* CPU Configuration:: CPU Configuration
* Flash Commands:: Flash Commands
* Flash Programming:: Flash Programming
-* NAND Flash Commands:: NAND Flash Commands
* PLD/FPGA Commands:: PLD/FPGA Commands
* General Commands:: General Commands
* Architecture and Core Commands:: Architecture and Core Commands
OpenOCD internally. @xref{Debug Adapter Hardware}.
@b{GDB Debug:} It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T,
-ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x) and
-Cortex-M3 (Stellaris LM3, ST STM32 and Energy Micro EFM32) based cores to be
-debugged via the GDB protocol.
+ARM922T, ARM926EJ--S, ARM966E--S), XScale (PXA25x, IXP42x), Cortex-M3
+(Stellaris LM3, ST STM32 and Energy Micro EFM32) and Intel Quark (x10xx)
+based cores to be debugged via the GDB protocol.
@b{Flash Programming:} Flash writing is supported for external
CFI-compatible NOR flashes (Intel and AMD/Spansion command set) and several
The OpenOCD web site provides the latest public news from the community:
-@uref{http://openocd.sourceforge.net/}
+@uref{http://openocd.org/}
@section Latest User's Guide:
available. A version for more recent code may be available.
Its HTML form is published regularly at:
-@uref{http://openocd.sourceforge.net/doc/html/index.html}
+@uref{http://openocd.org/doc/html/index.html}
PDF form is likewise published at:
-@uref{http://openocd.sourceforge.net/doc/pdf/openocd.pdf}
+@uref{http://openocd.org/doc/pdf/openocd.pdf}
@section OpenOCD User's Forum
technical information about the software internals, development
processes, and similar documentation:
-@uref{http://openocd.sourceforge.net/doc/doxygen/html/index.html}
+@uref{http://openocd.org/doc/doxygen/html/index.html}
This document is a work-in-progress, but contributions would be welcome
to fill in the gaps. All of the source files are provided in-tree,
listed in the Doxyfile configuration at the top of the source tree.
+@section Gerrit Review System
+
+All changes in the OpenOCD Git repository go through the web-based Gerrit
+Code Review System:
+
+@uref{http://openocd.zylin.com/}
+
+After a one-time registration and repository setup, anyone can push commits
+from their local Git repository directly into Gerrit.
+All users and developers are encouraged to review, test, discuss and vote
+for changes in Gerrit. The feedback provides the basis for a maintainer to
+eventually submit the change to the main Git repository.
+
+The @file{HACKING} file, also available as the Patch Guide in the Doxygen
+Developer Manual, contains basic information about how to connect a
+repository to Gerrit, prepare and push patches. Patch authors are expected to
+maintain their changes while they're in Gerrit, respond to feedback and if
+necessary rework and push improved versions of the change.
+
@section OpenOCD Developer Mailing List
The OpenOCD Developer Mailing List provides the primary means of
@uref{https://lists.sourceforge.net/mailman/listinfo/openocd-devel}
-Discuss and submit patches to this list.
-The @file{HACKING} file contains basic information about how
-to prepare patches.
-
-@section OpenOCD Bug Database
+@section OpenOCD Bug Tracker
-During the 0.4.x release cycle the OpenOCD project team began
-using Trac for its bug database:
+The OpenOCD Bug Tracker is hosted on SourceForge:
-@uref{https://sourceforge.net/apps/trac/openocd}
+@uref{http://bugs.openocd.org/}
@node Debug Adapter Hardware
@itemize @bullet
@item @b{Raisonance RLink}
-@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html}
+@* Link: @url{http://www.mcu-raisonance.com/~rlink-debugger-programmer__@/microcontrollers__tool~tool__T018:4cn9ziz4bnx6.html}
@item @b{STM32 Primer}
@* Link: @url{http://www.stm32circle.com/resources/stm32primer.php}
@item @b{STM32 Primer2}
Properly installing OpenOCD sets up your operating system to grant it access
to the debug adapters. On Linux, this usually involves installing a file
-in @file{/etc/udev/rules.d,} so OpenOCD has permissions. MS-Windows needs
+in @file{/etc/udev/rules.d,} so OpenOCD has permissions. An example rules file
+that works for many common adapters is shipped with OpenOCD in the
+@file{contrib} directory. MS-Windows needs
complex and confusing driver configuration for every peripheral. Such issues
are unique to each operating system, and are not detailed in this User's Guide.
@item any search dir specified on the command line using the @option{-s} option,
@item any search dir specified using the @command{add_script_search_dir} command,
@item @file{$HOME/.openocd} (not on Windows),
+@item a directory in the @env{OPENOCD_SCRIPTS} environment variable (if set),
@item the site wide script library @file{$pkgdatadir/site} and
@item the OpenOCD-supplied script library @file{$pkgdatadir/scripts}.
@end enumerate
@example
Open On-Chip Debugger 0.4.0 (2010-01-14-15:06)
For bug reports, read
- http://openocd.sourceforge.net/doc/doxygen/bugs.html
+ http://openocd.org/doc/doxygen/bugs.html
Info : JTAG tap: lm3s.cpu tap/device found: 0x3ba00477
(mfg: 0x23b, part: 0xba00, ver: 0x3)
@end example
needs to get a new board working smoothly.
It provides guidelines for creating those files.
-You should find the following directories under @t{$(INSTALLDIR)/scripts},
-with files including the ones listed here.
-Use them as-is where you can; or as models for new files.
+You should find the following directories under
+@t{$(INSTALLDIR)/scripts}, with config files maintained upstream. Use
+them as-is where you can; or as models for new files.
@itemize @bullet
@item @file{interface} ...
-These are for debug adapters.
-Files that configure JTAG adapters go here.
-@example
-$ ls interface -R
-interface/:
-altera-usb-blaster.cfg hilscher_nxhx50_re.cfg openocd-usb-hs.cfg
-arm-jtag-ew.cfg hitex_str9-comstick.cfg openrd.cfg
-at91rm9200.cfg icebear.cfg osbdm.cfg
-axm0432.cfg jlink.cfg parport.cfg
-busblaster.cfg jtagkey2.cfg parport_dlc5.cfg
-buspirate.cfg jtagkey2p.cfg redbee-econotag.cfg
-calao-usb-a9260-c01.cfg jtagkey.cfg redbee-usb.cfg
-calao-usb-a9260-c02.cfg jtagkey-tiny.cfg rlink.cfg
-calao-usb-a9260.cfg jtag-lock-pick_tiny_2.cfg sheevaplug.cfg
-chameleon.cfg kt-link.cfg signalyzer.cfg
-cortino.cfg lisa-l.cfg signalyzer-h2.cfg
-digilent-hs1.cfg luminary.cfg signalyzer-h4.cfg
-dlp-usb1232h.cfg luminary-icdi.cfg signalyzer-lite.cfg
-dummy.cfg luminary-lm3s811.cfg stlink-v1.cfg
-estick.cfg minimodule.cfg stlink-v2.cfg
-flashlink.cfg neodb.cfg stm32-stick.cfg
-flossjtag.cfg ngxtech.cfg sysfsgpio-raspberrypi.cfg
-flossjtag-noeeprom.cfg olimex-arm-usb-ocd.cfg ti-icdi.cfg
-flyswatter2.cfg olimex-arm-usb-ocd-h.cfg turtelizer2.cfg
-flyswatter.cfg olimex-arm-usb-tiny-h.cfg ulink.cfg
-ftdi olimex-jtag-tiny.cfg usb-jtag.cfg
-hilscher_nxhx10_etm.cfg oocdlink.cfg usbprog.cfg
-hilscher_nxhx500_etm.cfg opendous.cfg vpaclink.cfg
-hilscher_nxhx500_re.cfg opendous_ftdi.cfg vsllink.cfg
-hilscher_nxhx50_etm.cfg openocd-usb.cfg xds100v2.cfg
-
-interface/ftdi:
-axm0432.cfg hitex_str9-comstick.cfg olimex-jtag-tiny.cfg
-calao-usb-a9260-c01.cfg icebear.cfg oocdlink.cfg
-calao-usb-a9260-c02.cfg jtagkey2.cfg opendous_ftdi.cfg
-cortino.cfg jtagkey2p.cfg openocd-usb.cfg
-dlp-usb1232h.cfg jtagkey.cfg openocd-usb-hs.cfg
-dp_busblaster.cfg jtag-lock-pick_tiny_2.cfg openrd.cfg
-flossjtag.cfg kt-link.cfg redbee-econotag.cfg
-flossjtag-noeeprom.cfg lisa-l.cfg redbee-usb.cfg
-flyswatter2.cfg luminary.cfg sheevaplug.cfg
-flyswatter.cfg luminary-icdi.cfg signalyzer.cfg
-gw16042.cfg luminary-lm3s811.cfg signalyzer-lite.cfg
-hilscher_nxhx10_etm.cfg minimodule.cfg stm32-stick.cfg
-hilscher_nxhx500_etm.cfg neodb.cfg turtelizer2-revB.cfg
-hilscher_nxhx500_re.cfg ngxtech.cfg turtelizer2-revC.cfg
-hilscher_nxhx50_etm.cfg olimex-arm-usb-ocd.cfg vpaclink.cfg
-hilscher_nxhx50_re.cfg olimex-arm-usb-ocd-h.cfg xds100v2.cfg
-hitex_lpc1768stick.cfg olimex-arm-usb-tiny-h.cfg
-$
-@end example
+These are for debug adapters. Files that specify configuration to use
+specific JTAG, SWD and other adapters go here.
