Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
helper/command: change prototype of command_print/command_print_sameline
[openocd.git] / src / flash / nor / niietcm4.c
diff --git a/src/flash/nor/niietcm4.c b/src/flash/nor/niietcm4.c
index b034ee127854b56cc7fcdfe37cf3f0b7a051e0e8..62549f206baf9a79dbabe1a366f27b8748f291b1 100644 (file)
--- a/src/flash/nor/niietcm4.c
+++ b/src/flash/nor/niietcm4.c
@@ -425,7 +425,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_read_byte_command)
        retval = target_read_u32(target, UFMD, &uflash_data);
        if (retval != ERROR_OK)
                return retval;
-       command_print(CMD_CTX,  "Read userflash %s region:\n"
+       command_print(CMD,  "Read userflash %s region:\n"
                                                        "address = 0x%04x,\n"
                                                        "value   = 0x%02x.", CMD_ARGV[0], uflash_addr, uflash_data);
        return retval;
@@ -467,7 +467,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command)
 
        int page_num = uflash_addr/USERFLASH_PAGE_SIZE;
 
-       command_print(CMD_CTX, "Write userflash %s region:\n"
+       command_print(CMD, "Write userflash %s region:\n"
                                                   "address = 0x%04x,\n"
                                                   "value   = 0x%02x.\n"
                                                   "Please wait ... ", CMD_ARGV[0], uflash_addr, uflash_data);
@@ -483,7 +483,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_write_byte_command)
 
        /* write dump to userflash */
        niietcm4_load_uflash_page(bank, uflash_dump, page_num, mem_type);
-       command_print(CMD_CTX, "done!");
+       command_print(CMD, "done!");
        return retval;
 }
 
@@ -520,7 +520,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_full_erase_command)
        retval = niietcm4_uopstatus_check(bank);
        if (retval != ERROR_OK)
                return retval;
-       command_print(CMD_CTX, "Userflash full erase done!");
+       command_print(CMD, "Userflash full erase done!");
 
        return retval;
 }
@@ -563,7 +563,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_erase_command)
                        return retval;
        }
 
-       command_print(CMD_CTX, "Erase %s userflash pages %d through %d done!", CMD_ARGV[0], first, last);
+       command_print(CMD, "Erase %s userflash pages %d through %d done!", CMD_ARGV[0], first, last);
 
        return retval;
 }
@@ -621,9 +621,9 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_check_command)
                        return retval;
 
                if (uflash_data & INFOWORD3_LOCK_IFB_UF)
-                       command_print(CMD_CTX, "All sectors of info userflash are not protected!");
+                       command_print(CMD, "All sectors of info userflash are not protected!");
                else
-                       command_print(CMD_CTX, "All sectors of info userflash are protected!");
+                       command_print(CMD, "All sectors of info userflash are protected!");
        } else {
                uflash_addr = UF_LOCK_ADDR;
                uflash_cmd = UFMC_MAGIC_KEY | UFMC_READ_IFB;
@@ -645,10 +645,10 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_check_command)
 
                        for (j = 0; j < 8; j++) {
                                if (uflash_data & 0x1)
-                                       command_print(CMD_CTX, "Userflash sector #%03d: 0x%04x (0x100) is not protected!",
+                                       command_print(CMD, "Userflash sector #%03d: 0x%04x (0x100) is not protected!",
                                                                                        i*8+j, (i*8+j)*USERFLASH_PAGE_SIZE);
                                else
-                                       command_print(CMD_CTX, "Userflash sector #%03d: 0x%04x (0x100) is protected!",
+                                       command_print(CMD, "Userflash sector #%03d: 0x%04x (0x100) is protected!",
                                                                                        i*8+j, (i*8+j)*USERFLASH_PAGE_SIZE);
                                uflash_data = uflash_data >> 1;
                        }
@@ -693,11 +693,11 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_command)
 
        int set;
        if (strcmp("on", CMD_ARGV[3]) == 0) {
-               command_print(CMD_CTX, "Try to enable %s userflash sectors %d through %d protection. Please wait ... ",
+               command_print(CMD, "Try to enable %s userflash sectors %d through %d protection. Please wait ... ",
                                                                CMD_ARGV[0], first, last);
                set = 1;
        } else if (strcmp("off", CMD_ARGV[3]) == 0) {
-               command_print(CMD_CTX, "Try to disable %s userflash sectors %d through %d protection. Please wait ... ",
+               command_print(CMD, "Try to disable %s userflash sectors %d through %d protection. Please wait ... ",
                                                                CMD_ARGV[0], first, last);
                set = 0;
        } else
@@ -707,7 +707,7 @@ COMMAND_HANDLER(niietcm4_handle_uflash_protect_command)
                if (retval != ERROR_OK)
                        return retval;
 
