flash: stm32f1x: write option bytes using the loader

[openocd.git] / src / flash / nor / stm32f1x.c

diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c
index d021bbfb3835a4a81f06ebc4de97d426197cdc70..58b7ba16acf7f24e3f288d50010bd9c0eaae65bb 100644 (file)
--- a/src/flash/nor/stm32f1x.c
+++ b/src/flash/nor/stm32f1x.c
@@ -125,6 +125,8 @@ struct stm32x_flash_bank {
 
 static int stm32x_mass_erase(struct flash_bank *bank);
 static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id);
+static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
+               uint32_t offset, uint32_t count);
 
 /* flash bank stm32x <base> <size> 0 0 <target#>
  */
@@ -252,14 +254,6 @@ static int stm32x_erase_options(struct flash_bank *bank)
 
        stm32x_info = bank->driver_priv;
 
-       /* stlink is currently does not support 16bit
-        * read/writes. so we cannot write option bytes */
-       struct armv7m_common *armv7m = target_to_armv7m(target);
-       if (armv7m && armv7m->stlink) {
-               LOG_ERROR("Option bytes currently unsupported for stlink");
-               return ERROR_FAIL;
-       }
-
        /* read current options */
        stm32x_read_options(bank);
 
@@ -327,59 +321,24 @@ static int stm32x_write_options(struct flash_bank *bank)
        if (retval != ERROR_OK)
                return retval;
 
-       /* write user option byte */
-       retval = target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options);
-       if (retval != ERROR_OK)
-               return retval;
-
-       retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
-       if (retval != ERROR_OK)
-               return retval;
-
-       /* write protection byte 1 */
-       retval = target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]);
-       if (retval != ERROR_OK)
-               return retval;
-
-       retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
-       if (retval != ERROR_OK)
-               return retval;
-
-       /* write protection byte 2 */
-       retval = target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]);
-       if (retval != ERROR_OK)
-               return retval;
-
-       retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
-       if (retval != ERROR_OK)
-               return retval;
-
-       /* write protection byte 3 */
-       retval = target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]);
-       if (retval != ERROR_OK)
-               return retval;
-
-       retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
-       if (retval != ERROR_OK)
-               return retval;
-
-       /* write protection byte 4 */
-       retval = target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]);
-       if (retval != ERROR_OK)
-               return retval;
-
-       retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
-       if (retval != ERROR_OK)
-               return retval;
-
-       /* write readout protection bit */
-       retval = target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP);
-       if (retval != ERROR_OK)
-               return retval;
-
-       retval = stm32x_wait_status_busy(bank, FLASH_WRITE_TIMEOUT);
-       if (retval != ERROR_OK)
+       uint8_t opt_bytes[16];
+
+       target_buffer_set_u16(target, opt_bytes, stm32x_info->option_bytes.RDP);
+       target_buffer_set_u16(target, opt_bytes + 2, stm32x_info->option_bytes.user_options);
+       target_buffer_set_u16(target, opt_bytes + 4, 0x00FF);
+       target_buffer_set_u16(target, opt_bytes + 6, 0x00FF);
+       target_buffer_set_u16(target, opt_bytes + 8, stm32x_info->option_bytes.protection[0]);
+       target_buffer_set_u16(target, opt_bytes + 10, stm32x_info->option_bytes.protection[1]);
+       target_buffer_set_u16(target, opt_bytes + 12, stm32x_info->option_bytes.protection[2]);
+       target_buffer_set_u16(target, opt_bytes + 14, stm32x_info->option_bytes.protection[3]);
+
+       uint32_t offset = STM32_OB_RDP - bank->base;
+       retval = stm32x_write_block(bank, opt_bytes, offset, sizeof(opt_bytes) / 2);
+       if (retval != ERROR_OK) {
+               if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+                       LOG_ERROR("working area required to erase options bytes");
                return retval;
+       }
 
        retval = target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
        if (retval != ERROR_OK)
@@ -1142,11 +1101,15 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
 
                switch (device_id >> 16) {
                        case 0x1000:
-                               snprintf(buf, buf_size, "1.0");
+                               snprintf(buf, buf_size, "A");
+                               break;
+
+                       case 0x1001:
+                               snprintf(buf, buf_size, "Z");
                                break;
 
                        case 0x2000:
-                               snprintf(buf, buf_size, "2.0");
+                               snprintf(buf, buf_size, "B");
                                break;
 
                        default:
@@ -1192,11 +1155,11 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
 
                switch (device_id >> 16) {
                        case 0x1000:
-                               snprintf(buf, buf_size, "1.0");
+                               snprintf(buf, buf_size, "A");
                                break;
 
                        case 0x2000:
-                               snprintf(buf, buf_size, "2.0");
+                               snprintf(buf, buf_size, "B");
                                break;
 
                        default: