Several commands let you examine the list of targets:
-@deffn Command {target count}
-@emph{Note: target numbers are deprecated; don't use them.
-They will be removed shortly after August 2010, including this command.
-Iterate target using @command{target names}, not by counting.}
-
-Returns the number of targets, @math{N}.
-The highest numbered target is @math{N - 1}.
-@example
-set c [target count]
-for @{ set x 0 @} @{ $x < $c @} @{ incr x @} @{
- # Assuming you have created this function
- print_target_details $x
-@}
-@end example
-@end deffn
-
@deffn Command {target current}
Returns the name of the current target.
@end deffn
@end example
@end deffn
-@deffn Command {target number} number
-@emph{Note: target numbers are deprecated; don't use them.
-They will be removed shortly after August 2010, including this command.}
-
-The list of targets is numbered starting at zero.
-This command returns the name of the target at index @var{number}.
-@example
-set thename [target number $x]
-puts [format "Target %d is: %s\n" $x $thename]
-@end example
-@end deffn
-
@c yep, "target list" would have been better.
@c plus maybe "target setdefault".
@end deffn
@deffn {Flash Driver} stellaris
-All members of the Stellaris LM3Sxxx microcontroller family from
-Texas Instruments
-include internal flash and use ARM Cortex M3 cores.
-The driver automatically recognizes a number of these chips using
-the chip identification register, and autoconfigures itself.
+All members of the Stellaris LM3Sxxx, LM4x and Tiva C microcontroller
+families from Texas Instruments include internal flash. The driver
+automatically recognizes a number of these chips using the chip
+identification register, and autoconfigures itself.
@footnote{Currently there is a @command{stellaris mass_erase} command.
That seems pointless since the same effect can be had using the
standard @command{flash erase_address} command.}
works only for chips that do not have factory pre-programmed region 0
code.
@end deffn
+
+@deffn {Flash Driver} mrvlqspi
+This driver supports QSPI flash controller of Marvell's Wireless
+Microcontroller platform.
+
+The flash size is autodetected based on the table of known JEDEC IDs
+hardcoded in the OpenOCD sources.
+@end deffn
@end deffn
@section mFlash