mflash: Remove this broken flash driver
[openocd.git] / src / flash / mflash.c
diff --git a/src/flash/mflash.c b/src/flash/mflash.c
deleted file mode 100644 (file)
index acf1441..0000000
+++ /dev/null
@@ -1,1450 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2007-2008 by unsik Kim <donari75@gmail.com>             *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
- ***************************************************************************/
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "mflash.h"
-#include <target/target.h>
-#include <helper/time_support.h>
-#include <helper/fileio.h>
-#include <helper/log.h>
-
-static int s3c2440_set_gpio_to_output(struct mflash_gpio_num gpio);
-static int s3c2440_set_gpio_output_val(struct mflash_gpio_num gpio, uint8_t val);
-static int pxa270_set_gpio_to_output(struct mflash_gpio_num gpio);
-static int pxa270_set_gpio_output_val(struct mflash_gpio_num gpio, uint8_t val);
-
-static struct mflash_bank *mflash_bank;
-
-static struct mflash_gpio_drv pxa270_gpio = {
-       .name = "pxa270",
-       .set_gpio_to_output = pxa270_set_gpio_to_output,
-       .set_gpio_output_val = pxa270_set_gpio_output_val
-};
-
-static struct mflash_gpio_drv s3c2440_gpio = {
-       .name = "s3c2440",
-       .set_gpio_to_output = s3c2440_set_gpio_to_output,
-       .set_gpio_output_val = s3c2440_set_gpio_output_val
-};
-
-static struct mflash_gpio_drv *mflash_gpio[] = {
-       &pxa270_gpio,
-       &s3c2440_gpio,
-       NULL
-};
-
-#define PXA270_GAFR0_L 0x40E00054
-#define PXA270_GAFR3_U 0x40E00070
-#define PXA270_GAFR3_U_RESERVED_BITS  0xfffc0000u
-#define PXA270_GPDR0 0x40E0000C
-#define PXA270_GPDR3 0x40E0010C
-#define PXA270_GPDR3_RESERVED_BITS  0xfe000000u
-#define PXA270_GPSR0 0x40E00018
-#define PXA270_GPCR0 0x40E00024
-
-static int pxa270_set_gpio_to_output(struct mflash_gpio_num gpio)
-{
-       uint32_t addr, value, mask;
-       struct target *target = mflash_bank->target;
-       int ret;
-
-       /* remove alternate function. */
-       mask = 0x3u << (gpio.num & 0xF)*2;
-
-       addr = PXA270_GAFR0_L + (gpio.num >> 4) * 4;
-
-       ret = target_read_u32(target, addr, &value);
-       if (ret != ERROR_OK)
-               return ret;
-
-       value &= ~mask;
-       if (addr == PXA270_GAFR3_U)
-               value &= ~PXA270_GAFR3_U_RESERVED_BITS;
-
-       ret = target_write_u32(target, addr, value);
-       if (ret != ERROR_OK)
-               return ret;
-
-       /* set direction to output */
-       mask = 0x1u << (gpio.num & 0x1F);
-
-       addr = PXA270_GPDR0 + (gpio.num >> 5) * 4;
-
-       ret = target_read_u32(target, addr, &value);
-       if (ret != ERROR_OK)
-               return ret;
-
-       value |= mask;
-       if (addr == PXA270_GPDR3)
-               value &= ~PXA270_GPDR3_RESERVED_BITS;
-
-       ret = target_write_u32(target, addr, value);
-       return ret;
-}
-
-static int pxa270_set_gpio_output_val(struct mflash_gpio_num gpio, uint8_t val)
-{
-       uint32_t addr, value, mask;
-       struct target *target = mflash_bank->target;
-       int ret;
-
-       mask = 0x1u << (gpio.num & 0x1F);
-
-       if (val)
-               addr = PXA270_GPSR0 + (gpio.num >> 5) * 4;
-       else
-               addr = PXA270_GPCR0 + (gpio.num >> 5) * 4;
-
-       ret = target_read_u32(target, addr, &value);
-       if (ret != ERROR_OK)
-               return ret;
-
-       value |= mask;
-
-       ret = target_write_u32(target, addr, value);
-
-       return ret;
-}
-
-#define S3C2440_GPACON 0x56000000
-#define S3C2440_GPADAT 0x56000004
-#define S3C2440_GPJCON 0x560000d0
-#define S3C2440_GPJDAT 0x560000d4
-
-static int s3c2440_set_gpio_to_output(struct mflash_gpio_num gpio)
-{
-       uint32_t data, mask, gpio_con;
-       struct target *target = mflash_bank->target;
-       int ret;
-
-       if (gpio.port[0] >= 'a' && gpio.port[0] <= 'h')
-               gpio_con = S3C2440_GPACON + (gpio.port[0] - 'a') * 0x10;
-       else if (gpio.port[0] == 'j')
-               gpio_con = S3C2440_GPJCON;
-       else {
-               LOG_ERROR("mflash: invalid port %d%s", gpio.num, gpio.port);
-               return ERROR_COMMAND_SYNTAX_ERROR;
-       }
-
-       ret = target_read_u32(target, gpio_con, &data);
-
-       if (ret == ERROR_OK) {
-               if (gpio.port[0] == 'a') {
-                       mask = 1 << gpio.num;
-                       data &= ~mask;
-               } else {
-                       mask = 3 << gpio.num * 2;
-                       data &= ~mask;
-                       data |= (1 << gpio.num * 2);
-               }
-
-               ret = target_write_u32(target, gpio_con, data);
-       }
-       return ret;
-}
-
-static int s3c2440_set_gpio_output_val(struct mflash_gpio_num gpio, uint8_t val)
-{
-       uint32_t data, mask, gpio_dat;
-       struct target *target = mflash_bank->target;
-       int ret;
-
-       if (gpio.port[0] >= 'a' && gpio.port[0] <= 'h')
-               gpio_dat = S3C2440_GPADAT + (gpio.port[0] - 'a') * 0x10;
-       else if (gpio.port[0] == 'j')
-               gpio_dat = S3C2440_GPJDAT;
-       else {
-               LOG_ERROR("mflash: invalid port %d%s", gpio.num, gpio.port);
-               return ERROR_COMMAND_SYNTAX_ERROR;
-       }
-
-       ret = target_read_u32(target, gpio_dat, &data);
-
-       if (ret == ERROR_OK) {
-               mask = 1 << gpio.num;
-               if (val)
-                       data |= mask;
-               else
-                       data &= ~mask;
-
-               ret = target_write_u32(target, gpio_dat, data);
-       }
-       return ret;
-}
-
-static int mg_hdrst(uint8_t level)
-{
-       return mflash_bank->gpio_drv->set_gpio_output_val(mflash_bank->rst_pin, level);
-}
-
-static int mg_init_gpio(void)
-{
-       int ret;
-       struct mflash_gpio_drv *gpio_drv = mflash_bank->gpio_drv;
-
-       ret = gpio_drv->set_gpio_to_output(mflash_bank->rst_pin);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = gpio_drv->set_gpio_output_val(mflash_bank->rst_pin, 1);
-
-       return ret;
-}
-
-static int mg_dsk_wait(mg_io_type_wait wait_local, uint32_t time_var)
-{
-       uint8_t status, error;
