flash: nor: ath79: remove base calculation
[openocd.git] / src / flash / nor / at91sam3.c
index 6fe71bfb9732e0ce1dc128604e3d662a07d5d602..711918862d95b4156e7bd2f301b12481faa0a5ec 100644 (file)
@@ -8,19 +8,17 @@
  *   Copyright (C) 2011 by Olivier Schonken (at91sam3x* support)           *                                          *
  *                     and Jim Norris                                      *
  *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General public License as published by  *
+ *   it under the terms of the GNU General Public License as published by  *
  *   the Free Software Foundation; either version 2 of the License, or     *
  *   (at your option) any later version.                                   *
  *                                                                         *
  *   This program is distributed in the hope that it will be useful,       *
  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the         *
- *   GNU General public License for more details.                          *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
  *                                                                         *
- *   You should have received a copy of the GNU General public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
 ****************************************************************************/
 
 /* Some of the the lower level code was based on code supplied by
@@ -1518,6 +1516,143 @@ static const struct sam3_chip_details all_sam3_details[] = {
                },
        },
 
+       {
+               .chipid_cidr    = 0x29480360,
+               .name           = "at91sam3n0b",
+               .total_flash_size     = 32 * 1024,
+               .total_sram_size      = 8 * 1024,
+               .n_gpnvms       = 3,
+               .n_banks        = 1,
+
+/*             .bank[0] = { */
+               {
+                       {
+                               .probed = 0,
+                               .pChip  = NULL,
+                               .pBank  = NULL,
+                               .bank_number = 0,
+                               .base_address = FLASH_BANK_BASE_N,
+                               .controller_address = 0x400e0A00,
+                               .flash_wait_states = 6, /* workaround silicon bug */
+                               .present = 1,
+                               .size_bytes = 32 * 1024,
+                               .nsectors   = 2,
+                               .sector_size = 16384,
+                               .page_size   = 256,
+                       },
+
+/*             .bank[1] = { */
+                       {
+                               .present = 0,
+                               .probed = 0,
+                               .bank_number = 1,
+                       },
+               },
+       },
+
+       {
+               .chipid_cidr    = 0x29380360,
+               .name           = "at91sam3n0a",
+               .total_flash_size     = 32 * 1024,
+               .total_sram_size      = 8 * 1024,
+               .n_gpnvms       = 3,
+               .n_banks        = 1,
+
+/*             .bank[0] = { */
+               {
+                       {
+                               .probed = 0,
+                               .pChip  = NULL,
+                               .pBank  = NULL,
+                               .bank_number = 0,
+                               .base_address = FLASH_BANK_BASE_N,
+                               .controller_address = 0x400e0A00,
+                               .flash_wait_states = 6, /* workaround silicon bug */
+                               .present = 1,
+                               .size_bytes = 32 * 1024,
+                               .nsectors   = 2,
+                               .sector_size = 16384,
+                               .page_size   = 256,
+                       },
+
+/*             .bank[1] = { */
+                       {
+                               .present = 0,
+                               .probed = 0,
+                               .bank_number = 1,
+                       },
+               },
+       },
+
+       {
+               .chipid_cidr    = 0x29450260,
+               .name           = "at91sam3n00b",
+               .total_flash_size     = 16 * 1024,
+               .total_sram_size      = 4 * 1024,
+               .n_gpnvms       = 3,
+               .n_banks        = 1,
+
+/*             .bank[0] = { */
+               {
+                       {
+                               .probed = 0,
+                               .pChip  = NULL,
+                               .pBank  = NULL,
+                               .bank_number = 0,
+                               .base_address = FLASH_BANK_BASE_N,
+                               .controller_address = 0x400e0A00,
+                               .flash_wait_states = 6, /* workaround silicon bug */
+                               .present = 1,
+                               .size_bytes = 16 * 1024,
+                               .nsectors   = 1,
+                               .sector_size = 16384,
+                               .page_size   = 256,
+                       },
+
+/*             .bank[1] = { */
+                       {
+                               .present = 0,
+                               .probed = 0,
+                               .bank_number = 1,
+                       },
+               },
+       },
+
+       {
+               .chipid_cidr    = 0x29350260,
+               .name           = "at91sam3n00a",
+               .total_flash_size     = 16 * 1024,
+               .total_sram_size      = 4 * 1024,
+               .n_gpnvms       = 3,
+               .n_banks        = 1,
+
+/*             .bank[0] = { */
+               {
+                       {
+                               .probed = 0,
+                               .pChip  = NULL,
+                               .pBank  = NULL,
+                               .bank_number = 0,
+                               .base_address = FLASH_BANK_BASE_N,
+                               .controller_address = 0x400e0A00,
+                               .flash_wait_states = 6, /* workaround silicon bug */
+                               .present = 1,
+                               .size_bytes = 16 * 1024,
+                               .nsectors   = 1,
+                               .sector_size = 16384,
+                               .page_size   = 256,
+                       },
+
+/*             .bank[1] = { */
+                       {
+                               .present = 0,
+                               .probed = 0,
+                               .bank_number = 1,
+                       },
+               },
+       },
+
+
        /* Start at91sam3a series*/
        /* System boots at address 0x0 */
        /* gpnvm[1] = selects boot code */
@@ -2040,7 +2175,7 @@ static int EFC_PerformCommand(struct sam3_bank_private *pPrivate,
 