-       command_print(CMD_CTX, "done!");
+       command_print(CMD, "done!");
        return retval;
 }
 
@@ -733,10 +733,10 @@ COMMAND_HANDLER(niietcm4_handle_bflash_info_remap_command)
 
        int set;
        if (strcmp("on", CMD_ARGV[0]) == 0) {
-               command_print(CMD_CTX, "Try to enable bootflash info region remap. Please wait ...");
+               command_print(CMD, "Try to enable bootflash info region remap. Please wait ...");
                set = 1;
        } else if (strcmp("off", CMD_ARGV[0]) == 0) {
-               command_print(CMD_CTX, "Try to disable bootflash info region remap. Please wait ...");
+               command_print(CMD, "Try to disable bootflash info region remap. Please wait ...");
                set = 0;
        } else
                return ERROR_COMMAND_SYNTAX_ERROR;
@@ -756,7 +756,7 @@ COMMAND_HANDLER(niietcm4_handle_bflash_info_remap_command)
 
        /* write dump to userflash */
        niietcm4_load_uflash_page(bank, uflash_dump, 0, 1);
-       command_print(CMD_CTX, "done!");
+       command_print(CMD, "done!");
 
        return retval;
 }
@@ -814,7 +814,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command)
        else
                return ERROR_COMMAND_SYNTAX_ERROR;
 
-       command_print(CMD_CTX,  "Try to configure external memory boot interface:\n"
+       command_print(CMD,  "Try to configure external memory boot interface:\n"
                                                        "port = %s\n"
                                                        "pin  = %s\n"
                                                        "func = %s\n"
@@ -833,7 +833,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_cfg_command)
 
        /* write dump to userflash */
        niietcm4_load_uflash_page(bank, uflash_dump, 0, 1);
-       command_print(CMD_CTX, "done!");
+       command_print(CMD, "done!");
 
        return retval;
 }
@@ -861,10 +861,10 @@ COMMAND_HANDLER(niietcm4_handle_extmem_boot_command)
        int set;
 
        if (strcmp("on", CMD_ARGV[0]) == 0) {
-               command_print(CMD_CTX, "Try to enable boot from external memory. Please wait ...");
+               command_print(CMD, "Try to enable boot from external memory. Please wait ...");
                set = 1;
        } else if (strcmp("off", CMD_ARGV[0]) == 0) {
-               command_print(CMD_CTX, "Try to disable boot from external memory. Please wait ...");
+               command_print(CMD, "Try to disable boot from external memory. Please wait ...");
                set = 0;
        } else
                return ERROR_COMMAND_SYNTAX_ERROR;
@@ -884,7 +884,7 @@ COMMAND_HANDLER(niietcm4_handle_extmem_boot_command)
 
        /* write dump to userflash */
        niietcm4_load_uflash_page(bank, uflash_dump, 0, 1);
-       command_print(CMD_CTX, "done!");
+       command_print(CMD, "done!");
 
        return retval;
 }
@@ -900,7 +900,7 @@ COMMAND_HANDLER(niietcm4_handle_service_mode_erase_command)
                return retval;
        struct target *target = bank->target;
 
-       command_print(CMD_CTX, "Try to perform service mode erase. Please wait ...");
+       command_print(CMD, "Try to perform service mode erase. Please wait ...");
 
        retval = target_write_u32(target, SERVICE_MODE_ERASE_ADDR, 1);
        if (retval != ERROR_OK)
@@ -923,7 +923,7 @@ COMMAND_HANDLER(niietcm4_handle_service_mode_erase_command)
                        }
                busy_sleep(1);  /* can use busy sleep for short times. */
        }
-       command_print(CMD_CTX, "done! All data erased.");
+       command_print(CMD, "done! All data erased.");
 
        return retval;
 }
@@ -938,7 +938,7 @@ COMMAND_HANDLER(niietcm4_handle_driver_info_command)
        if (retval != ERROR_OK)
                return retval;
 
-       command_print(CMD_CTX, "niietcm4 flash driver\n"
+       command_print(CMD, "niietcm4 flash driver\n"
                                                   "version: %d.%d\n"
                                                   "author: Bogdan Kolbov\n"
                                                   "mail: kolbov@niiet.ru",
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)