@item @file{board} ...
-think Circuit Board, PWA, PCB, they go by many names. Board files
+Think Circuit Board, PWA, PCB, they go by many names. Board files
contain initialization items that are specific to a board.
+
They reuse target configuration files, since the same
microprocessor chips are used on many boards,
but support for external parts varies widely. For
sequence to enable that external flash or SDRAM should be found in the
board file. Boards may also contain multiple targets: two CPUs; or
a CPU and an FPGA.
-@example
-$ ls board
-actux3.cfg lpc1850_spifi_generic.cfg
-am3517evm.cfg lpc4350_spifi_generic.cfg
-arm_evaluator7t.cfg lubbock.cfg
-at91cap7a-stk-sdram.cfg mcb1700.cfg
-at91eb40a.cfg microchip_explorer16.cfg
-at91rm9200-dk.cfg mini2440.cfg
-at91rm9200-ek.cfg mini6410.cfg
-at91sam9261-ek.cfg netgear-dg834v3.cfg
-at91sam9263-ek.cfg olimex_LPC2378STK.cfg
-at91sam9g20-ek.cfg olimex_lpc_h2148.cfg
-atmel_at91sam7s-ek.cfg olimex_sam7_ex256.cfg
-atmel_at91sam9260-ek.cfg olimex_sam9_l9260.cfg
-atmel_at91sam9rl-ek.cfg olimex_stm32_h103.cfg
-atmel_sam3n_ek.cfg olimex_stm32_h107.cfg
-atmel_sam3s_ek.cfg olimex_stm32_p107.cfg
-atmel_sam3u_ek.cfg omap2420_h4.cfg
-atmel_sam3x_ek.cfg open-bldc.cfg
-atmel_sam4s_ek.cfg openrd.cfg
-balloon3-cpu.cfg osk5912.cfg
-colibri.cfg phone_se_j100i.cfg
-crossbow_tech_imote2.cfg phytec_lpc3250.cfg
-csb337.cfg pic-p32mx.cfg
-csb732.cfg propox_mmnet1001.cfg
-da850evm.cfg pxa255_sst.cfg
-digi_connectcore_wi-9c.cfg redbee.cfg
-diolan_lpc4350-db1.cfg rsc-w910.cfg
-dm355evm.cfg sheevaplug.cfg
-dm365evm.cfg smdk6410.cfg
-dm6446evm.cfg spear300evb.cfg
-efikamx.cfg spear300evb_mod.cfg
-eir.cfg spear310evb20.cfg
-ek-lm3s1968.cfg spear310evb20_mod.cfg
-ek-lm3s3748.cfg spear320cpu.cfg
-ek-lm3s6965.cfg spear320cpu_mod.cfg
-ek-lm3s811.cfg steval_pcc010.cfg
-ek-lm3s811-revb.cfg stm320518_eval_stlink.cfg
-ek-lm3s8962.cfg stm32100b_eval.cfg
-ek-lm3s9b9x.cfg stm3210b_eval.cfg
-ek-lm3s9d92.cfg stm3210c_eval.cfg
-ek-lm4f120xl.cfg stm3210e_eval.cfg
-ek-lm4f232.cfg stm3220g_eval.cfg
-embedded-artists_lpc2478-32.cfg stm3220g_eval_stlink.cfg
-ethernut3.cfg stm3241g_eval.cfg
-glyn_tonga2.cfg stm3241g_eval_stlink.cfg
-hammer.cfg stm32f0discovery.cfg
-hilscher_nxdb500sys.cfg stm32f3discovery.cfg
-hilscher_nxeb500hmi.cfg stm32f4discovery.cfg
-hilscher_nxhx10.cfg stm32ldiscovery.cfg
-hilscher_nxhx500.cfg stm32vldiscovery.cfg
-hilscher_nxhx50.cfg str910-eval.cfg
-hilscher_nxsb100.cfg telo.cfg
-hitex_lpc1768stick.cfg ti_am335xevm.cfg
-hitex_lpc2929.cfg ti_beagleboard.cfg
-hitex_stm32-performancestick.cfg ti_beagleboard_xm.cfg
-hitex_str9-comstick.cfg ti_beaglebone.cfg
-iar_lpc1768.cfg ti_blaze.cfg
-iar_str912_sk.cfg ti_pandaboard.cfg
-icnova_imx53_sodimm.cfg ti_pandaboard_es.cfg
-icnova_sam9g45_sodimm.cfg topas910.cfg
-imx27ads.cfg topasa900.cfg
-imx27lnst.cfg twr-k60f120m.cfg
-imx28evk.cfg twr-k60n512.cfg
-imx31pdk.cfg tx25_stk5.cfg
-imx35pdk.cfg tx27_stk5.cfg
-imx53loco.cfg unknown_at91sam9260.cfg
-keil_mcb1700.cfg uptech_2410.cfg
-keil_mcb2140.cfg verdex.cfg
-kwikstik.cfg voipac.cfg
-linksys_nslu2.cfg voltcraft_dso-3062c.cfg
-lisa-l.cfg x300t.cfg
-logicpd_imx27.cfg zy1000.cfg
-$
-@end example
@item @file{target} ...
-think chip. The ``target'' directory represents the JTAG TAPs
+Think chip. The ``target'' directory represents the JTAG TAPs
on a chip
which OpenOCD should control, not a board. Two common types of targets
are ARM chips and FPGA or CPLD chips.
When a chip has multiple TAPs (maybe it has both ARM and DSP cores),
the target config file defines all of them.
-@example
-$ ls target
-aduc702x.cfg lpc1763.cfg
-am335x.cfg lpc1764.cfg
-amdm37x.cfg lpc1765.cfg
-ar71xx.cfg lpc1766.cfg
-at32ap7000.cfg lpc1767.cfg
-at91r40008.cfg lpc1768.cfg
-at91rm9200.cfg lpc1769.cfg
-at91sam3ax_4x.cfg lpc1788.cfg
-at91sam3ax_8x.cfg lpc17xx.cfg
-at91sam3ax_xx.cfg lpc1850.cfg
-at91sam3nXX.cfg lpc2103.cfg
-at91sam3sXX.cfg lpc2124.cfg
-at91sam3u1c.cfg lpc2129.cfg
-at91sam3u1e.cfg lpc2148.cfg
-at91sam3u2c.cfg lpc2294.cfg
-at91sam3u2e.cfg lpc2378.cfg
-at91sam3u4c.cfg lpc2460.cfg
-at91sam3u4e.cfg lpc2478.cfg
-at91sam3uxx.cfg lpc2900.cfg
-at91sam3XXX.cfg lpc2xxx.cfg
-at91sam4sd32x.cfg lpc3131.cfg
-at91sam4sXX.cfg lpc3250.cfg
-at91sam4XXX.cfg lpc4350.cfg
-at91sam7se512.cfg lpc4350.cfg.orig
-at91sam7sx.cfg mc13224v.cfg
-at91sam7x256.cfg nuc910.cfg
-at91sam7x512.cfg omap2420.cfg
-at91sam9260.cfg omap3530.cfg
-at91sam9260_ext_RAM_ext_flash.cfg omap4430.cfg
-at91sam9261.cfg omap4460.cfg
-at91sam9263.cfg omap5912.cfg
-at91sam9.cfg omapl138.cfg
-at91sam9g10.cfg pic32mx.cfg
-at91sam9g20.cfg pxa255.cfg
-at91sam9g45.cfg pxa270.cfg
-at91sam9rl.cfg pxa3xx.cfg
-atmega128.cfg readme.txt
-avr32.cfg samsung_s3c2410.cfg
-c100.cfg samsung_s3c2440.cfg
-c100config.tcl samsung_s3c2450.cfg
-c100helper.tcl samsung_s3c4510.cfg
-c100regs.tcl samsung_s3c6410.cfg
-cs351x.cfg sharp_lh79532.cfg
-davinci.cfg smp8634.cfg
-dragonite.cfg spear3xx.cfg
-dsp56321.cfg stellaris.cfg
-dsp568013.cfg stellaris_icdi.cfg
-dsp568037.cfg stm32f0x_stlink.cfg
-efm32_stlink.cfg stm32f1x.cfg
-epc9301.cfg stm32f1x_stlink.cfg
-faux.cfg stm32f2x.cfg
-feroceon.cfg stm32f2x_stlink.cfg
-fm3.cfg stm32f3x.cfg
-hilscher_netx10.cfg stm32f3x_stlink.cfg
-hilscher_netx500.cfg stm32f4x.cfg
-hilscher_netx50.cfg stm32f4x_stlink.cfg
-icepick.cfg stm32l.cfg
-imx21.cfg stm32lx_dual_bank.cfg
-imx25.cfg stm32lx_stlink.cfg
-imx27.cfg stm32_stlink.cfg
-imx28.cfg stm32w108_stlink.cfg
-imx31.cfg stm32xl.cfg
-imx35.cfg str710.cfg
-imx51.cfg str730.cfg
-imx53.cfg str750.cfg
-imx6.cfg str912.cfg
-imx.cfg swj-dp.tcl
-is5114.cfg test_reset_syntax_error.cfg
-ixp42x.cfg test_syntax_error.cfg
-k40.cfg ti-ar7.cfg
-k60.cfg ti_calypso.cfg
-lpc1751.cfg ti_dm355.cfg
-lpc1752.cfg ti_dm365.cfg
-lpc1754.cfg ti_dm6446.cfg
-lpc1756.cfg tmpa900.cfg
-lpc1758.cfg tmpa910.cfg
-lpc1759.cfg u8500.cfg
-@end example
@item @emph{more} ... browse for other library files which may be useful.