-       struct target *target = mflash_bank->target;
-       uint32_t mg_task_reg = mflash_bank->base + MG_REG_OFFSET;
-       int ret;
-       long long t = 0;
-
-       struct duration bench;
-       duration_start(&bench);
-
-       while (time_var) {
-
-               ret = target_read_u8(target, mg_task_reg + MG_REG_STATUS, &status);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               if (status & mg_io_rbit_status_busy) {
-                       if (wait_local == mg_io_wait_bsy)
-                               return ERROR_OK;
-               } else {
-                       switch (wait_local) {
-                               case mg_io_wait_not_bsy:
-                                       return ERROR_OK;
-                               case mg_io_wait_rdy_noerr:
-                                       if (status & mg_io_rbit_status_ready)
-                                               return ERROR_OK;
-                                       break;
-                               case mg_io_wait_drq_noerr:
-                                       if (status & mg_io_rbit_status_data_req)
-                                               return ERROR_OK;
-                                       break;
-                               default:
-                                       break;
-                       }
-
-                       /* Now we check the error condition! */
-                       if (status & mg_io_rbit_status_error) {
-                               ret = target_read_u8(target, mg_task_reg + MG_REG_ERROR, &error);
-                               if (ret != ERROR_OK)
-                                       return ret;
-
-                               LOG_ERROR("mflash: io error 0x%02x", error);
-
-                               return ERROR_MG_IO;
-                       }
-
-                       switch (wait_local) {
-                               case mg_io_wait_rdy:
-                                       if (status & mg_io_rbit_status_ready)
-                                               return ERROR_OK;
-                                       /* fallthrough */
-                               case mg_io_wait_drq:
-                                       if (status & mg_io_rbit_status_data_req)
-                                               return ERROR_OK;
-                                       /* fallthrough */
-                               default:
-                                       break;
-                       }
-               }
-
-               ret = duration_measure(&bench);
-               if (ERROR_OK == ret)
-                       t = duration_elapsed(&bench) * 1000.0;
-               else
-                       LOG_ERROR("mflash: duration measurement failed: %d", ret);
-
-               if (t > time_var)
-                       break;
-       }
-
-       LOG_ERROR("mflash: timeout occured");
-       return ERROR_MG_TIMEOUT;
-}
-
-static int mg_dsk_srst(uint8_t on)
-{
-       struct target *target = mflash_bank->target;
-       uint32_t mg_task_reg = mflash_bank->base + MG_REG_OFFSET;
-       uint8_t value;
-       int ret;
-
-       ret = target_read_u8(target, mg_task_reg + MG_REG_DRV_CTRL, &value);
-       if (ret != ERROR_OK)
-               return ret;
-
-       if (on)
-               value |= (mg_io_rbit_devc_srst);
-       else
-               value &= ~mg_io_rbit_devc_srst;
-
-       ret = target_write_u8(target, mg_task_reg + MG_REG_DRV_CTRL, value);
-       return ret;
-}
-
-static int mg_dsk_io_cmd(uint32_t sect_num, uint32_t cnt, uint8_t cmd)
-{
-       struct target *target = mflash_bank->target;
-       uint32_t mg_task_reg = mflash_bank->base + MG_REG_OFFSET;
-       uint8_t value;
-       int ret;
-
-       ret = mg_dsk_wait(mg_io_wait_rdy_noerr, MG_OEM_DISK_WAIT_TIME_NORMAL);
-       if (ret != ERROR_OK)
-               return ret;
-
-       value = mg_io_rval_dev_drv_master | mg_io_rval_dev_lba_mode | ((sect_num >> 24) & 0xf);
-
-       ret = target_write_u8(target, mg_task_reg + MG_REG_DRV_HEAD, value);
-       ret |= target_write_u8(target, mg_task_reg + MG_REG_SECT_CNT, (uint8_t)cnt);
-       ret |= target_write_u8(target, mg_task_reg + MG_REG_SECT_NUM, (uint8_t)sect_num);
-       ret |= target_write_u8(target, mg_task_reg + MG_REG_CYL_LOW, (uint8_t)(sect_num >> 8));
-       ret |= target_write_u8(target, mg_task_reg + MG_REG_CYL_HIGH, (uint8_t)(sect_num >> 16));
-
-       if (ret != ERROR_OK)
-               return ret;
-
-       return target_write_u8(target, mg_task_reg + MG_REG_COMMAND, cmd);
-}
-
-static int mg_dsk_drv_info(void)
-{
-       struct target *target = mflash_bank->target;
-       uint32_t mg_buff = mflash_bank->base + MG_BUFFER_OFFSET;
-       int ret;
-
-       ret = mg_dsk_io_cmd(0, 1, mg_io_cmd_identify);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_wait(mg_io_wait_drq, MG_OEM_DISK_WAIT_TIME_NORMAL);
-       if (ret != ERROR_OK)
-               return ret;
-
-       LOG_INFO("mflash: read drive info");
-
-       if (!mflash_bank->drv_info)
-               mflash_bank->drv_info = malloc(sizeof(struct mg_drv_info));
-
-       ret = target_read_memory(target, mg_buff, 2,
-                       sizeof(mg_io_type_drv_info) >> 1,
-                       (uint8_t *)&mflash_bank->drv_info->drv_id);
-       if (ret != ERROR_OK)
-               return ret;
-
-       mflash_bank->drv_info->tot_sects =
-               (uint32_t)(mflash_bank->drv_info->drv_id.total_user_addressable_sectors_hi << 16)
-               + mflash_bank->drv_info->drv_id.total_user_addressable_sectors_lo;
-
-       return target_write_u8(target,
-               mflash_bank->base + MG_REG_OFFSET + MG_REG_COMMAND,
-               mg_io_cmd_confirm_read);
-}
-
-static int mg_mflash_rst(void)
-{
-       int ret;
-
-       ret = mg_init_gpio();
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_hdrst(0);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_wait(mg_io_wait_bsy, MG_OEM_DISK_WAIT_TIME_LONG);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_hdrst(1);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_wait(mg_io_wait_not_bsy, MG_OEM_DISK_WAIT_TIME_LONG);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_srst(1);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_wait(mg_io_wait_bsy, MG_OEM_DISK_WAIT_TIME_LONG);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_srst(0);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_dsk_wait(mg_io_wait_not_bsy, MG_OEM_DISK_WAIT_TIME_LONG);
