Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
flash/stm32*: Rewrite info functions
[openocd.git] / src / flash / nor / stm32f1x.c
diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c
index 17df121b7c56802192cdde0695cd01686dfa5617..3c360fcd0f89d748b9a2eeb00a245d4ba176f832 100644 (file)
--- a/src/flash/nor/stm32f1x.c
+++ b/src/flash/nor/stm32f1x.c
@@ -21,7 +21,7 @@
  *   You should have received a copy of the GNU General Public License     *
  *   along with this program; if not, write to the                         *
  *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -124,6 +124,8 @@ struct stm32x_flash_bank {
        uint32_t register_base;
        uint16_t default_rdp;
        int user_data_offset;
+       int option_offset;
+       uint32_t user_bank_size;
 };
 
 static int stm32x_mass_erase(struct flash_bank *bank);
@@ -146,6 +148,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
        stm32x_info->probed = 0;
        stm32x_info->has_dual_banks = false;
        stm32x_info->register_base = FLASH_REG_BASE_B0;
+       stm32x_info->user_bank_size = bank->size;
 
        return ERROR_OK;
 }
@@ -204,7 +207,7 @@ static int stm32x_wait_status_busy(struct flash_bank *bank, int timeout)
        return retval;
 }
 
-int stm32x_check_operation_supported(struct flash_bank *bank)
+static int stm32x_check_operation_supported(struct flash_bank *bank)
 {
        struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
 
@@ -231,7 +234,7 @@ static int stm32x_read_options(struct flash_bank *bank)
        if (retval != ERROR_OK)
                return retval;
 
-       stm32x_info->option_bytes.user_options = (uint16_t)0xFFF0 | ((optiondata >> 2) & 0x0f);
+       stm32x_info->option_bytes.user_options = (optiondata >> stm32x_info->option_offset >> 2) & 0xffff;
        stm32x_info->option_bytes.user_data = (optiondata >> stm32x_info->user_data_offset) & 0xffff;
        stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
 
@@ -361,11 +364,6 @@ static int stm32x_protect_check(struct flash_bank *bank)
        int num_bits;
        int set;
 
-       if (target->state != TARGET_HALTED) {
-               LOG_ERROR("Target not halted");
-               return ERROR_TARGET_NOT_HALTED;
-       }
-
        int retval = stm32x_check_operation_supported(bank);
        if (ERROR_OK != retval)
                return retval;
@@ -857,6 +855,7 @@ static int stm32x_probe(struct flash_bank *bank)
        stm32x_info->probed = 0;
        stm32x_info->register_base = FLASH_REG_BASE_B0;
        stm32x_info->user_data_offset = 10;
+       stm32x_info->option_offset = 0;
 
        /* default factory protection level */
        stm32x_info->default_rdp = 0x5AA5;
@@ -900,6 +899,7 @@ static int stm32x_probe(struct flash_bank *bank)
                stm32x_info->ppage_size = 2;
                max_flash_size_in_kb = 256;
                stm32x_info->user_data_offset = 16;
+               stm32x_info->option_offset = 6;
                stm32x_info->default_rdp = 0x55AA;
                break;
        case 0x428: /* value line High density */
@@ -918,13 +918,16 @@ static int stm32x_probe(struct flash_bank *bank)
                stm32x_info->ppage_size = 2;
                max_flash_size_in_kb = 256;
                stm32x_info->user_data_offset = 16;
+               stm32x_info->option_offset = 6;
                stm32x_info->default_rdp = 0x55AA;
                break;
        case 0x440: /* stm32f0x */
+       case 0x444:
                page_size = 1024;
                stm32x_info->ppage_size = 4;
                max_flash_size_in_kb = 64;
                stm32x_info->user_data_offset = 16;
+               stm32x_info->option_offset = 6;
                stm32x_info->default_rdp = 0x55AA;
                break;
        default:
@@ -956,6 +959,13 @@ static int stm32x_probe(struct flash_bank *bank)
                }
        }
 
+       /* if the user sets the size manually then ignore the probed value
+        * this allows us to work around devices that have a invalid flash size register value */
+       if (stm32x_info->user_bank_size) {
+               LOG_INFO("ignoring flash probed value, using configured bank size");
+               flash_size_in_kb = stm32x_info->user_bank_size / 1024;
+       }
+
        LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
 
        /* did we assign flash size? */
@@ -1006,203 +1016,174 @@ COMMAND_HANDLER(stm32x_handle_part_id_command)
 
 static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
 {
-       uint32_t device_id;
-       int printed;
+       uint32_t dbgmcu_idcode;
 
                /* read stm32 device id register */
-       int retval = stm32x_get_device_id(bank, &device_id);
+       int retval = stm32x_get_device_id(bank, &dbgmcu_idcode);
        if (retval != ERROR_OK)
                return retval;
 
