Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
stm32f1x: Fix byte order bug and remove unnecessary cast
[openocd.git] / src / flash / nor / stm32f1x.c
diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c
index 7e32098c3276f4a1f7096ed7dc785ca9f7b475f5..af7d9ea3970034cf04d446d12625cbb5bfb0231e 100644 (file)
--- a/src/flash/nor/stm32f1x.c
+++ b/src/flash/nor/stm32f1x.c
@@ -21,7 +21,7 @@
  *   You should have received a copy of the GNU General Public License     *
  *   along with this program; if not, write to the                         *
  *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -150,6 +150,9 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
        stm32x_info->register_base = FLASH_REG_BASE_B0;
        stm32x_info->user_bank_size = bank->size;
 
+       /* the stm32l erased value is 0x00 */
+       bank->default_padded_value = 0x00;
+
        return ERROR_OK;
 }
 
@@ -364,11 +367,6 @@ static int stm32x_protect_check(struct flash_bank *bank)
        int num_bits;
        int set;
 
-       if (target->state != TARGET_HALTED) {
-               LOG_ERROR("Target not halted");
-               return ERROR_TARGET_NOT_HALTED;
-       }
-
        int retval = stm32x_check_operation_supported(bank);
        if (ERROR_OK != retval)
                return retval;
@@ -628,7 +626,7 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
        };
 
        retval = target_write_buffer(target, write_algorithm->address,
-                       sizeof(stm32x_flash_write_code), (uint8_t *)stm32x_flash_write_code);
+                       sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
        if (retval != ERROR_OK)
                return retval;
 
@@ -927,6 +925,7 @@ static int stm32x_probe(struct flash_bank *bank)
                stm32x_info->default_rdp = 0x55AA;
                break;
        case 0x440: /* stm32f0x */
+       case 0x444:
                page_size = 1024;
                stm32x_info->ppage_size = 4;
                max_flash_size_in_kb = 64;
@@ -1020,203 +1019,182 @@ COMMAND_HANDLER(stm32x_handle_part_id_command)
 
 static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
 {
-       uint32_t device_id;
-       int printed;
+       uint32_t dbgmcu_idcode;
 
                /* read stm32 device id register */
-       int retval = stm32x_get_device_id(bank, &device_id);
+       int retval = stm32x_get_device_id(bank, &dbgmcu_idcode);
        if (retval != ERROR_OK)
                return retval;
 
-       if ((device_id & 0xfff) == 0x410) {
-               printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
+       uint16_t device_id = dbgmcu_idcode & 0xfff;
+       uint16_t rev_id = dbgmcu_idcode >> 16;
+       const char *device_str;
+       const char *rev_str = NULL;
 
-               switch (device_id >> 16) {
-                       case 0x0000:
-                               snprintf(buf, buf_size, "A");
-                               break;
+       switch (device_id) {
+       case 0x410:
+               device_str = "STM32F10x (Medium Density)";
 
-                       case 0x2000:
-                               snprintf(buf, buf_size, "B");
-                               break;
+               switch (rev_id) {
+               case 0x0000:
+                       rev_str = "A";
+                       break;
 
-                       case 0x2001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
+               case 0x2000:
+                       rev_str = "B";
+                       break;
 
-                       case 0x2003:
-                               snprintf(buf, buf_size, "Y");
-                               break;
+               case 0x2001:
+                       rev_str = "Z";
+                       break;
 
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               case 0x2003:
+                       rev_str = "Y";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x412) {
-               printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x412:
+               device_str = "STM32F10x (Low Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x414) {
-               printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x414:
+               device_str = "STM32F10x (High Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
+
+               case 0x1003:
+                       rev_str = "Y";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x418) {
-               printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x418:
+               device_str = "STM32F10x (Connectivity)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x420) {
-               printed = snprintf(buf, buf_size, "stm32x (Value) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x420:
+               device_str = "STM32F100 (Low/Medium Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x422) {
-               printed = snprintf(buf, buf_size, "stm32f30x - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       case 0x2000:
-                               snprintf(buf, buf_size, "B");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x422:
+               device_str = "STM32F30x";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
+
+               case 0x1003:
+                       rev_str = "Y";
+                       break;
+
+               case 0x2000:
+                       rev_str = "B";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x428) {
-               printed = snprintf(buf, buf_size, "stm32x (Value HD) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x428:
+               device_str = "STM32F100 (High Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x430) {
-               printed = snprintf(buf, buf_size, "stm32x (XL) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x430:
+               device_str = "STM32F10x (XL Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x432) {
-               printed = snprintf(buf, buf_size, "stm32f37x - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x2000:
-                               snprintf(buf, buf_size, "B");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x432:
+               device_str = "STM32F37x";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x2000:
+                       rev_str = "B";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x440) {
-               printed = snprintf(buf, buf_size, "stm32f0x - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "1.0");
-                               break;
-
-                       case 0x2000:
-                               snprintf(buf, buf_size, "2.0");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x440:
+       case 0x444:
+               device_str = "STM32F0xx";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "1.0";
+                       break;
+
+               case 0x2000:
+                       rev_str = "2.0";
+                       break;
                }
-       } else {
-               snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
+               break;
+
+       default:
+               snprintf(buf, buf_size, "Cannot identify target as a STM32F0/1/3\n");
                return ERROR_FAIL;
        }
 
+       if (rev_str != NULL)
+               snprintf(buf, buf_size, "%s - Rev: %s", device_str, rev_str);
+       else
+               snprintf(buf, buf_size, "%s - Rev: unknown (0x%04x)", device_str, rev_id);
+
        return ERROR_OK;
 }
 
@@ -1338,10 +1316,10 @@ COMMAND_HANDLER(stm32x_handle_options_read_command)
 
        int user_data = optionbyte;
 
-       if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1))
+       if (optionbyte >> OPT_ERROR & 1)
                command_print(CMD_CTX, "Option Byte Complement Error");
 
-       if (buf_get_u32((uint8_t *)&optionbyte, OPT_READOUT, 1))
+       if (optionbyte >> OPT_READOUT & 1)
                command_print(CMD_CTX, "Readout Protection On");
        else
                command_print(CMD_CTX, "Readout Protection Off");
@@ -1349,23 +1327,23 @@ COMMAND_HANDLER(stm32x_handle_options_read_command)
        /* user option bytes are offset depending on variant */
        optionbyte >>= stm32x_info->option_offset;
 
-       if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1))
+       if (optionbyte >> OPT_RDWDGSW & 1)
                command_print(CMD_CTX, "Software Watchdog");
        else
                command_print(CMD_CTX, "Hardware Watchdog");
 
-       if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTOP, 1))
+       if (optionbyte >> OPT_RDRSTSTOP & 1)
                command_print(CMD_CTX, "Stop: No reset generated");
        else
                command_print(CMD_CTX, "Stop: Reset generated");
 
-       if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTDBY, 1))
+       if (optionbyte >> OPT_RDRSTSTDBY & 1)
                command_print(CMD_CTX, "Standby: No reset generated");
        else
                command_print(CMD_CTX, "Standby: Reset generated");
 
        if (stm32x_info->has_dual_banks) {
-               if (buf_get_u32((uint8_t *)&optionbyte, OPT_BFB2, 1))
+               if (optionbyte >> OPT_BFB2 & 1)
                        command_print(CMD_CTX, "Boot: Bank 0");
                else
                        command_print(CMD_CTX, "Boot: Bank 1");
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)