-       if (ret != ERROR_OK)
-               return ret;
-
-       LOG_INFO("mflash: reset ok");
-
-       return ERROR_OK;
-}
-
-static int mg_mflash_probe(void)
-{
-       int ret = mg_mflash_rst();
-       if (ret != ERROR_OK)
-               return ret;
-
-       return mg_dsk_drv_info();
-}
-
-COMMAND_HANDLER(mg_probe_cmd)
-{
-       int ret;
-
-       ret = mg_mflash_probe();
-
-       if (ret == ERROR_OK) {
-               command_print(CMD,
-                       "mflash (total %" PRIu32 " sectors) found at 0x%8.8" PRIx32 "",
-                       mflash_bank->drv_info->tot_sects,
-                       mflash_bank->base);
-       }
-
-       return ret;
-}
-
-static int mg_mflash_do_read_sects(void *buff, uint32_t sect_num, uint32_t sect_cnt)
-{
-       uint32_t i, address;
-       int ret;
-       struct target *target = mflash_bank->target;
-       uint8_t *buff_ptr = buff;
-
-       ret = mg_dsk_io_cmd(sect_num, sect_cnt, mg_io_cmd_read);
-       if (ret != ERROR_OK)
-               return ret;
-
-       address = mflash_bank->base + MG_BUFFER_OFFSET;
-
-       struct duration bench;
-       duration_start(&bench);
-
-       for (i = 0; i < sect_cnt; i++) {
-               ret = mg_dsk_wait(mg_io_wait_drq, MG_OEM_DISK_WAIT_TIME_NORMAL);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               ret = target_read_memory(target, address, 2, MG_MFLASH_SECTOR_SIZE / 2, buff_ptr);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               buff_ptr += MG_MFLASH_SECTOR_SIZE;
-
-               ret = target_write_u8(target,
-                               mflash_bank->base + MG_REG_OFFSET + MG_REG_COMMAND,
-                               mg_io_cmd_confirm_read);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               LOG_DEBUG("mflash: %" PRIu32 " (0x%8.8" PRIx32 ") sector read", sect_num + i,
-                       (sect_num + i) * MG_MFLASH_SECTOR_SIZE);
-
-               ret = duration_measure(&bench);
-               if ((ERROR_OK == ret) && (duration_elapsed(&bench) > 3)) {
-                       LOG_INFO("mflash: read %" PRIu32 "'th sectors", sect_num + i);
-                       duration_start(&bench);
-               }
-       }
-
-       return mg_dsk_wait(mg_io_wait_rdy, MG_OEM_DISK_WAIT_TIME_NORMAL);
-}
-
-static int mg_mflash_read_sects(void *buff, uint32_t sect_num, uint32_t sect_cnt)
-{
-       uint32_t quotient, residue, i;
-       uint8_t *buff_ptr = buff;
-       int ret = ERROR_OK;
-
-       quotient = sect_cnt >> 8;
-       residue = sect_cnt % 256;
-
-       for (i = 0; i < quotient; i++) {
-               LOG_DEBUG("mflash: sect num : %" PRIu32 " buff : %p",
-                       sect_num, buff_ptr);
-               ret = mg_mflash_do_read_sects(buff_ptr, sect_num, 256);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               sect_num += 256;
-               buff_ptr += 256 * MG_MFLASH_SECTOR_SIZE;
-       }
-
-       if (residue) {
-               LOG_DEBUG("mflash: sect num : %" PRIx32 " buff : %p",
-                       sect_num, buff_ptr);
-               return mg_mflash_do_read_sects(buff_ptr, sect_num, residue);
-       }
-
-       return ret;
-}
-
-static int mg_mflash_do_write_sects(void *buff, uint32_t sect_num, uint32_t sect_cnt,
-       uint8_t cmd)
-{
-       uint32_t i, address;
-       int ret;
-       struct target *target = mflash_bank->target;
-       uint8_t *buff_ptr = buff;
-
-       ret = mg_dsk_io_cmd(sect_num, sect_cnt, cmd);
-       if (ret != ERROR_OK)
-               return ret;
-
-       address = mflash_bank->base + MG_BUFFER_OFFSET;
-
-       struct duration bench;
-       duration_start(&bench);
-
-       for (i = 0; i < sect_cnt; i++) {
-               ret = mg_dsk_wait(mg_io_wait_drq, MG_OEM_DISK_WAIT_TIME_NORMAL);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               ret = target_write_memory(target, address, 2, MG_MFLASH_SECTOR_SIZE / 2, buff_ptr);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               buff_ptr += MG_MFLASH_SECTOR_SIZE;
-
-               ret = target_write_u8(target,
-                               mflash_bank->base + MG_REG_OFFSET + MG_REG_COMMAND,
-                               mg_io_cmd_confirm_write);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               LOG_DEBUG("mflash: %" PRIu32 " (0x%8.8" PRIx32 ") sector write", sect_num + i,
-                       (sect_num + i) * MG_MFLASH_SECTOR_SIZE);
-
-               ret = duration_measure(&bench);
-               if ((ERROR_OK == ret) && (duration_elapsed(&bench) > 3)) {
-                       LOG_INFO("mflash: wrote %" PRIu32 "'th sectors", sect_num + i);
-                       duration_start(&bench);
-               }
-       }
-
-       if (cmd == mg_io_cmd_write)
-               ret = mg_dsk_wait(mg_io_wait_rdy, MG_OEM_DISK_WAIT_TIME_NORMAL);
-       else
-               ret = mg_dsk_wait(mg_io_wait_rdy, MG_OEM_DISK_WAIT_TIME_LONG);
-
-       return ret;
-}
-
-static int mg_mflash_write_sects(void *buff, uint32_t sect_num, uint32_t sect_cnt)
-{
-       uint32_t quotient, residue, i;
-       uint8_t *buff_ptr = buff;
-       int ret = ERROR_OK;
-
-       quotient = sect_cnt >> 8;
-       residue = sect_cnt % 256;
-
-       for (i = 0; i < quotient; i++) {
-               LOG_DEBUG("mflash: sect num : %" PRIu32 "buff : %p", sect_num,
-                       buff_ptr);
-               ret = mg_mflash_do_write_sects(buff_ptr, sect_num, 256, mg_io_cmd_write);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               sect_num += 256;
-               buff_ptr += 256 * MG_MFLASH_SECTOR_SIZE;
-       }
-
-       if (residue) {
-               LOG_DEBUG("mflash: sect num : %" PRIu32 " buff : %p", sect_num,
-                       buff_ptr);
-               return mg_mflash_do_write_sects(buff_ptr, sect_num, residue, mg_io_cmd_write);