For example, there are various generic and CPU-specific utilities.
@end itemize
The @code{init_boards} procedure is a similar concept concerning board config files
(@xref{theinitboardprocedure,,The init_board procedure}.)
+@anchor{theinittargeteventsprocedure}
+@subsection The init_target_events procedure
+@cindex init_target_events procedure
+
+A special procedure called @code{init_target_events} is run just after
+@code{init_targets} (@xref{theinittargetsprocedure,,The init_targets
+procedure}.) and before @code{init_board}
+(@xref{theinitboardprocedure,,The init_board procedure}.) It is used
+to set up default target events for the targets that do not have those
+events already assigned.
+
@subsection ARM Core Specific Hacks
If the chip has a DCC, enable it. If the chip is an ARM9 with some
second target will listen on gdb_port + 1, and so on.
When not specified during the configuration stage,
the port @var{number} defaults to 3333.
+
+Note: when using "gdb_port pipe", increasing the default remote timeout in
+gdb (with 'set remotetimeout') is recommended. An insufficient timeout may
+cause initialization to fail with "Unknown remote qXfer reply: OK".
+
@end deffn
@deffn {Command} tcl_port [number]
@deffn {Config Command} gdb_target_description (@option{enable}|@option{disable})
Set to @option{enable} to cause OpenOCD to send the target descriptions to gdb via qXfer:features:read packet.
-The default behaviour is @option{disable}.
+The default behaviour is @option{enable}.
@end deffn
@deffn {Command} gdb_save_tdesc
@end deffn
@deffn {Interface Driver} {cmsis-dap}
-CMSIS-DAP compliant based adapter.
+ARM CMSIS-DAP compliant based adapter.
@deffn {Config Command} {cmsis_dap_vid_pid} [vid pid]+
The vendor ID and product ID of the CMSIS-DAP device. If not specified
-known default values are used.
+the driver will attempt to auto detect the CMSIS-DAP device.
Currently, up to eight [@var{vid}, @var{pid}] pairs may be given, e.g.
@example
cmsis_dap_vid_pid 0xc251 0xf001 0x0d28 0x0204
@end example
@end deffn
+@deffn {Config Command} {cmsis_dap_serial} [serial]
+Specifies the @var{serial} of the CMSIS-DAP device to use.
+If not specified, serial numbers are not considered.
+@end deffn
+
@deffn {Command} {cmsis-dap info}
Display various device information, like hardware version, firmware version, current bus status.
@end deffn
and initially asserted reset signals.
@end deffn
-@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-oe}|@option{-noe} oe_mask]
+@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-oe}|@option{-noe} oe_mask] [@option{-alias}|@option{-nalias} name]
Creates a signal with the specified @var{name}, controlled by one or more FTDI
GPIO pins via a range of possible buffer connections. The masks are FTDI GPIO
register bitmasks to tell the driver the connection and type of the output
input as necessary to provide the full set of low, high and Hi-Z
characteristics. In all other cases, the pins specified in a signal definition
are always driven by the FTDI.
+
+If @option{-alias} or @option{-nalias} is used, the signal is created
+identical (or with data inverted) to an already specified signal
+@var{name}.
@end deffn
@deffn {Command} {ftdi_set_signal} name @option{0}|@option{1}|@option{z}
@end example
@end deffn
-@deffn {Command} {usb_blaster} (@option{pin6}|@option{pin8}) (@option{0}|@option{1})
-Sets the state of the unused GPIO pins on USB-Blasters (pins 6 and 8 on the
-female JTAG header). These pins can be used as SRST and/or TRST provided the
-appropriate connections are made on the target board.
+@deffn {Command} {usb_blaster_pin} (@option{pin6}|@option{pin8}) (@option{0}|@option{1}|@option{s}|@option{t})
+Sets the state or function of the unused GPIO pins on USB-Blasters
+(pins 6 and 8 on the female JTAG header). These pins can be used as
+SRST and/or TRST provided the appropriate connections are made on the
+target board.
-For example, to use pin 6 as SRST (as with an AVR board):
+For example, to use pin 6 as SRST:
@example
-$_TARGETNAME configure -event reset-assert \
- "usb_blaster pin6 1; wait 1; usb_blaster pin6 0"
+usb_blaster_pin pin6 s
+reset_config srst_only
@end example
@end deffn
+@deffn {Command} {usb_blaster_lowlevel_driver} (@option{ftdi}|@option{ftd2xx}|@option{ublast2})
+Chooses the low level access method for the adapter. If not specified,
+@option{ftdi} is selected unless it wasn't enabled during the
+configure stage. USB-Blaster II needs @option{ublast2}.
+@end deffn
+
+@deffn {Command} {usb_blaster_firmware} @var{path}
+This command specifies @var{path} to access USB-Blaster II firmware
+image. To be used with USB-Blaster II only.
+@end deffn
+
@end deffn
@deffn {Interface Driver} {gw16012}
@end deffn
@deffn {Interface Driver} {jlink}
-Segger J-Link family of USB adapters. It currently supports only the JTAG transport.
+Segger J-Link family of USB adapters. It currently supports JTAG and SWD transports.
@quotation Compatibility Note
Segger released many firmware versions for the many harware versions they
@deffn {Config} {jlink pid} val
Set the USB PID of the interface. As a configuration command, it can be used only before 'init'.
@end deffn
+@deffn {Config} {jlink serial} serial-number
+Set the @var{serial-number} of the interface, in case more than one adapter is connected to the host.
+If not specified, serial numbers are not considered.
+
+Note that there may be leading zeros in the @var{serial-number} string
+that will not show in the Segger software, but must be specified here.
+Debug level 3 output contains serial numbers if there is a mismatch.
+
+As a configuration command, it can be used only before 'init'.
+@end deffn
@end deffn
@deffn {Interface Driver} {parport}
@end quotation
@end deffn
+@anchor{hla_interface}
@deffn {Interface Driver} {hla}
This is a driver that supports multiple High Level Adapters.
This type of adapter does not expose some of the lower level api's
that OpenOCD would normally use to access the target.
Currently supported adapters include the ST STLINK and TI ICDI.
+STLINK firmware version >= V2.J21.S4 recommended due to issues with earlier
+versions of firmware where serial number is reset after first use. Suggest
+using ST firmware update utility to upgrade STLINK firmware even if current
+version reported is V2.J21.S4.
@deffn {Config Command} {hla_device_desc} description
Currently Not Supported.
@end deffn
@deffn {Config Command} {hla_serial} serial
-Currently Not Supported.
+Specifies the serial number of the adapter.
@end deffn
@deffn {Config Command} {hla_layout} (@option{stlink}|@option{icdi})
The vendor ID and product ID of the device.
@end deffn
-@deffn {Config Command} {trace} source_clock_hz [output_file_path]
-Enable SWO tracing (if supported). The source clock rate for the
-trace port must be specified, this is typically the CPU clock rate. If
-the optional output file is specified then raw trace data is appended
-to the file, and the file is created if it does not exist.
+@deffn {Command} {hla_command} command
+Execute a custom adapter-specific command. The @var{command} string is
+passed as is to the underlying adapter layout handler.
@end deffn
@end deffn
version of OpenOCD.
@end deffn
-@deffn Command {transport select} transport_name
+@deffn Command {transport select} @option{transport_name}
Select which of the supported transports to use in this OpenOCD session.
-The transport must be supported by the debug adapter hardware and by the
-version of OpenOCD you are using (including the adapter's driver).
-No arguments: returns name of session's selected transport.
+
+When invoked with @option{transport_name}, attempts to select the named
+transport. The transport must be supported by the debug adapter
+hardware and by the version of OpenOCD you are using (including the
+adapter's driver).
+
+If no transport has been selected and no @option{transport_name} is
+provided, @command{transport select} auto-selects the first transport
+supported by the debug adapter.
+
+@command{transport select} always returns the name of the session's selected
+transport, if any.
@end deffn
@subsection JTAG Transport
each of which must be explicitly declared.
JTAG supports both debugging and boundary scan testing.
Flash programming support is built on top of debug support.
+
+JTAG transport is selected with the command @command{transport select
+jtag}. Unless your adapter uses @ref{hla_interface,the hla interface
+driver}, in which case the command is @command{transport select
+hla_jtag}.
+
@subsection SWD Transport
@cindex SWD
@cindex Serial Wire Debug
SWD is debug-oriented, and does not support boundary scan testing.
Flash programming support is built on top of debug support.
(Some processors support both JTAG and SWD.)
+
+SWD transport is selected with the command @command{transport select
+swd}. Unless your adapter uses @ref{hla_interface,the hla interface
+driver}, in which case the command is @command{transport select
+hla_swd}.
+
@deffn Command {swd newdap} ...
Declares a single DAP which uses SWD transport.
Parameters are currently the same as "jtag newtap" but this is
No parameters: displays current settings.
@end deffn
-@subsection CMSIS-DAP Transport
-@cindex CMSIS-DAP
-CMSIS-DAP is an ARM-specific transport that is used to connect to
-compilant debuggers.
-
@subsection SPI Transport
@cindex SPI
@cindex Serial Peripheral Interface
name rules: start with an alphabetic character, then numbers
and underscores are OK; while others (including dots!) are not.
