq)
+{
+       LOG_DEBUG("bitbang_swd_switch_seq");
+
+       switch (seq) {
+       case LINE_RESET:
+               LOG_DEBUG("SWD line reset");
+               bitbang_exchange(false, (uint8_t *)swd_seq_line_reset, 0, swd_seq_line_reset_len);
+               break;
+       case JTAG_TO_SWD:
+               LOG_DEBUG("JTAG-to-SWD");
+               bitbang_exchange(false, (uint8_t *)swd_seq_jtag_to_swd, 0, swd_seq_jtag_to_swd_len);
+               break;
+       case SWD_TO_JTAG:
+               LOG_DEBUG("SWD-to-JTAG");
+               bitbang_exchange(false, (uint8_t *)swd_seq_swd_to_jtag, 0, swd_seq_swd_to_jtag_len);
+               break;
+       default:
+               LOG_ERROR("Sequence %d not supported", seq);
+               return ERROR_FAIL;
+       }
+
+       return ERROR_OK;
+}
+
+void bitbang_switch_to_swd(void)
+{
+       LOG_DEBUG("bitbang_switch_to_swd");
+       bitbang_exchange(false, (uint8_t *)swd_seq_jtag_to_swd, 0, swd_seq_jtag_to_swd_len);
+}
+
+static void swd_clear_sticky_errors(void)
+{
+       bitbang_swd_write_reg(swd_cmd(false,  false, DP_ABORT),
+               STKCMPCLR | STKERRCLR | WDERRCLR | ORUNERRCLR, 0);
+}
+
+static void bitbang_swd_read_reg(uint8_t cmd, uint32_t *value, uint32_t ap_delay_clk)
+{
+       LOG_DEBUG("bitbang_swd_read_reg");
+       assert(cmd & SWD_CMD_RnW);
+
+       if (queued_retval != ERROR_OK) {
+               LOG_DEBUG("Skip bitbang_swd_read_reg because queued_retval=%d", queued_retval);
+               return;
+       }
+
+       for (;;) {
+               uint8_t trn_ack_data_parity_trn[DIV_ROUND_UP(4 + 3 + 32 + 1 + 4, 8)];
+
+               cmd |= SWD_CMD_START | (1 << 7);
+               bitbang_exchange(false, &cmd, 0, 8);
+
+               bitbang_interface->swdio_drive(false);
+               bitbang_exchange(true, trn_ack_data_parity_trn, 0, 1 + 3 + 32 + 1 + 1);
+               bitbang_interface->swdio_drive(true);
+
+               int ack = buf_get_u32(trn_ack_data_parity_trn, 1, 3);
+               uint32_t data = buf_get_u32(trn_ack_data_parity_trn, 1 + 3, 32);
+               int parity = buf_get_u32(trn_ack_data_parity_trn, 1 + 3 + 32, 1);
+
+               LOG_DEBUG("%s %s %s reg %X = %08"PRIx32,
+                         ack == SWD_ACK_OK ? "OK" : ack == SWD_ACK_WAIT ? "WAIT" : ack == SWD_ACK_FAULT ? "FAULT" : "JUNK",
+                         cmd & SWD_CMD_APnDP ? "AP" : "DP",
+                         cmd & SWD_CMD_RnW ? "read" : "write",
+                         (cmd & SWD_CMD_A32) >> 1,
+                         data);
+
+               switch (ack) {
+                case SWD_ACK_OK:
+                       if (parity != parity_u32(data)) {
+                               LOG_DEBUG("Wrong parity detected");
+                               queued_retval = ERROR_FAIL;
+                               return;
+                       }
+                       if (value)
+                               *value = data;
+                       if (cmd & SWD_CMD_APnDP)
+                               bitbang_exchange(true, NULL, 0, ap_delay_clk);
+                       return;
+                case SWD_ACK_WAIT:
+                       LOG_DEBUG("SWD_ACK_WAIT");
+                       swd_clear_sticky_errors();
+                       break;
+                case SWD_ACK_FAULT:
