idcode = buf_get_u32(buffer, 0, 32);
- command_print(CMD_CTX, "str9xpec part id: 0x%8.8" PRIx32 "", idcode);
+ command_print(CMD, "str9xpec part id: 0x%8.8" PRIx32 "", idcode);
free(buffer);
/* boot bank */
if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1))
- command_print(CMD_CTX, "CS Map: bank1");
+ command_print(CMD, "CS Map: bank1");
else
- command_print(CMD_CTX, "CS Map: bank0");
+ command_print(CMD, "CS Map: bank0");
/* OTP lock */
if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_OTPBIT, 1))
- command_print(CMD_CTX, "OTP Lock: OTP Locked");
+ command_print(CMD, "OTP Lock: OTP Locked");
else
- command_print(CMD_CTX, "OTP Lock: OTP Unlocked");
+ command_print(CMD, "OTP Lock: OTP Unlocked");
/* LVD Threshold */
if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1))
- command_print(CMD_CTX, "LVD Threshold: 2.7v");
+ command_print(CMD, "LVD Threshold: 2.7v");
else
- command_print(CMD_CTX, "LVD Threshold: 2.4v");
+ command_print(CMD, "LVD Threshold: 2.4v");
/* LVD reset warning */
if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1))
- command_print(CMD_CTX, "LVD Reset Warning: VDD or VDDQ Inputs");
+ command_print(CMD, "LVD Reset Warning: VDD or VDDQ Inputs");
else
- command_print(CMD_CTX, "LVD Reset Warning: VDD Input Only");
+ command_print(CMD, "LVD Reset Warning: VDD Input Only");
/* LVD reset select */
if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1))
- command_print(CMD_CTX, "LVD Reset Selection: VDD or VDDQ Inputs");
+ command_print(CMD, "LVD Reset Selection: VDD or VDDQ Inputs");
else
- command_print(CMD_CTX, "LVD Reset Selection: VDD Input Only");
+ command_print(CMD, "LVD Reset Selection: VDD Input Only");
return ERROR_OK;
}
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
return ERROR_FLASH_OPERATION_FAILED;
- command_print(CMD_CTX, "str9xpec write options complete.\n"
+ command_print(CMD, "str9xpec write options complete.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.");
if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
return ERROR_FLASH_OPERATION_FAILED;
- command_print(CMD_CTX, "str9xpec unlocked.\n"
+ command_print(CMD, "str9xpec unlocked.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.");
tap0 = str9xpec_info->tap;
if (tap0 == NULL) {
/* things are *WRONG* */
- command_print(CMD_CTX, "**STR9FLASH** (tap0) invalid chain?");
+ command_print(CMD, "**STR9FLASH** (tap0) invalid chain?");
return ERROR_FAIL;
}
tap1 = tap0->next_tap;
if (tap1 == NULL) {
/* things are *WRONG* */
- command_print(CMD_CTX, "**STR9FLASH** (tap1) invalid chain?");
+ command_print(CMD, "**STR9FLASH** (tap1) invalid chain?");
return ERROR_FAIL;
}
tap2 = tap1->next_tap;
if (tap2 == NULL) {
/* things are *WRONG* */
- command_print(CMD_CTX, "**STR9FLASH** (tap2) invalid chain?");
+ command_print(CMD, "**STR9FLASH** (tap2) invalid chain?");
return ERROR_FAIL;
}