-       }
-
-       return ret;
-}
-
-static int mg_mflash_read(uint32_t addr, uint8_t *buff, uint32_t len)
-{
-       uint8_t *buff_ptr = buff;
-       uint8_t sect_buff[MG_MFLASH_SECTOR_SIZE];
-       uint32_t cur_addr, next_sec_addr, end_addr, cnt, sect_num;
-       int ret = ERROR_OK;
-
-       cnt = 0;
-       cur_addr = addr;
-       end_addr = addr + len;
-
-       if (cur_addr & MG_MFLASH_SECTOR_SIZE_MASK) {
-
-               next_sec_addr = (cur_addr + MG_MFLASH_SECTOR_SIZE) & ~MG_MFLASH_SECTOR_SIZE_MASK;
-               sect_num = cur_addr >> MG_MFLASH_SECTOR_SIZE_SHIFT;
-               ret = mg_mflash_read_sects(sect_buff, sect_num, 1);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               if (end_addr < next_sec_addr) {
-                       memcpy(buff_ptr,
-                               sect_buff + (cur_addr & MG_MFLASH_SECTOR_SIZE_MASK),
-                               end_addr - cur_addr);
-                       LOG_DEBUG(
-                               "mflash: copies %" PRIu32 " byte from sector offset 0x%8.8" PRIx32 "",
-                               end_addr - cur_addr,
-                               cur_addr);
-                       cur_addr = end_addr;
-               } else {
-                       memcpy(buff_ptr,
-                               sect_buff + (cur_addr & MG_MFLASH_SECTOR_SIZE_MASK),
-                               next_sec_addr - cur_addr);
-                       LOG_DEBUG(
-                               "mflash: copies %" PRIu32 " byte from sector offset 0x%8.8" PRIx32 "",
-                               next_sec_addr - cur_addr,
-                               cur_addr);
-                       buff_ptr += (next_sec_addr - cur_addr);
-                       cur_addr = next_sec_addr;
-               }
-       }
-
-       if (cur_addr < end_addr) {
-
-               sect_num = cur_addr >> MG_MFLASH_SECTOR_SIZE_SHIFT;
-               next_sec_addr = cur_addr + MG_MFLASH_SECTOR_SIZE;
-
-               while (next_sec_addr <= end_addr) {
-                       cnt++;
-                       next_sec_addr += MG_MFLASH_SECTOR_SIZE;
-               }
-
-               if (cnt) {
-                       ret = mg_mflash_read_sects(buff_ptr, sect_num, cnt);
-                       if (ret != ERROR_OK)
-                               return ret;
-               }
-
-               buff_ptr += cnt * MG_MFLASH_SECTOR_SIZE;
-               cur_addr += cnt * MG_MFLASH_SECTOR_SIZE;
-
-               if (cur_addr < end_addr) {
-
-                       sect_num = cur_addr >> MG_MFLASH_SECTOR_SIZE_SHIFT;
-                       ret = mg_mflash_read_sects(sect_buff, sect_num, 1);
-                       if (ret != ERROR_OK)
-                               return ret;
-
-                       memcpy(buff_ptr, sect_buff, end_addr - cur_addr);
-                       LOG_DEBUG("mflash: copies %u byte", (unsigned)(end_addr - cur_addr));
-               }
-       }
-
-       return ret;
-}
-
-static int mg_mflash_write(uint32_t addr, uint8_t *buff, uint32_t len)
-{
-       uint8_t *buff_ptr = buff;
-       uint8_t sect_buff[MG_MFLASH_SECTOR_SIZE];
-       uint32_t cur_addr, next_sec_addr, end_addr, cnt, sect_num;
-       int ret = ERROR_OK;
-
-       cnt = 0;
-       cur_addr = addr;
-       end_addr = addr + len;
-
-       if (cur_addr & MG_MFLASH_SECTOR_SIZE_MASK) {
-
-               next_sec_addr = (cur_addr + MG_MFLASH_SECTOR_SIZE) & ~MG_MFLASH_SECTOR_SIZE_MASK;
-               sect_num = cur_addr >> MG_MFLASH_SECTOR_SIZE_SHIFT;
-               ret = mg_mflash_read_sects(sect_buff, sect_num, 1);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               if (end_addr < next_sec_addr) {
-                       memcpy(sect_buff + (cur_addr & MG_MFLASH_SECTOR_SIZE_MASK),
-                               buff_ptr,
-                               end_addr - cur_addr);
-                       LOG_DEBUG(
-                               "mflash: copies %" PRIu32 " byte to sector offset 0x%8.8" PRIx32 "",
-                               end_addr - cur_addr,
-                               cur_addr);
-                       cur_addr = end_addr;
-               } else {
-                       memcpy(sect_buff + (cur_addr & MG_MFLASH_SECTOR_SIZE_MASK),
-                               buff_ptr,
-                               next_sec_addr - cur_addr);
-                       LOG_DEBUG(
-                               "mflash: copies %" PRIu32 " byte to sector offset 0x%8.8" PRIx32 "",
-                               next_sec_addr - cur_addr,
-                               cur_addr);
-                       buff_ptr += (next_sec_addr - cur_addr);
-                       cur_addr = next_sec_addr;
-               }
-
-               ret = mg_mflash_write_sects(sect_buff, sect_num, 1);
-               if (ret != ERROR_OK)
-                       return ret;
-       }
-
-       if (cur_addr < end_addr) {
-
-               sect_num = cur_addr >> MG_MFLASH_SECTOR_SIZE_SHIFT;
-               next_sec_addr = cur_addr + MG_MFLASH_SECTOR_SIZE;
-
-               while (next_sec_addr <= end_addr) {
-                       cnt++;
-                       next_sec_addr += MG_MFLASH_SECTOR_SIZE;
-               }
-
-               if (cnt) {
-                       ret = mg_mflash_write_sects(buff_ptr, sect_num, cnt);
-                       if (ret != ERROR_OK)
-                               return ret;
-               }
-
-               buff_ptr += cnt * MG_MFLASH_SECTOR_SIZE;
-               cur_addr += cnt * MG_MFLASH_SECTOR_SIZE;
-
-               if (cur_addr < end_addr) {
-
-                       sect_num = cur_addr >> MG_MFLASH_SECTOR_SIZE_SHIFT;
-                       ret = mg_mflash_read_sects(sect_buff, sect_num, 1);
-                       if (ret != ERROR_OK)
-                               return ret;
-
-                       memcpy(sect_buff, buff_ptr, end_addr - cur_addr);
-                       LOG_DEBUG("mflash: copies %" PRIu32 " byte", end_addr - cur_addr);
-                       ret = mg_mflash_write_sects(sect_buff, sect_num, 1);
-               }
-       }
-
-       return ret;
-}
-