-@quotation Tip
-In older code, JTAG TAPs were numbered from 0..N.
-This feature is still present.
-However its use is highly discouraged, and
-should not be relied on; it will be removed by mid-2010.
-Update all of your scripts to use TAP names rather than numbers,
-by paying attention to the runtime warnings they trigger.
-Using TAP numbers in target configuration scripts prevents
-reusing those scripts on boards with multiple targets.
-@end quotation
-
@section TAP Declaration Commands
@c shouldn't this be(come) a {Config Command}?
Several commands let you examine the list of targets:
-@deffn Command {target count}
-@emph{Note: target numbers are deprecated; don't use them.
-They will be removed shortly after August 2010, including this command.
-Iterate target using @command{target names}, not by counting.}
-
-Returns the number of targets, @math{N}.
-The highest numbered target is @math{N - 1}.
-@example
-set c [target count]
-for @{ set x 0 @} @{ $x < $c @} @{ incr x @} @{
- # Assuming you have created this function
- print_target_details $x
-@}
-@end example
-@end deffn
-
@deffn Command {target current}
Returns the name of the current target.
@end deffn
@end example
@end deffn
-@deffn Command {target number} number
-@emph{Note: target numbers are deprecated; don't use them.
-They will be removed shortly after August 2010, including this command.}
-
-The list of targets is numbered starting at zero.
-This command returns the name of the target at index @var{number}.
-@example
-set thename [target number $x]
-puts [format "Target %d is: %s\n" $x $thename]
-@end example
-@end deffn
-
@c yep, "target list" would have been better.
@c plus maybe "target setdefault".
only relevant on boards which have more than one target.
@end deffn
-@section Target CPU Types and Variants
+@section Target CPU Types
@cindex target type
@cindex CPU type
-@cindex CPU variant
Each target has a @dfn{CPU type}, as shown in the output of
the @command{targets} command. You need to specify that type
(@pxref{Architecture and Core Commands}),
and more.
-For some CPU types, OpenOCD also defines @dfn{variants} which
-indicate differences that affect their handling.
-For example, a particular implementation bug might need to be
-worked around in some chip versions.
-
It's easy to see what target types are supported,
since there's a command to list them.
-However, there is currently no way to list what target variants
-are supported (other than by reading the OpenOCD source code).
@anchor{targettypes}
@deffn Command {target types}
Lists all supported target types.
-At this writing, the supported CPU types and variants are:
+At this writing, the supported CPU types are:
@itemize @bullet
@item @code{arm11} -- this is a generation of ARMv6 cores
(Support for this is still incomplete.)
@item @code{fa526} -- resembles arm920 (w/o Thumb)
@item @code{feroceon} -- resembles arm926
-@item @code{mips_m4k} -- a MIPS core. This supports one variant:
+@item @code{mips_m4k} -- a MIPS core
@item @code{xscale} -- this is actually an architecture,
not a CPU type. It is based on the ARMv5 architecture.
-There are several variants defined:
-@itemize @minus
-@item @code{ixp42x}, @code{ixp45x}, @code{ixp46x},
-@code{pxa27x} ... instruction register length is 7 bits
-@item @code{pxa250}, @code{pxa255},
-@code{pxa26x} ... instruction register length is 5 bits
-@item @code{pxa3xx} ... instruction register length is 11 bits
-@end itemize
@item @code{openrisc} -- this is an OpenRISC 1000 core.
The current implementation supports three JTAG TAP cores:
@itemize @minus
-@item @code{OpenCores TAP} (See: @emph{http://opencores.org/project,jtag})
-@item @code{Altera Virtual JTAG TAP} (See: @emph{http://www.altera.com/literature/ug/ug_virtualjtag.pdf})
-@item @code{Xilinx BSCAN_* virtual JTAG interface} (See: @emph{http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_2/spartan6_hdl.pdf})
+@item @code{OpenCores TAP} (See: @url{http://opencores.org/project,jtag})
+@item @code{Altera Virtual JTAG TAP} (See: @url{http://www.altera.com/literature/ug/ug_virtualjtag.pdf})
+@item @code{Xilinx BSCAN_* virtual JTAG interface} (See: @url{http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_2/spartan6_hdl.pdf})
@end itemize
And two debug interfaces cores:
@itemize @minus
-@item @code{Advanced debug interface} (See: @emph{http://opencores.org/project,adv_debug_sys})
-@item @code{SoC Debug Interface} (See: @emph{http://opencores.org/project,dbg_interface})
+@item @code{Advanced debug interface} (See: @url{http://opencores.org/project,adv_debug_sys})
+@item @code{SoC Debug Interface} (See: @url{http://opencores.org/project,dbg_interface})
@end itemize
@end itemize
@end deffn
@item @var{configparams} ... all parameters accepted by
@command{$target_name configure} are permitted.
If the target is big-endian, set it here with @code{-endian big}.
-If the variant matters, set it here with @code{-variant}.
You @emph{must} set the @code{-chain-position @var{dotted.name}} here.
@end itemize
@emph{Warning:} changing some of these after setup is dangerous.
For example, moving a target from one TAP to another;
-and changing its endianness or variant.
+and changing its endianness.
@itemize @bullet
two different handlers, but calling it twice with the
same event name assigns only one handler.
-@item @code{-variant} @var{name} -- specifies a variant of the target,
-which OpenOCD needs to know about.
-
@item @code{-work-area-backup} (@option{0}|@option{1}) -- says
whether the work area gets backed up; by default,
@emph{it is not backed up.}
@anchor{rtostype}
@item @code{-rtos} @var{rtos_type} -- enable rtos support for target,
@var{rtos_type} can be one of @option{auto}|@option{eCos}|@option{ThreadX}|
-@option{FreeRTOS}|@option{linux}|@option{ChibiOS}|@option{embKernel}
+@option{FreeRTOS}|@option{linux}|@option{ChibiOS}|@option{embKernel}|@option{mqx}
@xref{gdbrtossupport,,RTOS Support}.
@end itemize
mychip.cpu configure -event gdb-attach my_attach_proc
mychip.cpu configure -event gdb-attach @{
echo "Reset..."
- # To make flash probe and gdb load to flash work we need a reset init.
+ # To make flash probe and gdb load to flash work
+ # we need a reset init.
reset init
@}
@end example
@item @b{gdb-end}
@* When the target has halted and GDB is not doing anything (see early halt)
@item @b{gdb-flash-erase-start}
-@* Before the GDB flash process tries to erase the flash
+@* Before the GDB flash process tries to erase the flash (default is
+@code{reset init})
@item @b{gdb-flash-erase-end}
@* After the GDB flash process has finished erasing the flash
@item @b{gdb-flash-write-start}
@* Before GDB writes to the flash
@item @b{gdb-flash-write-end}
-@* After GDB writes to the flash
+@* After GDB writes to the flash (default is @code{reset halt})
@item @b{gdb-start}
@* Before the target steps, gdb is trying to start/resume the target
@item @b{halted}
@* After all targets have resumed
@item @b{resumed}
@* Target has resumed
+@item @b{trace-config}
+@* After target hardware trace configuration was changed
@end itemize
@node Flash Commands
The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
+@deffn Command {flash read_bank} num filename offset length
+Read @var{length} bytes from the flash bank @var{num} starting at @var{offset}
+and write the contents to the binary @file{filename}.
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+
+@deffn Command {flash verify_bank} num filename offset
+Compare the contents of the binary file @var{filename} with the contents of the
+flash @var{num} starting at @var{offset}. Fails if the contents do not match.
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+
@deffn Command {flash write_image} [erase] [unlock] filename [offset] [type]
Write the image @file{filename} to the current target's flash bank(s).
+Only loadable sections from the image are written.
A relocation @var{offset} may be specified, in which case it is added
to the base address for each section in the image.
The file [@var{type}] can be specified
@end deffn
@anchor{program}
-@deffn Command {program} filename [verify] [reset] [offset]
+@deffn Command {program} filename [verify] [reset] [exit] [offset]
This is a helper script that simplifies using OpenOCD as a standalone
programmer. The only required parameter is @option{filename}, the others are optional.
@xref{Flash Programming}.
and allows driver-specific options and behaviors.
Some drivers also activate driver-specific commands.
+@deffn {Flash Driver} virtual
+This is a special driver that maps a previously defined bank to another
+address. All bank settings will be copied from the master physical bank.
+
+The @var{virtual} driver defines one mandatory parameters,
+
+@itemize
+@item @var{master_bank} The bank that this virtual address refers to.
+@end itemize
+
+So in the following example addresses 0xbfc00000 and 0x9fc00000 refer to
+the flash bank defined at address 0x1fc00000. Any cmds executed on
+the virtual banks are actually performed on the physical banks.
+@example
+flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME
+flash bank vbank0 virtual 0xbfc00000 0 0 0 $_TARGETNAME $_FLASHNAME
+flash bank vbank1 virtual 0x9fc00000 0 0 0 $_TARGETNAME $_FLASHNAME
+@end example
+@end deffn
+
@subsection External Flash
@deffn {Flash Driver} cfi
@c "cfi part_id" disabled
@end deffn
+@deffn {Flash Driver} jtagspi
+@cindex Generic JTAG2SPI driver
+@cindex SPI
+@cindex jtagspi
+@cindex bscan_spi
+Several FPGAs and CPLDs can retrieve their configuration (bitstream) from a
+SPI flash connected to them. To access this flash from the host, the device
+is first programmed with a special proxy bitstream that
+exposes the SPI flash on the device's JTAG interface. The flash can then be
+accessed through JTAG.