+                       LOG_DEBUG("SWD_ACK_FAULT");
+                       queued_retval = ack;
+                       return;
+                default:
+                       LOG_DEBUG("No valid acknowledge: ack=%d", ack);
+                       queued_retval = ack;
+                       return;
+               }
+       }
+}
+
+static void bitbang_swd_write_reg(uint8_t cmd, uint32_t value, uint32_t ap_delay_clk)
+{
+       LOG_DEBUG("bitbang_swd_write_reg");
+       assert(!(cmd & SWD_CMD_RnW));
+
+       if (queued_retval != ERROR_OK) {
+               LOG_DEBUG("Skip bitbang_swd_write_reg because queued_retval=%d", queued_retval);
+               return;
+       }
+
+       for (;;) {
+               uint8_t trn_ack_data_parity_trn[DIV_ROUND_UP(4 + 3 + 32 + 1 + 4, 8)];
+               buf_set_u32(trn_ack_data_parity_trn, 1 + 3 + 1, 32, value);
+               buf_set_u32(trn_ack_data_parity_trn, 1 + 3 + 1 + 32, 1, parity_u32(value));
+
+               cmd |= SWD_CMD_START | (1 << 7);
+               bitbang_exchange(false, &cmd, 0, 8);
+
+               bitbang_interface->swdio_drive(false);
+               bitbang_exchange(true, trn_ack_data_parity_trn, 0, 1 + 3 + 1);
+               bitbang_interface->swdio_drive(true);
+               bitbang_exchange(false, trn_ack_data_parity_trn, 1 + 3 + 1, 32 + 1);
+
+               int ack = buf_get_u32(trn_ack_data_parity_trn, 1, 3);
+               LOG_DEBUG("%s %s %s reg %X = %08"PRIx32,
+                         ack == SWD_ACK_OK ? "OK" : ack == SWD_ACK_WAIT ? "WAIT" : ack == SWD_ACK_FAULT ? "FAULT" : "JUNK",
+                         cmd & SWD_CMD_APnDP ? "AP" : "DP",
+                         cmd & SWD_CMD_RnW ? "read" : "write",
+                         (cmd & SWD_CMD_A32) >> 1,
+                         buf_get_u32(trn_ack_data_parity_trn, 1 + 3 + 1, 32));
+
+               switch (ack) {
+                case SWD_ACK_OK:
+                       if (cmd & SWD_CMD_APnDP)
+                               bitbang_exchange(true, NULL, 0, ap_delay_clk);
+                       return;
+                case SWD_ACK_WAIT:
+                       LOG_DEBUG("SWD_ACK_WAIT");
+                       swd_clear_sticky_errors();
+                       break;
+                case SWD_ACK_FAULT:
+                       LOG_DEBUG("SWD_ACK_FAULT");
+                       queued_retval = ack;
+                       return;
+                default:
+                       LOG_DEBUG("No valid acknowledge: ack=%d", ack);
+                       queued_retval = ack;
+                       return;
+               }
+       }
+}
+
+static int bitbang_swd_run_queue(void)
+{
+       LOG_DEBUG("bitbang_swd_run_queue");
+       /* A transaction must be followed by another transaction or at least 8 idle cycles to
+        * ensure that data is clocked through the AP. */
+       bitbang_exchange(true, NULL, 0, 8);
+
+       int retval = queued_retval;
+       queued_retval = ERROR_OK;
+       LOG_DEBUG("SWD queue return value: %02x", retval);
+       return retval;
+}
+
+const struct swd_driver bitbang_swd = {
+       .init = bitbang_swd_init,
+       .switch_seq = bitbang_swd_switch_seq,
+       .read_reg = bitbang_swd_read_reg,
+       .write_reg = bitbang_swd_write_reg,
+       .run = bitbang_swd_run_queue,
+};

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)