UserGuide: Fixed link to Wiggler2 project.

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 254428b5e708a8d0f129b6127701447fa32f3881..a5478b41bd5e50a9866fe4eba183e8b3cbf62e70 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -336,7 +336,7 @@ a built-in low cost debug adapter and usb-to-serial solution.
 
 @itemize @bullet
 @item @b{usbjtag}
-@* Link @url{http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html}
+@* Link @url{http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html}
 @item @b{jtagkey}
 @* See: @url{http://www.amontec.com/jtagkey.shtml}
 @item @b{jtagkey2}
@@ -369,7 +369,8 @@ Stellaris eval boards, they can be used to debug other target boards.
 @item @b{stm32stick}
 @* Link @url{http://www.hitex.com/stm32-stick}
 @item @b{axm0432_jtag}
-@* Axiom AXM-0432 Link @url{http://www.axman.com}
+@* Axiom AXM-0432 Link @url{http://www.axman.com} - NOTE:  This JTAG does not appear
+to be available anymore as of April 2012.
 @item @b{cortino}
 @* Link @url{http://www.hitex.com/index.php?id=cortino}
 @item @b{dlp-usb1232h}
@@ -416,7 +417,7 @@ Raisonance has an adapter called @b{RLink}.  It exists in a stripped-down form o
 
 @itemize @bullet
 @item @b{Raisonance RLink}
-@* Link: @url{http://www.raisonance.com/products/RLink.php}
+@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html}
 @item @b{STM32 Primer}
 @* Link: @url{http://www.stm32circle.com/resources/stm32primer.php}
 @item @b{STM32 Primer2}
@@ -425,7 +426,7 @@ Raisonance has an adapter called @b{RLink}.  It exists in a stripped-down form o
 
 @section USB ST-LINK based
 ST Micro has an adapter called @b{ST-LINK}.
-They only works with ST Micro chips, notably STM32 and STM8.
+They only work with ST Micro chips, notably STM32 and STM8.
 
 @itemize @bullet
 @item @b{ST-LINK}
@@ -438,7 +439,7 @@ They only works with ST Micro chips, notably STM32 and STM8.
 
 For info the original ST-LINK enumerates using the mass storage usb class, however
 it's implementation is completely broken. The result is this causes issues under linux.
-The simplest solution is to get linux to ignore the ST-LINK using one of the following method's:
+The simplest solution is to get linux to ignore the ST-LINK using one of the following methods:
 @itemize @bullet
 @item modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:i
 @item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf
@@ -465,7 +466,7 @@ The simplest solution is to get linux to ignore the ST-LINK using one of the fol
 @section IBM PC Parallel Printer Port Based
 
 The two well known ``JTAG Parallel Ports'' cables are the Xilnx DLC5
-and the MacGraigor Wiggler. There are many clones and variations of
+and the Macraigor Wiggler. There are many clones and variations of
 these on the market.
 
 Note that parallel ports are becoming much less common, so if you
@@ -488,8 +489,7 @@ produced, PDF schematics are easily found and it is easy to make.
 @* Link: @url{http://www.gateworks.com/products/avila_accessories/gw16042.php}
 
 @item @b{Wiggler2}
-@*@uref{http://www.ccac.rwth-aachen.de/@/~michaels/@/index.php/hardware/@/armjtag,
-Improved parallel-port wiggler-style JTAG adapter}
+@* Link: @url{http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag}
 
 @item @b{Wiggler_ntrst_inverted}
 @* Yet another variation - See the source code, src/jtag/parport.c
@@ -512,8 +512,7 @@ Improved parallel-port wiggler-style JTAG adapter}
 
 @item @b{flashlink}
 @* From ST Microsystems;
-@uref{http://www.st.com/stonline/@/products/literature/um/7889.pdf,
-FlashLINK JTAG programing cable for PSD and uPSD}
+@* Link: @url{http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/DM00039500.pdf}
 
 @end itemize