+
+Since signaling between JTAG and SPI is compatible, all that is required for
+a proxy bitstream is to connect TDI-MOSI, TDO-MISO, TCK-CLK and activate
+the flash chip select when the JTAG state machine is in SHIFT-DR. Such
+a bitstream for several Xilinx FPGAs can be found in
+@file{contrib/loaders/flash/fpga/xilinx_bscan_spi.py}. It requires migen
+(@url{http://github.com/m-labs/migen}) and a Xilinx toolchain to build.
+
+This flash bank driver requires a target on a JTAG tap and will access that
+tap directly. Since no support from the target is needed, the target can be a
+"testee" dummy. Since the target does not expose the flash memory
+mapping, target commands that would otherwise be expected to access the flash
+will not work. These include all @command{*_image} and
+@command{$target_name m*} commands as well as @command{program}. Equivalent
+functionality is available through the @command{flash write_bank},
+@command{flash read_bank}, and @command{flash verify_bank} commands.
+
+@itemize
+@item @var{ir} ... is loaded into the JTAG IR to map the flash as the JTAG DR.
+For the bitstreams generated from @file{xilinx_bscan_spi.py} this is the
+@var{USER1} instruction.
+@item @var{dr_length} ... is the length of the DR register. This will be 1 for
+@file{xilinx_bscan_spi.py} bitstreams and most other cases.
+@end itemize
+
+@example
+target create $_TARGETNAME testee -chain-position $_CHIPNAME.fpga
+set _XILINX_USER1 0x02
+set _DR_LENGTH 1
+flash bank $_FLASHNAME spi 0x0 0 0 0 $_TARGETNAME $_XILINX_USER1 $_DR_LENGTH
+@end example
+@end deffn
+
@deffn {Flash Driver} lpcspifi
@cindex NXP SPI Flash Interface
@cindex SPIFI
@end deffn
+@deffn {Flash Driver} mrvlqspi
+This driver supports QSPI flash controller of Marvell's Wireless
+Microcontroller platform.
+
+The flash size is autodetected based on the table of known JEDEC IDs
+hardcoded in the OpenOCD sources.
+
+@example
+flash bank $_FLASHNAME mrvlqspi 0x0 0 0 0 $_TARGETNAME 0x46010000
+@end example
+
+@end deffn
+
@subsection Internal Flash (Microcontrollers)
@deffn {Flash Driver} aduc702x
@end example
@end deffn
+@anchor{at91samd}
+@deffn {Flash Driver} at91samd
+@cindex at91samd
+All members of the ATSAMD, ATSAMR, ATSAML and ATSAMC microcontroller
+families from Atmel include internal flash and use ARM's Cortex-M0+ core.
+This driver uses the same cmd names/syntax as @xref{at91sam3}.
+
+@deffn Command {at91samd chip-erase}
+Issues a complete Flash erase via the Device Service Unit (DSU). This can be
+used to erase a chip back to its factory state and does not require the
+processor to be halted.
+@end deffn
+
+@deffn Command {at91samd set-security}
+Secures the Flash via the Set Security Bit (SSB) command. This prevents access
+to the Flash and can only be undone by using the chip-erase command which
+erases the Flash contents and turns off the security bit. Warning: at this
+time, openocd will not be able to communicate with a secured chip and it is
+therefore not possible to chip-erase it without using another tool.
+
+@example
+at91samd set-security enable
+@end example
+@end deffn
+
+@deffn Command {at91samd eeprom}
+Shows or sets the EEPROM emulation size configuration, stored in the User Row
+of the Flash. When setting, the EEPROM size must be specified in bytes and it
+must be one of the permitted sizes according to the datasheet. Settings are
+written immediately but only take effect on MCU reset. EEPROM emulation
+requires additional firmware support and the minumum EEPROM size may not be
+the same as the minimum that the hardware supports. Set the EEPROM size to 0
+in order to disable this feature.
+
+@example
+at91samd eeprom
+at91samd eeprom 1024
+@end example
+@end deffn
+
+@deffn Command {at91samd bootloader}
+Shows or sets the bootloader size configuration, stored in the User Row of the
+Flash. This is called the BOOTPROT region. When setting, the bootloader size
+must be specified in bytes and it must be one of the permitted sizes according
+to the datasheet. Settings are written immediately but only take effect on
+MCU reset. Setting the bootloader size to 0 disables bootloader protection.
+
+@example
+at91samd bootloader
+at91samd bootloader 16384
+@end example
+@end deffn
+
+@deffn Command {at91samd dsu_reset_deassert}
+This command releases internal reset held by DSU
+and prepares reset vector catch in case of reset halt.
+Command is used internally in event event reset-deassert-post.
+@end deffn
+
+@end deffn
+
@anchor{at91sam3}
@deffn {Flash Driver} at91sam3
@cindex at91sam3
This driver uses the same cmd names/syntax as @xref{at91sam3}.
@end deffn
+@deffn {Flash Driver} at91sam4l
+@cindex at91sam4l
+All members of the AT91SAM4L microcontroller family from
+Atmel include internal flash and use ARM's Cortex-M4 core.
+This driver uses the same cmd names/syntax as @xref{at91sam3}.
+
+The AT91SAM4L driver adds some additional commands:
+@deffn Command {at91sam4l smap_reset_deassert}
+This command releases internal reset held by SMAP
+and prepares reset vector catch in case of reset halt.
+Command is used internally in event event reset-deassert-post.
+@end deffn
+@end deffn
+
+@deffn {Flash Driver} atsamv
+@cindex atsamv
+All members of the ATSAMV, ATSAMS, and ATSAME families from
+Atmel include internal flash and use ARM's Cortex-M7 core.
+This driver uses the same cmd names/syntax as @xref{at91sam3}.
+@end deffn
+
@deffn {Flash Driver} at91sam7
All members of the AT91SAM7 microcontroller family from Atmel include
internal flash and use ARM7TDMI cores. The driver automatically
supported.}
@end deffn
+@deffn {Flash Driver} fm3
+All members of the FM3 microcontroller family from Fujitsu
+include internal flash and use ARM Cortex M3 cores.
+The @var{fm3} driver uses the @var{target} parameter to select the
+correct bank config, it can currently be one of the following:
+@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
+@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}.
+
+@example
+flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
+@end example
+@end deffn
+
@deffn {Flash Driver} lpc2000
-Most members of the LPC1700, LPC1800, LPC2000 and LPC4300 microcontroller
-families from NXP include internal flash and use Cortex-M3 (LPC1700, LPC1800),
-Cortex-M4 (LPC4300) or ARM7TDMI (LPC2000) cores.
+This is the driver to support internal flash of all members of the
+LPC11(x)00 and LPC1300 microcontroller families and most members of
+the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4000 and LPC54100
+microcontroller families from NXP.
@quotation Note
There are LPC2000 devices which are not supported by the @var{lpc2000}
@item @var{variant} ... required, may be
@option{lpc2000_v1} (older LPC21xx and LPC22xx)
@option{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx)
-@option{lpc1700} (LPC175x and LPC176x)
-or @option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
+@option{lpc1700} (LPC175x and LPC176x and LPC177x/8x)
+@option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and
LPC43x[2357])
+@option{lpc800} (LPC8xx)
+@option{lpc1100} (LPC11(x)xx and LPC13xx)
+@option{lpc1500} (LPC15xx)
+@option{lpc54100} (LPC541xx)
+@option{lpc4000} (LPC40xx)
+or @option{auto} - automatically detects flash variant and size for LPC11(x)00,
+LPC8xx, LPC13xx, LPC17xx and LPC40xx
@item @var{clock_kHz} ... the frequency, in kiloHertz,
at which the core is running
@item @option{calc_checksum} ... optional (but you probably want to provide this!),
@end deffn
@end deffn
+@deffn {Flash Driver} mdr
+This drivers handles the integrated NOR flash on Milandr Cortex-M
+based controllers. A known limitation is that the Info memory can't be
+read or verified as it's not memory mapped.
+
+@example
+flash bank <name> mdr <base> <size> \
+ 0 0 <target#> @var{type} @var{page_count} @var{sec_count}
+@end example
+
+@itemize @bullet
+@item @var{type} - 0 for main memory, 1 for info memory
+@item @var{page_count} - total number of pages
+@item @var{sec_count} - number of sector per page count
+@end itemize
+
+Example usage:
+@example
+if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{
+ flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \
+ 0 0 $_TARGETNAME 1 1 4
+@} else @{
+ flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \
+ 0 0 $_TARGETNAME 0 32 4
+@}
+@end example
+@end deffn
+
+@deffn {Flash Driver} nrf51
+All members of the nRF51 microcontroller families from Nordic Semiconductor
+include internal flash and use ARM Cortex-M0 core.
+
+@example
+flash bank $_FLASHNAME nrf51 0 0x00000000 0 0 $_TARGETNAME
+@end example
+
+Some nrf51-specific commands are defined:
+
+@deffn Command {nrf51 mass_erase}
+Erases the contents of the code memory and user information
+configuration registers as well. It must be noted that this command
+works only for chips that do not have factory pre-programmed region 0
+code.
+@end deffn
+
+@end deffn
+
@deffn {Flash Driver} ocl
-@emph{No idea what this is, other than using some arm7/arm9 core.}
+This driver is an implementation of the ``on chip flash loader''
+protocol proposed by Pavel Chromy.