-       if ((device_id & 0xfff) == 0x410) {
-               printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
+       uint16_t device_id = dbgmcu_idcode & 0xfff;
+       uint16_t rev_id = dbgmcu_idcode >> 16;
+       const char *device_str;
+       const char *rev_str = NULL;
 
-               switch (device_id >> 16) {
-                       case 0x0000:
-                               snprintf(buf, buf_size, "A");
-                               break;
+       switch (device_id) {
+       case 0x410:
+               device_str = "stm32x (Medium Density)";
 
-                       case 0x2000:
-                               snprintf(buf, buf_size, "B");
-                               break;
+               switch (rev_id) {
+               case 0x0000:
+                       rev_str = "A";
+                       break;
 
-                       case 0x2001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
+               case 0x2000:
+                       rev_str = "B";
+                       break;
 
-                       case 0x2003:
-                               snprintf(buf, buf_size, "Y");
-                               break;
+               case 0x2001:
+                       rev_str = "Z";
+                       break;
 
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               case 0x2003:
+                       rev_str = "Y";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x412) {
-               printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x412:
+               device_str = "stm32x (Low Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x414) {
-               printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x414:
+               device_str = "stm32x (High Density)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x418) {
-               printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x418:
+               device_str = "stm32x (Connectivity)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x420) {
-               printed = snprintf(buf, buf_size, "stm32x (Value) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x420:
+               device_str = "stm32x (Value)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x422) {
-               printed = snprintf(buf, buf_size, "stm32f30x - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       case 0x2000:
-                               snprintf(buf, buf_size, "B");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x422:
+               device_str = "stm32f30x";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
+
+               case 0x2000:
+                       rev_str = "B";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x428) {
-               printed = snprintf(buf, buf_size, "stm32x (Value HD) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x1001:
-                               snprintf(buf, buf_size, "Z");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x428:
+               device_str = "stm32x (Value HD)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x1001:
+                       rev_str = "Z";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x430) {
-               printed = snprintf(buf, buf_size, "stm32x (XL) - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x430:
+               device_str = "stm32x (XL)";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x432) {
-               printed = snprintf(buf, buf_size, "stm32f37x - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "A");
-                               break;
-
-                       case 0x2000:
-                               snprintf(buf, buf_size, "B");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x432:
+               device_str = "stm32f37x";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "A";
+                       break;
+
+               case 0x2000:
+                       rev_str = "B";
+                       break;
                }
-       } else if ((device_id & 0xfff) == 0x440) {
-               printed = snprintf(buf, buf_size, "stm32f0x - Rev: ");
-               buf += printed;
-               buf_size -= printed;
-
-               switch (device_id >> 16) {
-                       case 0x1000:
-                               snprintf(buf, buf_size, "1.0");
-                               break;
-
-                       case 0x2000:
-                               snprintf(buf, buf_size, "2.0");
-                               break;
-
-                       default:
-                               snprintf(buf, buf_size, "unknown");
-                               break;
+               break;
+
+       case 0x440:
+       case 0x444:
+               device_str = "stm32f0x";
+
+               switch (rev_id) {
+               case 0x1000:
+                       rev_str = "1.0";
+                       break;
+
+               case 0x2000:
+                       rev_str = "2.0";
+                       break;
                }
-       } else {
+               break;
+
+       default:
                snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
                return ERROR_FAIL;
        }
 
+       if (rev_str != NULL)
+               snprintf(buf, buf_size, "%s - Rev: %s", device_str, rev_str);
+       else
+               snprintf(buf, buf_size, "%s - Rev: unknown (0x%04x)", device_str, rev_id);
+
        return ERROR_OK;
 }
 
@@ -1322,6 +1303,8 @@ COMMAND_HANDLER(stm32x_handle_options_read_command)
                return retval;
        command_print(CMD_CTX, "Option Byte: 0x%" PRIx32 "", optionbyte);
 
+       int user_data = optionbyte;
+
        if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1))
                command_print(CMD_CTX, "Option Byte Complement Error");
 
@@ -1330,6 +1313,9 @@ COMMAND_HANDLER(stm32x_handle_options_read_command)
        else
                command_print(CMD_CTX, "Readout Protection Off");
 
+       /* user option bytes are offset depending on variant */
+       optionbyte >>= stm32x_info->option_offset;
+
        if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1))
                command_print(CMD_CTX, "Software Watchdog");
        else
@@ -1353,9 +1339,9 @@ COMMAND_HANDLER(stm32x_handle_options_read_command)
        }
 
        command_print(CMD_CTX, "User Option0: 0x%02" PRIx8,
-                       (optionbyte >> stm32x_info->user_data_offset) & 0xff);
+                       (user_data >> stm32x_info->user_data_offset) & 0xff);
        command_print(CMD_CTX, "User Option1: 0x%02" PRIx8,
-                       (optionbyte >> (stm32x_info->user_data_offset + 8)) & 0xff);
+                       (user_data >> (stm32x_info->user_data_offset + 8)) & 0xff);
 
        return ERROR_OK;
 }
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)