        int r;
        uint32_t v;
-       long long ms_now, ms_end;
+       int64_t ms_now, ms_end;
 
        /* default */
        if (status)
@@ -2333,7 +2468,7 @@ static uint32_t sam3_reg_fieldname(struct sam3_chip *pChip,
        }
 
        /* show the basics */
-       LOG_USER_N("\t%*s: %*d [0x%0*x] ",
+       LOG_USER_N("\t%*s: %*" PRIu32 " [0x%0*" PRIx32 "] ",
                REG_NAME_WIDTH, regname,
                dwidth, v,
                hwidth, v);
@@ -2345,7 +2480,7 @@ static const char *const eproc_names[] = {
        _unknown,                                       /* 0 */
        "arm946es",                                     /* 1 */
        "arm7tdmi",                                     /* 2 */
-       "cortex-m3",                            /* 3 */
+       "Cortex-M3",                            /* 3 */
        "arm920t",                                      /* 4 */
        "arm926ejs",                            /* 5 */
        _unknown,                                       /* 6 */
@@ -2558,10 +2693,10 @@ static void sam3_explain_ckgr_mcfr(struct sam3_chip *pChip)
        v = (v * pChip->cfg.slow_freq) / 16;
        pChip->cfg.mainosc_freq = v;
 
-       LOG_USER("(%3.03f Mhz (%d.%03dkhz slowclk)",
+       LOG_USER("(%3.03f Mhz (%" PRIu32 ".%03" PRIu32 "khz slowclk)",
                _tomhz(v),
-               pChip->cfg.slow_freq / 1000,
-               pChip->cfg.slow_freq % 1000);
+               (uint32_t)(pChip->cfg.slow_freq / 1000),
+               (uint32_t)(pChip->cfg.slow_freq % 1000));
 }
 
 static void sam3_explain_ckgr_plla(struct sam3_chip *pChip)
@@ -2731,7 +2866,7 @@ static const struct sam3_reg_list sam3_all_regs[] = {
 
 static struct sam3_bank_private *get_sam3_bank_private(struct flash_bank *bank)
 {
-       return (struct sam3_bank_private *)(bank->driver_priv);
+       return bank->driver_priv;
 }
 