+
+It is a minimalistic command-response protocol intended to be used
+over a DCC when communicating with an internal or external flash
+loader running from RAM. An example implementation for AT91SAM7x is
+available in @file{contrib/loaders/flash/at91sam7x/}.
@example
flash bank $_FLASHNAME ocl 0 0 0 0 $_TARGETNAME
@end deffn
@end deffn
-@deffn {Flash Driver} stellaris
-All members of the Stellaris LM3Sxxx microcontroller family from
-Texas Instruments
-include internal flash and use ARM Cortex M3 cores.
+@deffn {Flash Driver} psoc4
+All members of the PSoC 41xx/42xx microcontroller family from Cypress
+include internal flash and use ARM Cortex M0 cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
+
+Note: Erased internal flash reads as 00.
+System ROM of PSoC 4 does not implement erase of a flash sector.
+
+@example
+flash bank $_FLASHNAME psoc4 0 0 0 0 $_TARGETNAME
+@end example
+
+psoc4-specific commands
+@deffn Command {psoc4 flash_autoerase} num (on|off)
+Enables or disables autoerase mode for a flash bank.
+
+If flash_autoerase is off, use mass_erase before flash programming.
+Flash erase command fails if region to erase is not whole flash memory.
+
+If flash_autoerase is on, a sector is both erased and programmed in one
+system ROM call. Flash erase command is ignored.
+This mode is suitable for gdb load.
+
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+
+@deffn Command {psoc4 mass_erase} num
+Erases the contents of the flash memory, protection and security lock.
+
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
+@end deffn
+
+@deffn {Flash Driver} sim3x
+All members of the SiM3 microcontroller family from Silicon Laboratories
+include internal flash and use ARM Cortex M3 cores. It supports both JTAG
+and SWD interface.
+The @var{sim3x} driver tries to probe the device to auto detect the MCU.
+If this failes, it will use the @var{size} parameter as the size of flash bank.
+
+@example
+flash bank $_FLASHNAME sim3x 0 $_CPUROMSIZE 0 0 $_TARGETNAME
+@end example
+
+There are 2 commands defined in the @var{sim3x} driver:
+
+@deffn Command {sim3x mass_erase}
+Erases the complete flash. This is used to unlock the flash.
+And this command is only possible when using the SWD interface.
+@end deffn
+
+@deffn Command {sim3x lock}
+Lock the flash. To unlock use the @command{sim3x mass_erase} command.
+@end deffn
+@end deffn
+
+@deffn {Flash Driver} stellaris
+All members of the Stellaris LM3Sxxx, LM4x and Tiva C microcontroller
+families from Texas Instruments include internal flash. The driver
+automatically recognizes a number of these chips using the chip
+identification register, and autoconfigures itself.
@footnote{Currently there is a @command{stellaris mass_erase} command.
That seems pointless since the same effect can be had using the
standard @command{flash erase_address} command.}
flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME
@end example
-@deffn Command {stellaris recover bank_id}
-Performs the @emph{Recovering a "Locked" Device} procedure to
-restore the flash specified by @var{bank_id} and its associated
-nonvolatile registers to their factory default values (erased).
-This is the only way to remove flash protection or re-enable
-debugging if that capability has been disabled.
+@deffn Command {stellaris recover}
+Performs the @emph{Recovering a "Locked" Device} procedure to restore
+the flash and its associated nonvolatile registers to their factory
+default values (erased). This is the only way to remove flash
+protection or re-enable debugging if that capability has been
+disabled.
Note that the final "power cycle the chip" step in this procedure
must be performed by hand, since OpenOCD can't do it.
@deffn {Flash Driver} stm32lx
All members of the STM32L microcontroller families from ST Microelectronics
-include internal flash and use ARM Cortex-M3 cores.
+include internal flash and use ARM Cortex-M3 and Cortex-M0+ cores.
The driver automatically recognizes a number of these chips using
the chip identification register, and autoconfigures itself.
Note that some devices have been found that have a flash size register that contains
an invalid value, to workaround this issue you can override the probed value used by
-the flash driver.
+the flash driver. If you use 0 as the bank base address, it tells the
+driver to autodetect the bank location assuming you're configuring the
+second bank.
@example
-flash bank $_FLASHNAME stm32lx 0 0x20000 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32lx 0x08000000 0x20000 0 0 $_TARGETNAME
@end example
+
+Some stm32lx-specific commands are defined:
+
+@deffn Command {stm32lx mass_erase} num
+Mass erases the entire stm32lx device (all flash banks and EEPROM
+data). This is the only way to unlock a protected flash (unless RDP
+Level is 2 which can't be unlocked at all).
+The @var{num} parameter is a value shown by @command{flash banks}.
+@end deffn
@end deffn
@deffn {Flash Driver} str7x
which is either @code{STR71x}, @code{STR73x} or @code{STR75x}.
@example
-flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
+flash bank $_FLASHNAME str7x \
+ 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
@end example
@deffn Command {str7x disable_jtag} bank
@end deffn
-@deffn {Flash Driver} tms470
-Most members of the TMS470 microcontroller family from Texas Instruments
-include internal flash and use ARM7TDMI cores.
-This driver doesn't require the chip and bus width to be specified.
-
-Some tms470-specific commands are defined:
-
-@deffn Command {tms470 flash_keyset} key0 key1 key2 key3
-Saves programming keys in a register, to enable flash erase and write commands.
-@end deffn
-
-@deffn Command {tms470 osc_mhz} clock_mhz
-Reports the clock speed, which is used to calculate timings.
-@end deffn
-
-@deffn Command {tms470 plldis} (0|1)
-Disables (@var{1}) or enables (@var{0}) use of the PLL to speed up
-the flash clock.
-@end deffn
-@end deffn
-
-@deffn {Flash Driver} virtual
-This is a special driver that maps a previously defined bank to another
-address. All bank settings will be copied from the master physical bank.
+@deffn {Flash Driver} str9xpec
+@cindex str9xpec
-The @var{virtual} driver defines one mandatory parameters,
+Only use this driver for locking/unlocking the device or configuring the option bytes.
+Use the standard str9 driver for programming.
+Before using the flash commands the turbo mode must be enabled using the
+@command{str9xpec enable_turbo} command.
-@itemize
-@item @var{master_bank} The bank that this virtual address refers to.
-@end itemize
+Here is some background info to help
+you better understand how this driver works. OpenOCD has two flash drivers for
+the str9:
+@enumerate
+@item
+Standard driver @option{str9x} programmed via the str9 core. Normally used for
+flash programming as it is faster than the @option{str9xpec} driver.
+@item
+Direct programming @option{str9xpec} using the flash controller. This is an
+ISC compilant (IEEE 1532) tap connected in series with the str9 core. The str9
+core does not need to be running to program using this flash driver. Typical use
+for this driver is locking/unlocking the target and programming the option bytes.
+@end enumerate
-So in the following example addresses 0xbfc00000 and 0x9fc00000 refer to
-the flash bank defined at address 0x1fc00000. Any cmds executed on
-the virtual banks are actually performed on the physical banks.
-@example
-flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME
-flash bank vbank0 virtual 0xbfc00000 0 0 0 $_TARGETNAME $_FLASHNAME
-flash bank vbank1 virtual 0x9fc00000 0 0 0 $_TARGETNAME $_FLASHNAME
-@end example
-@end deffn
-
-@deffn {Flash Driver} fm3
-All members of the FM3 microcontroller family from Fujitsu
-include internal flash and use ARM Cortex M3 cores.
-The @var{fm3} driver uses the @var{target} parameter to select the
-correct bank config, it can currently be one of the following:
-@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
-@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}.
-
-@example
-flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
-@end example
-@end deffn
-
-@subsection str9xpec driver
-@cindex str9xpec
-
-Here is some background info to help
-you better understand how this driver works. OpenOCD has two flash drivers for
-the str9:
-@enumerate
-@item
-Standard driver @option{str9x} programmed via the str9 core. Normally used for
-flash programming as it is faster than the @option{str9xpec} driver.
-@item
-Direct programming @option{str9xpec} using the flash controller. This is an
-ISC compilant (IEEE 1532) tap connected in series with the str9 core. The str9
-core does not need to be running to program using this flash driver. Typical use
-for this driver is locking/unlocking the target and programming the option bytes.
-@end enumerate
-
-Before we run any commands using the @option{str9xpec} driver we must first disable
-the str9 core. This example assumes the @option{str9xpec} driver has been
-configured for flash bank 0.
+Before we run any commands using the @option{str9xpec} driver we must first disable
+the str9 core. This example assumes the @option{str9xpec} driver has been
+configured for flash bank 0.
@example
# assert srst, we do not want core running
# while accessing str9xpec flash driver
has been locked. Halting the core is not required for the @option{str9xpec} driver
as mentioned above, just issue the commands above manually or from a telnet prompt.
-@deffn {Flash Driver} str9xpec
-Only use this driver for locking/unlocking the device or configuring the option bytes.
-Use the standard str9 driver for programming.
-Before using the flash commands the turbo mode must be enabled using the
-@command{str9xpec enable_turbo} command.
-
Several str9xpec-specific commands are defined:
@deffn Command {str9xpec disable_turbo} num
@end deffn
+@deffn {Flash Driver} tms470
+Most members of the TMS470 microcontroller family from Texas Instruments
+include internal flash and use ARM7TDMI cores.
+This driver doesn't require the chip and bus width to be specified.