-COMMAND_HANDLER(mg_write_cmd)
-{
-       uint32_t address, cnt, res, i;
-       uint8_t *buffer;
-       struct fileio *fileio;
-       int ret;
-
-       if (CMD_ARGC != 3)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], address);
-
-       ret = fileio_open(&fileio, CMD_ARGV[1], FILEIO_READ, FILEIO_BINARY);
-       if (ret != ERROR_OK)
-               return ret;
-
-       size_t filesize;
-       buffer = malloc(MG_FILEIO_CHUNK);
-       if (!buffer) {
-               fileio_close(fileio);
-               return ERROR_FAIL;
-       }
-       int retval = fileio_size(fileio, &filesize);
-       if (retval != ERROR_OK) {
-               fileio_close(fileio);
-               free(buffer);
-               return retval;
-       }
-
-       cnt = filesize / MG_FILEIO_CHUNK;
-       res = filesize % MG_FILEIO_CHUNK;
-
-       struct duration bench;
-       duration_start(&bench);
-
-       size_t buf_cnt;
-       for (i = 0; i < cnt; i++) {
-               ret = fileio_read(fileio, MG_FILEIO_CHUNK, buffer, &buf_cnt);
-               if (ret != ERROR_OK)
-                       goto mg_write_cmd_err;
-               ret = mg_mflash_write(address, buffer, MG_FILEIO_CHUNK);
-               if (ret != ERROR_OK)
-                       goto mg_write_cmd_err;
-               address += MG_FILEIO_CHUNK;
-       }
-
-       if (res) {
-               ret = fileio_read(fileio, res, buffer, &buf_cnt);
-               if (ret != ERROR_OK)
-                       goto mg_write_cmd_err;
-               ret = mg_mflash_write(address, buffer, res);
-               if (ret != ERROR_OK)
-                       goto mg_write_cmd_err;
-       }
-
-       if (duration_measure(&bench) == ERROR_OK) {
-               command_print(CMD, "wrote %zu bytes from file %s "
-                       "in %fs (%0.3f kB/s)", filesize, CMD_ARGV[1],
-                       duration_elapsed(&bench), duration_kbps(&bench, filesize));
-       }
-
-       free(buffer);
-       fileio_close(fileio);
-
-       return ERROR_OK;
-
-mg_write_cmd_err:
-       free(buffer);
-       fileio_close(fileio);
-
-       return ret;
-}
-
-COMMAND_HANDLER(mg_dump_cmd)
-{
-       uint32_t address, size, cnt, res, i;
-       uint8_t *buffer;
-       struct fileio *fileio;
-       int ret;
-
-       if (CMD_ARGC != 4)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], address);
-       COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], size);
-
-       ret = fileio_open(&fileio, CMD_ARGV[1], FILEIO_WRITE, FILEIO_BINARY);
-       if (ret != ERROR_OK)
-               return ret;
-
-       buffer = malloc(MG_FILEIO_CHUNK);
-       if (!buffer) {
-               fileio_close(fileio);
-               return ERROR_FAIL;
-       }
-
-       cnt = size / MG_FILEIO_CHUNK;
-       res = size % MG_FILEIO_CHUNK;
-
-       struct duration bench;
-       duration_start(&bench);
-
-       size_t size_written;
-       for (i = 0; i < cnt; i++) {
-               ret = mg_mflash_read(address, buffer, MG_FILEIO_CHUNK);
-               if (ret != ERROR_OK)
-                       goto mg_dump_cmd_err;
-               ret = fileio_write(fileio, MG_FILEIO_CHUNK, buffer, &size_written);
-               if (ret != ERROR_OK)
-                       goto mg_dump_cmd_err;
-               address += MG_FILEIO_CHUNK;
-       }
-
-       if (res) {
-               ret = mg_mflash_read(address, buffer, res);
-               if (ret != ERROR_OK)
-                       goto mg_dump_cmd_err;
-               ret = fileio_write(fileio, res, buffer, &size_written);
-               if (ret != ERROR_OK)
-                       goto mg_dump_cmd_err;
-       }
-
-       if (duration_measure(&bench) == ERROR_OK) {
-               command_print(CMD, "dump image (address 0x%8.8" PRIx32 " "
-                       "size %" PRIu32 ") to file %s in %fs (%0.3f kB/s)",
-                       address, size, CMD_ARGV[1],
-                       duration_elapsed(&bench), duration_kbps(&bench, size));
-       }
-
-       free(buffer);
-       fileio_close(fileio);
-
-       return ERROR_OK;
-
-mg_dump_cmd_err:
-       free(buffer);
-       fileio_close(fileio);
-
-       return ret;
-}
-
-static int mg_set_feature(mg_feature_id feature, mg_feature_val config)
-{
-       struct target *target = mflash_bank->target;
-       uint32_t mg_task_reg = mflash_bank->base + MG_REG_OFFSET;
-       int ret;
-
-       ret = mg_dsk_wait(mg_io_wait_rdy_noerr, MG_OEM_DISK_WAIT_TIME_NORMAL);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = target_write_u8(target, mg_task_reg + MG_REG_FEATURE, feature);
-       ret |= target_write_u8(target, mg_task_reg + MG_REG_SECT_CNT, config);
-       ret |= target_write_u8(target, mg_task_reg + MG_REG_COMMAND,
-                       mg_io_cmd_set_feature);
-
-       return ret;
-}
-
-static int mg_is_valid_pll(double XIN, int N, double CLK_OUT, int NO)
-{
-       double v1 = XIN / N;
-       double v2 = CLK_OUT * NO;
-
-       if (v1 < 1000000 || v1 > 15000000 || v2 < 100000000 || v2 > 500000000)
-               return ERROR_MG_INVALID_PLL;
-
-       return ERROR_OK;
-}
-
-static int mg_pll_get_M(unsigned short feedback_div)
-{
-       int i, M;
-
-       for (i = 1, M = 0; i < 512; i <<= 1, feedback_div >>= 1)
-               M += (feedback_div & 1) * i;
-
-       return M + 2;
-}
-
-static int mg_pll_get_N(unsigned char input_div)
-{
-       int i, N;
-
-       for (i = 1, N = 0; i < 32; i <<= 1, input_div >>= 1)
-               N += (input_div & 1) * i;
-
-       return N + 2;
-}
-
-static int mg_pll_get_NO(unsigned char output_div)
-{
-       int i, NO;
-
-       for (i = 0, NO = 1; i < 2; ++i, output_div >>= 1)
-               if (output_div & 1)
-                       NO = NO << 1;
-
-       return NO;
-}
-
-static double mg_do_calc_pll(double XIN, mg_pll_t *p_pll_val, int is_approximate)
-{
-       unsigned short i;
-       unsigned char j, k;
-       int M, N, NO;
-       double CLK_OUT;
-       double DIV = 1;
-       double ROUND = 0;
-
-       if (is_approximate) {
-               DIV   = 1000000;
-               ROUND = 500000;
-       }
-
-       for (i = 0; i < MG_PLL_MAX_FEEDBACKDIV_VAL; ++i) {