 /**
@@ -2831,7 +2966,7 @@ static int sam3_GetInfo(struct sam3_chip *pChip)
                /* display all regs */
                LOG_DEBUG("Start: %s", pReg->name);
                regval = *sam3_get_reg_ptr(&(pChip->cfg), pReg);
-               LOG_USER("%*s: [0x%08x] -> 0x%08x",
+               LOG_USER("%*s: [0x%08" PRIx32 "] -> 0x%08" PRIx32,
                        REG_NAME_WIDTH,
                        pReg->name,
                        pReg->address,
@@ -2847,7 +2982,7 @@ static int sam3_GetInfo(struct sam3_chip *pChip)
        LOG_USER(" cpu-freq: %3.03f MHz", _tomhz(pChip->cfg.cpu_freq));
        LOG_USER("mclk-freq: %3.03f MHz", _tomhz(pChip->cfg.mclk_freq));
 
-       LOG_USER(" UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x",
+       LOG_USER(" UniqueId: 0x%08" PRIx32 " 0x%08" PRIx32 " 0x%08" PRIx32 " 0x%08" PRIx32,
                pChip->cfg.unique_id[0],
                pChip->cfg.unique_id[1],
                pChip->cfg.unique_id[2],
@@ -2856,28 +2991,6 @@ static int sam3_GetInfo(struct sam3_chip *pChip)
        return ERROR_OK;
 }
 
-static int sam3_erase_check(struct flash_bank *bank)
-{
-       int x;
-
-       LOG_DEBUG("Here");
-       if (bank->target->state != TARGET_HALTED) {
-               LOG_ERROR("Target not halted");
-               return ERROR_TARGET_NOT_HALTED;
-       }
-       if (0 == bank->num_sectors) {
-               LOG_ERROR("Target: not supported/not probed");
-               return ERROR_FAIL;
-       }
-
-       LOG_INFO("sam3 - supports auto-erase, erase_check ignored");
-       for (x = 0; x < bank->num_sectors; x++)
-               bank->sectors[x].is_erased = 1;
-
-       LOG_DEBUG("Done");
-       return ERROR_OK;
-}
-
 static int sam3_protect_check(struct flash_bank *bank)
 {
        int r;
@@ -2982,6 +3095,22 @@ FLASH_BANK_COMMAND_HANDLER(sam3_flash_bank_command)
        return ERROR_OK;
 }
 
+/**
+ * Remove all chips from the internal list without distingushing which one
+ * is owned by this bank. This simplification works only for one shot
+ * deallocation like current flash_free_all_banks()
+ */
+void sam3_free_driver_priv(struct flash_bank *bank)
+{
+       struct sam3_chip *chip = all_sam3_chips;
+       while (chip) {
+               struct sam3_chip *next = chip->next;
+               free(chip);
+               chip = next;
+       }
+       all_sam3_chips = NULL;
+}
+
 static int sam3_GetDetails(struct sam3_bank_private *pPrivate)
 {
        const struct sam3_chip_details *pDetails;
@@ -2993,7 +3122,7 @@ static int sam3_GetDetails(struct sam3_bank_private *pPrivate)
        pDetails = all_sam3_details;
        while (pDetails->name) {
                /* Compare cidr without version bits */
-               if (pDetails->chipid_cidr == (pPrivate->pChip->cfg.CHIPID_CIDR & 0xFFFFFFE0))
+               if (((pDetails->chipid_cidr ^ pPrivate->pChip->cfg.CHIPID_CIDR) & 0xFFFFFFE0) == 0)
                        break;
                else
                        pDetails++;
@@ -3002,7 +3131,7 @@ static int sam3_GetDetails(struct sam3_bank_private *pPrivate)
                LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can ID this chip?)",
                        (unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR));
                /* Help the victim, print details about the chip */
-               LOG_INFO("SAM3 CHIPID_CIDR: 0x%08x decodes as follows",
+               LOG_INFO("SAM3 CHIPID_CIDR: 0x%08" PRIx32 " decodes as follows",
                        pPrivate->pChip->cfg.CHIPID_CIDR);
                sam3_explain_chipid_cidr(pPrivate->pChip);
                return ERROR_FAIL;
@@ -3198,94 +3327,7 @@ static int sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum,
        return r;
 }
 