-@section mFlash
-
-@subsection mFlash Configuration
-@cindex mFlash Configuration
-
-@deffn {Config Command} {mflash bank} soc base RST_pin target
-Configures a mflash for @var{soc} host bank at
-address @var{base}.
-The pin number format depends on the host GPIO naming convention.
-Currently, the mflash driver supports s3c2440 and pxa270.
-
-Example for s3c2440 mflash where @var{RST pin} is GPIO B1:
-
-@example
-mflash bank $_FLASHNAME s3c2440 0x10000000 1b 0
-@end example
-
-Example for pxa270 mflash where @var{RST pin} is GPIO 43:
+Some tms470-specific commands are defined:
-@example
-mflash bank $_FLASHNAME pxa270 0x08000000 43 0
-@end example
+@deffn Command {tms470 flash_keyset} key0 key1 key2 key3
+Saves programming keys in a register, to enable flash erase and write commands.
@end deffn
-@subsection mFlash commands
-@cindex mFlash commands
-
-@deffn Command {mflash config pll} frequency
-Configure mflash PLL.
-The @var{frequency} is the mflash input frequency, in Hz.
-Issuing this command will erase mflash's whole internal nand and write new pll.
-After this command, mflash needs power-on-reset for normal operation.
-If pll was newly configured, storage and boot(optional) info also need to be update.
+@deffn Command {tms470 osc_mhz} clock_mhz
+Reports the clock speed, which is used to calculate timings.
@end deffn
-@deffn Command {mflash config boot}
-Configure bootable option.
-If bootable option is set, mflash offer the first 8 sectors
-(4kB) for boot.
+@deffn Command {tms470 plldis} (0|1)
+Disables (@var{1}) or enables (@var{0}) use of the PLL to speed up
+the flash clock.
@end deffn
-
-@deffn Command {mflash config storage}
-Configure storage information.
-For the normal storage operation, this information must be
-written.
@end deffn
-@deffn Command {mflash dump} num filename offset size
-Dump @var{size} bytes, starting at @var{offset} bytes from the
-beginning of the bank @var{num}, to the file named @var{filename}.
-@end deffn
+@deffn {Flash Driver} xmc4xxx
+All members of the XMC4xxx microcontroller family from Infineon.
+This driver does not require the chip and bus width to be specified.
-@deffn Command {mflash probe}
-Probe mflash.
-@end deffn
+Some xmc4xxx-specific commands are defined:
-@deffn Command {mflash write} num filename offset
-Write the binary file @var{filename} to mflash bank @var{num}, starting at
-@var{offset} bytes from the beginning of the bank.
+@deffn Command {xmc4xxx flash_password} bank_id passwd1 passwd2
+Saves flash protection passwords which are used to lock the user flash
@end deffn
-@node Flash Programming
-@chapter Flash Programming
-
-OpenOCD implements numerous ways to program the target flash, whether internal or external.
-Programming can be acheived by either using GDB @ref{programmingusinggdb,,Programming using GDB},
-or using the cmds given in @ref{flashprogrammingcommands,,Flash Programming Commands}.
-
-@*To simplify using the flash cmds directly a jimtcl script is available that handles the programming and verify stage.
-OpenOCD will program/verify/reset the target and shutdown.
-
-The script is executed as follows and by default the following actions will be peformed.
-@enumerate
-@item 'init' is executed.
-@item 'reset init' is called to reset and halt the target, any 'reset init' scripts are executed.
-@item @code{flash write_image} is called to erase and write any flash using the filename given.
-@item @code{verify_image} is called if @option{verify} parameter is given.
-@item @code{reset run} is called if @option{reset} parameter is given.
-@item OpenOCD is shutdown.
-@end enumerate
-
-An example of usage is given below. @xref{program}.
-
-@example
-# program and verify using elf/hex/s19. verify and reset
-# are optional parameters
-openocd -f board/stm32f3discovery.cfg \
- -c "program filename.elf verify reset"
+@deffn Command {xmc4xxx flash_unprotect} bank_id user_level[0-1]
+Removes Flash write protection from the selected user bank
+@end deffn
-# binary files need the flash address passing
-openocd -f board/stm32f3discovery.cfg \
- -c "program filename.bin 0x08000000"
-@end example
+@end deffn
-@node NAND Flash Commands
-@chapter NAND Flash Commands
+@section NAND Flash Commands
@cindex NAND
Compared to NOR or SPI flash, NAND devices are inexpensive
modules with two smaller chips and individual chipselect lines.
@anchor{nandconfiguration}
-@section NAND Configuration Commands
+@subsection NAND Configuration Commands
@cindex NAND configuration
NAND chips must be declared in configuration scripts,
it with most other NAND commands.
@end deffn
-@section Erasing, Reading, Writing to NAND Flash
+@subsection Erasing, Reading, Writing to NAND Flash
@deffn Command {nand dump} num filename offset length [oob_option]
@cindex NAND reading
be removed in a future release.
@end deffn
-@section Other NAND commands
+@subsection Other NAND commands
@cindex NAND other commands
@deffn Command {nand check_bad_blocks} num [offset length]
@end deffn
@anchor{nanddriverlist}
-@section NAND Driver List
+@subsection NAND Driver List
As noted above, the @command{nand device} command allows
driver-specific options and behaviors.
Some controllers also activate controller-specific commands.
change any behavior.
@end deffn
+@section mFlash
+
+@subsection mFlash Configuration
+@cindex mFlash Configuration
+
+@deffn {Config Command} {mflash bank} soc base RST_pin target
+Configures a mflash for @var{soc} host bank at
+address @var{base}.
+The pin number format depends on the host GPIO naming convention.
+Currently, the mflash driver supports s3c2440 and pxa270.
+
+Example for s3c2440 mflash where @var{RST pin} is GPIO B1:
+
+@example
+mflash bank $_FLASHNAME s3c2440 0x10000000 1b 0
+@end example
+
+Example for pxa270 mflash where @var{RST pin} is GPIO 43:
+
+@example
+mflash bank $_FLASHNAME pxa270 0x08000000 43 0
+@end example
+@end deffn
+
+@subsection mFlash commands
+@cindex mFlash commands
+
+@deffn Command {mflash config pll} frequency
+Configure mflash PLL.
+The @var{frequency} is the mflash input frequency, in Hz.
+Issuing this command will erase mflash's whole internal nand and write new pll.
+After this command, mflash needs power-on-reset for normal operation.
+If pll was newly configured, storage and boot(optional) info also need to be update.
+@end deffn
+
+@deffn Command {mflash config boot}
+Configure bootable option.
+If bootable option is set, mflash offer the first 8 sectors
+(4kB) for boot.
+@end deffn
+
+@deffn Command {mflash config storage}
+Configure storage information.
+For the normal storage operation, this information must be
+written.
+@end deffn
+
+@deffn Command {mflash dump} num filename offset size
+Dump @var{size} bytes, starting at @var{offset} bytes from the
+beginning of the bank @var{num}, to the file named @var{filename}.
+@end deffn
+
+@deffn Command {mflash probe}
+Probe mflash.
+@end deffn
+
+@deffn Command {mflash write} num filename offset
+Write the binary file @var{filename} to mflash bank @var{num}, starting at
+@var{offset} bytes from the beginning of the bank.
+@end deffn
+
+@node Flash Programming
+@chapter Flash Programming
+
+OpenOCD implements numerous ways to program the target flash, whether internal or external.
+Programming can be acheived by either using GDB @ref{programmingusinggdb,,Programming using GDB},
+or using the cmds given in @ref{flashprogrammingcommands,,Flash Programming Commands}.
+
+@*To simplify using the flash cmds directly a jimtcl script is available that handles the programming and verify stage.
+OpenOCD will program/verify/reset the target and optionally shutdown.
+
+The script is executed as follows and by default the following actions will be peformed.
+@enumerate
+@item 'init' is executed.
+@item 'reset init' is called to reset and halt the target, any 'reset init' scripts are executed.
+@item @code{flash write_image} is called to erase and write any flash using the filename given.
+@item @code{verify_image} is called if @option{verify} parameter is given.
+@item @code{reset run} is called if @option{reset} parameter is given.
+@item OpenOCD is shutdown if @option{exit} parameter is given.
+@end enumerate
+
+An example of usage is given below. @xref{program}.
+
+@example
+# program and verify using elf/hex/s19. verify and reset
+# are optional parameters
+openocd -f board/stm32f3discovery.cfg \
+ -c "program filename.elf verify reset exit"
+
+# binary files need the flash address passing
+openocd -f board/stm32f3discovery.cfg \
+ -c "program filename.bin exit 0x08000000"
+@end example
+
@node PLD/FPGA Commands
@chapter PLD/FPGA Commands
@cindex PLD
definition command, and may also define commands usable only with
that particular type of PLD.
-@deffn {FPGA Driver} virtex2
+@deffn {FPGA Driver} virtex2 [no_jstart]
Virtex-II is a family of FPGAs sold by Xilinx.
It supports the IEEE 1532 standard for In-System Configuration (ISC).
-No driver-specific PLD definition options are used,
-and one driver-specific command is defined.
+
+If @var{no_jstart} is non-zero, the JSTART instruction is not used after
+loading the bitstream. While required for Series2, Series3, and Series6, it
+breaks bitstream loading on Series7.
@deffn {Command} {virtex2 read_stat} num
Reads and displays the Virtex-II status register (STAT)
(@command{script} command and @command{target_name} configuration).
@end deffn
-@deffn Command shutdown
-Close the OpenOCD daemon, disconnecting all clients (GDB, telnet, other).
