flash: nor: ath79: remove base calculation
[openocd.git] / src / flash / nor / sim3x.c
index 7ec00767ec7a247efaaaeed7a82f9c75896d1f8a..f282ba0897033c28b50e884c0fa4327be403bf13 100644 (file)
@@ -1,5 +1,5 @@
 /***************************************************************************
- *   Copyright (C) 2014 by Ladislav Bábel                                  *
+ *   Copyright (C) 2014 by Ladislav Bábel                                  *
  *   ladababel@seznam.cz                                                   *
  *                                                                         *
  *   Copyright (C) 2015 by Andreas Bomholtz                                *
@@ -14,6 +14,9 @@
  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -748,7 +751,7 @@ static int sim3x_read_info(struct flash_bank *bank)
        }
 
        if (((cpuid >> 4) & 0xfff) != 0xc23) {
-               LOG_ERROR("Target is not CortexM3");
+               LOG_ERROR("Target is not Cortex-M3");
                return ERROR_FAIL;
        }
 
@@ -864,14 +867,12 @@ static int sim3x_flash_info(struct flash_bank *bank, char *buf, int buf_size)
                                return ERROR_BUF_TOO_SMALL;
 
                        /* Package */
-                       if (sim3x_info->device_package) {
-                               printed = snprintf(buf, buf_size, "-G%s", sim3x_info->device_package);
-                               buf += printed;
-                               buf_size -= printed;
+                       printed = snprintf(buf, buf_size, "-G%s", sim3x_info->device_package);
+                       buf += printed;
+                       buf_size -= printed;
 
-                               if (buf_size <= 0)
-                                       return ERROR_BUF_TOO_SMALL;
-                       }
+                       if (buf_size <= 0)
+                               return ERROR_BUF_TOO_SMALL;
                }
        }
 
@@ -895,7 +896,7 @@ static int ap_write_register(struct adiv5_dap *dap, unsigned reg, uint32_t value
        int retval;
        LOG_DEBUG("DAP_REG[0x%02x] <- %08" PRIX32, reg, value);
 
-       retval = dap_queue_ap_write(dap, reg, value);
+       retval = dap_queue_ap_write(dap_ap(dap, SIM3X_AP), reg, value);
        if (retval != ERROR_OK) {
                LOG_DEBUG("DAP: failed to queue a write request");
                return retval;
@@ -913,7 +914,8 @@ static int ap_write_register(struct adiv5_dap *dap, unsigned reg, uint32_t value
 static int ap_read_register(struct adiv5_dap *dap, unsigned reg, uint32_t *result)
 {
        int retval;
-       retval = dap_queue_ap_read(dap, reg, result);
+
+       retval = dap_queue_ap_read(dap_ap(dap, SIM3X_AP), reg, result);
        if (retval != ERROR_OK) {
                LOG_DEBUG("DAP: failed to queue a read request");
                return retval;
@@ -961,9 +963,6 @@ COMMAND_HANDLER(sim3x_mass_erase)
                return ERROR_FAIL;
        }
 
-       const uint8_t origninal_ap = dap->ap_current >> 24;
-       dap_ap_select(dap, SIM3X_AP);
-
        ret = ap_read_register(dap, SIM3X_AP_ID, &val);
        if (ret != ERROR_OK)
                return ret;
@@ -990,8 +989,6 @@ COMMAND_HANDLER(sim3x_mass_erase)
        if (ret != ERROR_OK)
                return ret;
 
-       dap_ap_select(dap, origninal_ap);
-
        LOG_INFO("Mass erase success");
        return ERROR_OK;
 }
@@ -1015,13 +1012,10 @@ COMMAND_HANDLER(sim3x_lock)
                        return ret;
 
                if ((val & CPUID_CHECK_VALUE_MASK) != CPUID_CHECK_VALUE) {
-                       LOG_ERROR("Target is not ARM CortexM3 or is already locked");
+                       LOG_ERROR("Target is not ARM Cortex-M3 or is already locked");
                        return ERROR_FAIL;
                }
        } else {
-               const uint8_t origninal_ap = dap->ap_current >> 24;
-               dap_ap_select(dap, SIM3X_AP);
-
                /* check SIM3X_AP_ID */
                ret = ap_read_register(dap, SIM3X_AP_ID, &val);
                if (ret != ERROR_OK)
@@ -1041,8 +1035,6 @@ COMMAND_HANDLER(sim3x_lock)
                        if (ret != ERROR_OK)
                                return ret;
 
-                       dap_ap_select(dap, origninal_ap);
-
                        if (val & SIM3X_AP_INIT_STAT_LOCK) {
                                LOG_INFO("Target is already locked");
                                return ERROR_OK;
@@ -1051,8 +1043,6 @@ COMMAND_HANDLER(sim3x_lock)
                                return ERROR_FAIL;
                        }
                }
-
-               dap_ap_select(dap, origninal_ap);
        }
 
        ret = target_read_u32(target, LOCK_WORD_ADDRESS, &val);
@@ -1132,5 +1122,6 @@ struct flash_driver sim3x_flash = {
        .auto_probe = sim3x_auto_probe,
        .erase_check = default_flash_blank_check,
        .protect_check = sim3x_flash_protect_check,
-       .info = sim3x_flash_info
+       .info = sim3x_flash_info,
+       .free_driver_priv = default_flash_free_driver_priv,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)