-/* The code below is basically this: */
-/* compiled with */
-/* arm-none-eabi-gcc -mthumb -mcpu = cortex-m3 -O9 -S ./foobar.c -o foobar.s */
-/*  */
-/* Only the *CPU* can write to the flash buffer. */
-/* the DAP cannot... so - we download this 28byte thing */
-/* Run the algorithm - (below) */
-/* to program the device */
-/*  */
-/* ======================================== */
-/* #include <stdint.h> */
-/*  */
-/* struct foo { */
-/*   uint32_t *dst; */
-/*   const uint32_t *src; */
-/*   int   n; */
-/*   volatile uint32_t *base; */
-/*   uint32_t   cmd; */
-/* }; */
-/*  */
-/*  */
-/* uint32_t sam3_function(struct foo *p) */
-/* { */
-/*   volatile uint32_t *v; */
-/*   uint32_t *d; */
-/*   const uint32_t *s; */
-/*   int   n; */
-/*   uint32_t r; */
-/*  */
-/*   d = p->dst; */
-/*   s = p->src; */
-/*   n = p->n; */
-/*  */
-/*   do { */
-/*     *d++ = *s++; */
-/*   } while (--n) */
-/*     ; */
-/*  */
-/*   v = p->base; */
-/*  */
-/*   v[ 1 ] = p->cmd; */
-/*   do { */
-/*     r = v[8/4]; */
-/*   } while (!(r&1)) */
-/*     ; */
-/*   return r; */
-/* } */
-/* ======================================== */
-
-static const uint8_t
-       sam3_page_write_opcodes[] = {
-       /*  24 0000 0446                mov     r4, r0 */
-       0x04, 0x46,
-       /*  25 0002 6168                ldr     r1, [r4, #4] */
-       0x61, 0x68,
-       /*  26 0004 0068                ldr     r0, [r0, #0] */
-       0x00, 0x68,
-       /*  27 0006 A268                ldr     r2, [r4, #8] */
-       0xa2, 0x68,
-       /*  28                          @ lr needed for prologue */
-       /*  29                  .L2: */
-       /*  30 0008 51F8043B            ldr     r3, [r1], #4 */
-       0x51, 0xf8, 0x04, 0x3b,
-       /*  31 000c 12F1FF32            adds    r2, r2, #-1 */
-       0x12, 0xf1, 0xff, 0x32,
-       /*  32 0010 40F8043B            str     r3, [r0], #4 */
-       0x40, 0xf8, 0x04, 0x3b,
-       /*  33 0014 F8D1                bne     .L2 */
-       0xf8, 0xd1,
-       /*  34 0016 E268                ldr     r2, [r4, #12] */
-       0xe2, 0x68,
-       /*  35 0018 2369                ldr     r3, [r4, #16] */
-       0x23, 0x69,
-       /*  36 001a 5360                str     r3, [r2, #4] */
-       0x53, 0x60,
-       /*  37 001c 0832                adds    r2, r2, #8 */
-       0x08, 0x32,
-       /*  38                  .L4: */
-       /*  39 001e 1068                ldr     r0, [r2, #0] */
-       0x10, 0x68,
-       /*  40 0020 10F0010F            tst     r0, #1 */
-       0x10, 0xf0, 0x01, 0x0f,
-       /*  41 0024 FBD0                beq     .L4 */
-       0xfb, 0xd0,
-       0x00, 0xBE                              /* bkpt #0 */
-};
-
-static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf)
+static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, const uint8_t *buf)
 {
        uint32_t adr;
        uint32_t status;
@@ -3344,7 +3386,7 @@ static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum,
 }
 
 static int sam3_write(struct flash_bank *bank,
-       uint8_t *buffer,
+       const uint8_t *buffer,
        uint32_t offset,
        uint32_t count)
 {
@@ -3721,6 +3763,7 @@ struct flash_driver at91sam3_flash = {
        .read = default_flash_read,
        .probe = sam3_probe,
        .auto_probe = sam3_auto_probe,
-       .erase_check = sam3_erase_check,
+       .erase_check = default_flash_blank_check,
        .protect_check = sam3_protect_check,
+       .free_driver_priv = sam3_free_driver_priv,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)