-               M  = mg_pll_get_M(i);
-
-               for (j = 0; j < MG_PLL_MAX_INPUTDIV_VAL; ++j) {
-                       N  = mg_pll_get_N(j);
-
-                       for (k = 0; k < MG_PLL_MAX_OUTPUTDIV_VAL; ++k) {
-                               NO = mg_pll_get_NO(k);
-
-                               CLK_OUT = XIN * ((double)M / N) / NO;
-
-                               if ((int)((CLK_OUT + ROUND) / DIV)
-                                   == (int)(MG_PLL_CLK_OUT / DIV)) {
-                                       if (mg_is_valid_pll(XIN, N, CLK_OUT, NO) == ERROR_OK) {
-                                               p_pll_val->lock_cyc =
-                                                       (int)(XIN * MG_PLL_STD_LOCKCYCLE /
-                                                             MG_PLL_STD_INPUTCLK);
-                                               p_pll_val->feedback_div = i;
-                                               p_pll_val->input_div = j;
-                                               p_pll_val->output_div = k;
-
-                                               return CLK_OUT;
-                                       }
-                               }
-                       }
-               }
-       }
-
-       return 0;
-}
-
-static double mg_calc_pll(double XIN, mg_pll_t *p_pll_val)
-{
-       double CLK_OUT;
-
-       CLK_OUT = mg_do_calc_pll(XIN, p_pll_val, 0);
-
-       if (!CLK_OUT)
-               return mg_do_calc_pll(XIN, p_pll_val, 1);
-       else
-               return CLK_OUT;
-}
-
-static int mg_verify_interface(void)
-{
-       uint16_t buff[MG_MFLASH_SECTOR_SIZE >> 1];
-       uint16_t i, j;
-       uint32_t address = mflash_bank->base + MG_BUFFER_OFFSET;
-       struct target *target = mflash_bank->target;
-       int ret;
-
-       for (j = 0; j < 10; j++) {
-               for (i = 0; i < MG_MFLASH_SECTOR_SIZE >> 1; i++)
-                       buff[i] = i;
-
-               ret = target_write_memory(target, address, 2,
-                               MG_MFLASH_SECTOR_SIZE / 2, (uint8_t *)buff);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               memset(buff, 0xff, MG_MFLASH_SECTOR_SIZE);
-
-               ret = target_read_memory(target, address, 2,
-                               MG_MFLASH_SECTOR_SIZE / 2, (uint8_t *)buff);
-               if (ret != ERROR_OK)
-                       return ret;
-
-               for (i = 0; i < MG_MFLASH_SECTOR_SIZE >> 1; i++) {
-                       if (buff[i] != i) {
-                               LOG_ERROR("mflash: verify interface fail");
-                               return ERROR_MG_INTERFACE;
-                       }
-               }
-       }
-
-       LOG_INFO("mflash: verify interface ok");
-       return ret;
-}
-
-static const char g_strSEG_SerialNum[20] = {
-       'G', 'm', 'n', 'i', '-', 'e', 'e', 'S', 'g', 'a', 'e', 'l',
-       0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20
-};
-
-static const char g_strSEG_FWRev[8] = {
-       'F', 'X', 'L', 'T', '2', 'v', '0', '.'
-};
-
-static const char g_strSEG_ModelNum[40] = {
-       'F', 'X', 'A', 'L', 'H', 'S', '2', 0x20, '0', '0', 's', '7',
-       0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
-       0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
-       0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20
-};
-
-static void mg_gen_ataid(mg_io_type_drv_info *pSegIdDrvInfo)
-{
-       /* b15 is ATA device(0) , b7 is Removable Media Device */
-       pSegIdDrvInfo->general_configuration            = 0x045A;
-       /* 128MB :   Cylinder=> 977 , Heads=> 8 ,  Sectors=> 32
-        * 256MB :   Cylinder=> 980 , Heads=> 16 , Sectors=> 32
-        * 384MB :   Cylinder=> 745 , Heads=> 16 , Sectors=> 63
-        */
-       pSegIdDrvInfo->number_of_cylinders              = 0x02E9;
-       pSegIdDrvInfo->reserved1                        = 0x0;
-       pSegIdDrvInfo->number_of_heads                  = 0x10;
-       pSegIdDrvInfo->unformatted_bytes_per_track      = 0x0;
-       pSegIdDrvInfo->unformatted_bytes_per_sector     = 0x0;
-       pSegIdDrvInfo->sectors_per_track                = 0x3F;
-       pSegIdDrvInfo->vendor_unique1[0]                = 0x000B;
-       pSegIdDrvInfo->vendor_unique1[1]                = 0x7570;
-       pSegIdDrvInfo->vendor_unique1[2]                = 0x8888;
-
-       memcpy(pSegIdDrvInfo->serial_number, g_strSEG_SerialNum, 20);
-       /* 0x2 : dual buffer */
-       pSegIdDrvInfo->buffer_type                      = 0x2;
-       /* buffer size : 2KB */
-       pSegIdDrvInfo->buffer_sector_size               = 0x800;
-       pSegIdDrvInfo->number_of_ecc_bytes              = 0;
-
-       memcpy(pSegIdDrvInfo->firmware_revision, g_strSEG_FWRev, 8);
-
-       memcpy(pSegIdDrvInfo->model_number, g_strSEG_ModelNum, 40);
-
-       pSegIdDrvInfo->maximum_block_transfer           = 0x4;
-       pSegIdDrvInfo->vendor_unique2                   = 0x0;
-       pSegIdDrvInfo->dword_io                         = 0x00;
-       /* b11 : IORDY support(PIO Mode 4), b10 : Disable/Enbale IORDY
-        * b9  : LBA support, b8 : DMA mode support
-        */
-       pSegIdDrvInfo->capabilities                     = 0x1 << 9;
-
-       pSegIdDrvInfo->reserved2                        = 0x4000;
-       pSegIdDrvInfo->vendor_unique3                   = 0x00;
-       /* PIOMode-2 support */
-       pSegIdDrvInfo->pio_cycle_timing_mode            = 0x02;
-       pSegIdDrvInfo->vendor_unique4                   = 0x00;
-       /* MultiWord-2 support */
-       pSegIdDrvInfo->dma_cycle_timing_mode            = 0x00;
-       /* b1 : word64~70 is valid
-        * b0 : word54~58 are valid and reflect the current numofcyls,heads,sectors
-        * b2 : If device supports Ultra DMA , set to one to vaildate word88
-        */
-       pSegIdDrvInfo->translation_fields_valid         = (0x1 << 1) | (0x1 << 0);
-       pSegIdDrvInfo->number_of_current_cylinders      = 0x02E9;
-       pSegIdDrvInfo->number_of_current_heads          = 0x10;
-       pSegIdDrvInfo->current_sectors_per_track        = 0x3F;
-       pSegIdDrvInfo->current_sector_capacity_lo       = 0x7570;
