flash/nor: add support of STM32WB on top STM32L4 flash driver

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index b79325276d35e304e7d3d1701deb9b51780da7ce..c526a632a7e8f1c1c0e5f932b8bdb7038d59338f 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -6869,7 +6869,7 @@ The @var{num} parameter is a value shown by @command{flash banks}.
 @end deffn
 
 @deffn {Flash Driver} stm32l4x
-All members of the STM32L4 microcontroller families from STMicroelectronics
+All members of the STM32L4 and STM32WB microcontroller families from STMicroelectronics
 include internal flash and use ARM Cortex-M4 cores.
 The driver automatically recognizes a number of these chips using
 the chip identification register, and autoconfigures itself.
@@ -6911,7 +6911,9 @@ is the register offset of the Option byte to read.
 For example to read the FLASH_OPTR register:
 @example
 stm32l4x option_read 0 0x20
-# Option Register: <0x40022020> = 0xffeff8aa
+# Option Register (for STM32L4x): <0x40022020> = 0xffeff8aa
+# Option Register (for STM32WBx): <0x58004020> = ...
+# The correct flash base address will be used automatically
 @end example
 
 The above example will read out the FLASH_OPTR register which contains the RDP