-       pSegIdDrvInfo->current_sector_capacity_hi       = 0x000B;
-
-       pSegIdDrvInfo->multi_sector_count                       = 0x04;
-       /* b8 : Multiple secotr setting valid , b[7:0] num of secotrs per block */
-       pSegIdDrvInfo->multi_sector_setting_valid               = 0x01;
-       pSegIdDrvInfo->total_user_addressable_sectors_lo        = 0x7570;
-       pSegIdDrvInfo->total_user_addressable_sectors_hi        = 0x000B;
-       pSegIdDrvInfo->single_dma_modes_supported               = 0x00;
-       pSegIdDrvInfo->single_dma_transfer_active               = 0x00;
-       /* b2 :Multi-word DMA mode 2, b1 : Multi-word DMA mode 1 */
-       pSegIdDrvInfo->multi_dma_modes_supported                = (0x1 << 0);
-       /* b2 :Multi-word DMA mode 2, b1 : Multi-word DMA mode 1 */
-       pSegIdDrvInfo->multi_dma_transfer_active                = (0x1 << 0);
-       /* b0 : PIO Mode-3 support, b1 : PIO Mode-4 support */
-       pSegIdDrvInfo->adv_pio_mode                             = 0x00;
-       /* 480(0x1E0)nsec for Multi-word DMA mode0
-        * 150(0x96) nsec for Multi-word DMA mode1
-        * 120(0x78) nsec for Multi-word DMA mode2
-        */
-       pSegIdDrvInfo->min_dma_cyc                      = 0x1E0;
-       pSegIdDrvInfo->recommend_dma_cyc                = 0x1E0;
-       pSegIdDrvInfo->min_pio_cyc_no_iordy             = 0x1E0;
-       pSegIdDrvInfo->min_pio_cyc_with_iordy           = 0x1E0;
-       memset(pSegIdDrvInfo->reserved3, 0x00, 22);
-       /* b7 : ATA/ATAPI-7 ,b6 : ATA/ATAPI-6 ,b5 : ATA/ATAPI-5,b4 : ATA/ATAPI-4 */
-       pSegIdDrvInfo->major_ver_num                    = 0x7E;
-       /* 0x1C : ATA/ATAPI-6 T13 1532D revision1 */
-       pSegIdDrvInfo->minor_ver_num                    = 0x19;
-       /* NOP/READ BUFFER/WRITE BUFFER/Power management feature set support */
-       pSegIdDrvInfo->feature_cmd_set_suprt0           = 0x7068;
-       /* Features/command set is valid/Advanced Pwr management/CFA feature set
-        * not support
-        */
-       pSegIdDrvInfo->feature_cmd_set_suprt1           = 0x400C;
-       pSegIdDrvInfo->feature_cmd_set_suprt2           = 0x4000;
-       /* READ/WRITE BUFFER/PWR Management enable */
-       pSegIdDrvInfo->feature_cmd_set_en0              = 0x7000;
-       /* CFA feature is disabled / Advancde power management disable */
-       pSegIdDrvInfo->feature_cmd_set_en1              = 0x0;
-       pSegIdDrvInfo->feature_cmd_set_en2              = 0x4000;
-       pSegIdDrvInfo->reserved4                        = 0x0;
-       /* 0x1 * 2minutes */
-       pSegIdDrvInfo->req_time_for_security_er_done    = 0x19;
-       pSegIdDrvInfo->req_time_for_enhan_security_er_done      = 0x19;
-       /* Advanced power management level 1 */
-       pSegIdDrvInfo->adv_pwr_mgm_lvl_val                      = 0x0;
-       pSegIdDrvInfo->reserved5                        = 0x0;
-       memset(pSegIdDrvInfo->reserved6, 0x00, 68);
-       /* Security mode feature is disabled */
-       pSegIdDrvInfo->security_stas                    = 0x0;
-       memset(pSegIdDrvInfo->vendor_uniq_bytes, 0x00, 62);
-       /* CFA power mode 1 support in maximum 200mA */
-       pSegIdDrvInfo->cfa_pwr_mode                     = 0x0100;
-       memset(pSegIdDrvInfo->reserved7, 0x00, 190);
-}
-
-static int mg_storage_config(void)
-{
-       uint8_t buff[512];
-       int ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd);
-       if (ret != ERROR_OK)
-               return ret;
-
-       mg_gen_ataid((mg_io_type_drv_info *)(void *)buff);
-
-       ret = mg_mflash_do_write_sects(buff, 0, 1, mg_vcmd_update_stgdrvinfo);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default);
-       if (ret != ERROR_OK)
-               return ret;
-
-       LOG_INFO("mflash: storage config ok");
-       return ret;
-}
-
-static int mg_boot_config(void)
-{
-       uint8_t buff[512];
-       int ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd);
-       if (ret != ERROR_OK)
-               return ret;
-
-       memset(buff, 0xff, 512);
-
-       buff[0] = mg_op_mode_snd;               /* operation mode */
-       buff[1] = MG_UNLOCK_OTP_AREA;
-       buff[2] = 4;                            /* boot size */
-       *((uint32_t *)(void *)(buff + 4)) = 0;          /* XIP size */
-
-       ret = mg_mflash_do_write_sects(buff, 0, 1, mg_vcmd_update_xipinfo);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default);
-       if (ret != ERROR_OK)
-               return ret;
-
-       LOG_INFO("mflash: boot config ok");
-       return ret;
-}
-
-static int mg_set_pll(mg_pll_t *pll)
-{
-       uint8_t buff[512];
-       int ret;
-
-       memset(buff, 0xff, 512);
-       /* PLL Lock cycle and Feedback 9bit Divider */
-       memcpy(buff, &pll->lock_cyc, sizeof(uint32_t));
-       memcpy(buff + 4, &pll->feedback_div, sizeof(uint16_t));
-       buff[6] = pll->input_div;               /* PLL Input 5bit Divider */
-       buff[7] = pll->output_div;              /* PLL Output Divider */
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_mflash_do_write_sects(buff, 0, 1, mg_vcmd_wr_pll);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default);
-       if (ret != ERROR_OK)
-               return ret;
-
-       LOG_INFO("mflash: set pll ok");
-       return ret;
-}
-
-static int mg_erase_nand(void)
-{
-       int ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_vcmd);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_mflash_do_write_sects(NULL, 0, 0, mg_vcmd_purge_nand);
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_set_feature(mg_feature_id_transmode, mg_feature_val_trans_default);
-       if (ret != ERROR_OK)
-               return ret;
-
-       LOG_INFO("mflash: erase nand ok");
-       return ret;
-}
-
-COMMAND_HANDLER(mg_config_cmd)
-{
-       double fin, fout;
-       mg_pll_t pll;
-       int ret;
-
-       ret = mg_verify_interface();
-       if (ret != ERROR_OK)
-               return ret;
-
-       ret = mg_mflash_rst();
-       if (ret != ERROR_OK)
-               return ret;
-
-       switch (CMD_ARGC) {
-               case 2:
-                       if (!strcmp(CMD_ARGV[1], "boot"))
-                               return mg_boot_config();
-                       else if (!strcmp(CMD_ARGV[1], "storage"))
-                               return mg_storage_config();
-                       else
-                               return ERROR_COMMAND_NOTFOUND;
-                       break;
-               case 3:
-                       if (!strcmp(CMD_ARGV[1], "pll")) {
-                               unsigned long freq;
-                               COMMAND_PARSE_NUMBER(ulong, CMD_ARGV[2], freq);
-                               fin = freq;
-
-                               if (fin > MG_PLL_CLK_OUT) {
-                                       LOG_ERROR("mflash: input freq. is too large");
-                                       return ERROR_MG_INVALID_OSC;
-                               }
-
-                               fout = mg_calc_pll(fin, &pll);
-
-                               if (!fout) {
-                                       LOG_ERROR("mflash: cannot generate valid pll");
-                                       return ERROR_MG_INVALID_PLL;
-                               }
-
-                               LOG_INFO("mflash: Fout=%" PRIu32 " Hz, feedback=%u,"
-                                               "indiv=%u, outdiv=%u, lock=%u",
-                                               (uint32_t)fout, pll.feedback_div,
-                                               pll.input_div, pll.output_div,
-                                               pll.lock_cyc);
-
-                               ret = mg_erase_nand();
-                               if (ret != ERROR_OK)
-                                       return ret;
-
-                               return mg_set_pll(&pll);
-                       } else
-                               return ERROR_COMMAND_NOTFOUND;
-                       break;
-               default:
-                       return ERROR_COMMAND_SYNTAX_ERROR;
-       }
-}
-
-static const struct command_registration mflash_exec_command_handlers[] = {
-       {
-               .name = "probe",
-               .handler = mg_probe_cmd,
-               .mode = COMMAND_EXEC,
-               .help = "Detect bank configuration information",
-               .usage = "",
-       },
-       {
-               .name = "write",
-               .handler = mg_write_cmd,
-               .mode = COMMAND_EXEC,
-               /* FIXME bank_num is unused */
-               .usage = "bank_num filename address",
-               .help = "Write binary file at the specified address.",
-       },
-       {
-               .name = "dump",
-               .handler = mg_dump_cmd,
-               .mode = COMMAND_EXEC,
-               /* FIXME bank_num is unused */
-               .usage = "bank_num filename address size",
-               .help = "Write specified number of bytes from a binary file "
-                       "to the specified, address.",
-       },
-       {
-               .name = "config",
-               .handler = mg_config_cmd,
-               .mode = COMMAND_EXEC,
-               .help = "Configure MFLASH options.",
-               .usage = "('boot'|'storage'|'pll' frequency)",
-       },
-       COMMAND_REGISTRATION_DONE
-};
-
-static int mflash_init_drivers(struct command_context *cmd_ctx)
-{
-       if (!mflash_bank)
-               return ERROR_OK;
-       return register_commands(cmd_ctx, NULL, mflash_exec_command_handlers);
-}
-
-COMMAND_HANDLER(handle_mflash_init_command)
-{
-       if (CMD_ARGC != 0)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       static bool mflash_initialized;
-       if (mflash_initialized) {
-               LOG_INFO("'mflash init' has already been called");
-               return ERROR_OK;
-       }
-       mflash_initialized = true;
-
-       LOG_DEBUG("Initializing mflash devices...");
-       return mflash_init_drivers(CMD_CTX);
-}
-
-COMMAND_HANDLER(mg_bank_cmd)
-{
-       struct target *target;
-       int i;
-
-       if (CMD_ARGC < 4)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       target = get_target(CMD_ARGV[3]);
-       if (target == NULL) {
-               LOG_ERROR("target '%s' not defined", CMD_ARGV[3]);
-               return ERROR_FAIL;
-       }
-
-       mflash_bank = calloc(sizeof(struct mflash_bank), 1);
-       COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], mflash_bank->base);
-       /** @todo Verify how this parsing should work, then document it. */
-       char *str;
-       mflash_bank->rst_pin.num = strtoul(CMD_ARGV[2], &str, 0);
-       if (*str)
-               mflash_bank->rst_pin.port[0] = (uint16_t)
-                       tolower((unsigned)str[0]);
-
-       mflash_bank->target = target;
-
-       for (i = 0; mflash_gpio[i]; i++) {
-               if (!strcmp(mflash_gpio[i]->name, CMD_ARGV[0]))
-                       mflash_bank->gpio_drv = mflash_gpio[i];
-       }
-
-       if (!mflash_bank->gpio_drv) {
-               LOG_ERROR("%s is unsupported soc", CMD_ARGV[0]);
-               return ERROR_MG_UNSUPPORTED_SOC;
-       }
-
-       return ERROR_OK;
-}
-
-static const struct command_registration mflash_config_command_handlers[] = {
-       {
-               .name = "bank",
-               .handler = mg_bank_cmd,
-               .mode = COMMAND_CONFIG,
-               .help = "configure a mflash device bank",
-               .usage = "soc_type base_addr pin_id target",
-       },
-       {
-               .name = "init",
-               .mode = COMMAND_CONFIG,
-               .handler = handle_mflash_init_command,
-               .help = "initialize mflash devices",
-               .usage = ""
-       },
-       COMMAND_REGISTRATION_DONE
-};
-static const struct command_registration mflash_command_handler[] = {
-       {
-               .name = "mflash",
-               .mode = COMMAND_ANY,
-               .help = "mflash command group",
-               .usage = "",
-               .chain = mflash_config_command_handlers,
-       },
-       COMMAND_REGISTRATION_DONE
-};
-int mflash_register_commands(struct command_context *cmd_ctx)
-{
-       return register_commands(cmd_ctx, NULL, mflash_command_handler);
-}

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)