+@deffn Command shutdown [@option{error}]
+Close the OpenOCD daemon, disconnecting all clients (GDB, telnet,
+other). If option @option{error} is used, OpenOCD will return a
+non-zero exit code to the parent process.
@end deffn
@anchor{debuglevel}
by using @command{targets} command with the name of the
target which should become current.
-@deffn Command reg [(number|name) [value]]
+@deffn Command reg [(number|name) [(value|'force')]]
Access a single register by @var{number} or by its @var{name}.
The target must generally be halted before access to CPU core
registers is allowed. Depending on the hardware, some other
are flagged as such.
@emph{With number/name}: display that register's value.
+Use @var{force} argument to read directly from the target,
+bypassing any internal cache.
@emph{With both number/name and value}: set register's value.
Writes may be held in a writeback cache internal to OpenOCD,
proc load_image_bin @{fname foffset address length @} @{
# Load data from fname filename at foffset offset to
# target at address. Load at most length bytes.
- load_image $fname [expr $address - $foffset] bin $address $length
+ load_image $fname [expr $address - $foffset] bin \
+ $address $length
@}
@end example
@end deffn
@section Misc Commands
@cindex profiling
-@deffn Command {profile} seconds filename
+@deffn Command {profile} seconds filename [start end]
Profiling samples the CPU's program counter as quickly as possible,
which is useful for non-intrusive stochastic profiling.
-Saves up to 10000 sampines in @file{filename} using ``gmon.out'' format.
+Saves up to 10000 samples in @file{filename} using ``gmon.out''
+format. Optional @option{start} and @option{end} parameters allow to
+limit the address range.
@end deffn
@deffn Command {version}
Defaulting to 0.
@end deffn
+@deffn Command {dap ti_be_32_quirks} [@option{enable}]
+Set/get quirks mode for TI TMS450/TMS570 processors
+Disabled by default
+@end deffn
+
+
+@subsection ARMv7-A specific commands
+@cindex Cortex-A
+
+@deffn Command {cortex_a cache_info}
+display information about target caches
+@end deffn
+
+@deffn Command {cortex_a dbginit}
+Initialize core debug
+Enables debug by unlocking the Software Lock and clearing sticky powerdown indications
+@end deffn
+
+@deffn Command {cortex_a smp_off}
+Disable SMP mode
+@end deffn
+
+@deffn Command {cortex_a smp_on}
+Enable SMP mode
+@end deffn
+
+@deffn Command {cortex_a smp_gdb} [core_id]
+Display/set the current core displayed in GDB
+@end deffn
+
+@deffn Command {cortex_a maskisr} [@option{on}|@option{off}]
+Selects whether interrupts will be processed when single stepping
+@end deffn
+
+@deffn Command {cache_config l2x} [base way]
+configure l2x cache
+@end deffn
+
+
+@subsection ARMv7-R specific commands
+@cindex Cortex-R
+
+@deffn Command {cortex_r dbginit}
+Initialize core debug
+Enables debug by unlocking the Software Lock and clearing sticky powerdown indications
+@end deffn
+
+@deffn Command {cortex_r maskisr} [@option{on}|@option{off}]
+Selects whether interrupts will be processed when single stepping
+@end deffn
+
+
+@subsection ARMv7-M specific commands
+@cindex tracing
+@cindex SWO
+@cindex SWV
+@cindex TPIU
+@cindex ITM
+@cindex ETM
+
+@deffn Command {tpiu config} (@option{disable} | ((@option{external} | @option{internal (@var{filename} | -)}) @
+ (@option{sync @var{port_width}} | ((@option{manchester} | @option{uart}) @var{formatter_enable})) @
+ @var{TRACECLKIN_freq} [@var{trace_freq}]))
+
+ARMv7-M architecture provides several modules to generate debugging
+information internally (ITM, DWT and ETM). Their output is directed
+through TPIU to be captured externally either on an SWO pin (this
+configuration is called SWV) or on a synchronous parallel trace port.
+
+This command configures the TPIU module of the target and, if internal
+capture mode is selected, starts to capture trace output by using the
+debugger adapter features.
+
+Some targets require additional actions to be performed in the
+@b{trace-config} handler for trace port to be activated.
+
+Command options:
+@itemize @minus
+@item @option{disable} disable TPIU handling;
+@item @option{external} configure TPIU to let user capture trace
+output externally (with an additional UART or logic analyzer hardware);
+@item @option{internal @var{filename}} configure TPIU and debug adapter to
+gather trace data and append it to @var{filename} (which can be
+either a regular file or a named pipe);
+@item @option{internal -} configure TPIU and debug adapter to
+gather trace data, but not write to any file. Useful in conjunction with the @command{tcl_trace} command;
+@item @option{sync @var{port_width}} use synchronous parallel trace output
+mode, and set port width to @var{port_width};
+@item @option{manchester} use asynchronous SWO mode with Manchester
+coding;
+@item @option{uart} use asynchronous SWO mode with NRZ (same as
+regular UART 8N1) coding;
+@item @var{formatter_enable} is @option{on} or @option{off} to enable
+or disable TPIU formatter which needs to be used when both ITM and ETM
+data is to be output via SWO;
+@item @var{TRACECLKIN_freq} this should be specified to match target's
+current TRACECLKIN frequency (usually the same as HCLK);
+@item @var{trace_freq} trace port frequency. Can be omitted in
+internal mode to let the adapter driver select the maximum supported
+rate automatically.
+@end itemize
+
+Example usage:
+@enumerate
+@item STM32L152 board is programmed with an application that configures
+PLL to provide core clock with 24MHz frequency; to use ITM output it's
+enough to:
+@example
+#include <libopencm3/cm3/itm.h>
+ ...
+ ITM_STIM8(0) = c;
+ ...
+@end example
+(the most obvious way is to use the first stimulus port for printf,
+for that this ITM_STIM8 assignment can be used inside _write(); to make it
+blocking to avoid data loss, add @code{while (!(ITM_STIM8(0) &
+ITM_STIM_FIFOREADY));});
+@item An FT2232H UART is connected to the SWO pin of the board;
+@item Commands to configure UART for 12MHz baud rate:
+@example
+$ setserial /dev/ttyUSB1 spd_cust divisor 5
+$ stty -F /dev/ttyUSB1 38400
+@end example
+(FT2232H's base frequency is 60MHz, spd_cust allows to alias 38400
+baud with our custom divisor to get 12MHz)
+@item @code{itmdump -f /dev/ttyUSB1 -d1}
+@item OpenOCD invocation line:
+@example
+openocd -f interface/stlink-v2-1.cfg \
+ -c "transport select hla_swd" \
+ -f target/stm32l1.cfg \
+ -c "tpiu config external uart off 24000000 12000000"
+@end example
+@end enumerate
+@end deffn
+
+@deffn Command {itm port} @var{port} (@option{0}|@option{1}|@option{on}|@option{off})
+Enable or disable trace output for ITM stimulus @var{port} (counting
+from 0). Port 0 is enabled on target creation automatically.
+@end deffn
+
+@deffn Command {itm ports} (@option{0}|@option{1}|@option{on}|@option{off})
+Enable or disable trace output for all ITM stimulus ports.
+@end deffn
+
@subsection Cortex-M specific commands
@cindex Cortex-M
@xref{targetevents,,Target Events}.
@end deffn
+@section Intel Architecture
+
+Intel Quark X10xx is the first product in the Quark family of SoCs. It is an IA-32
+(Pentium x86 ISA) compatible SoC. The core CPU in the X10xx is codenamed Lakemont.
+Lakemont version 1 (LMT1) is used in X10xx. The CPU TAP (Lakemont TAP) is used for
+software debug and the CLTAP is used for SoC level operations.
+Useful docs are here: https://communities.intel.com/community/makers/documentation
+@itemize
+@item Intel Quark SoC X1000 OpenOCD/GDB/Eclipse App Note (web search for doc num 330015)
+@item Intel Quark SoC X1000 Debug Operations User Guide (web search for doc num 329866)
+@item Intel Quark SoC X1000 Datasheet (web search for doc num 329676)
+@end itemize
+
+@subsection x86 32-bit specific commands
+The three main address spaces for x86 are memory, I/O and configuration space.
+These commands allow a user to read and write to the 64Kbyte I/O address space.
+
+@deffn Command {x86_32 idw} address
+Display the contents of a 32-bit I/O port from address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 idh} address
+Display the contents of a 16-bit I/O port from address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 idb} address
+Display the contents of a 8-bit I/O port from address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 iww} address
+Write the contents of a 32-bit I/O port to address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 iwh} address
+Write the contents of a 16-bit I/O port to address range 0x0000 - 0xffff.
+@end deffn
+
+@deffn Command {x86_32 iwb} address
+Write the contents of a 8-bit I/O port to address range 0x0000 - 0xffff.
+@end deffn
+
@section OpenRISC Architecture
The OpenRISC CPU is a soft core. It is used in a programmable SoC which can be
There is often a need to stress-test random access memory (RAM) for
errors. OpenOCD comes with a Tcl implementation of well-known memory
-testing procedures allowing to detect all sorts of issues with
+testing procedures allowing the detection of all sorts of issues with
electrical wiring, defective chips, PCB layout and other common
hardware problems.
-To use them you usually need to initialise your RAM controller first,
+To use them, you usually need to initialise your RAM controller first;
consult your SoC's documentation to get the recommended list of
register operations and translate them to the corresponding
@command{mww}/@command{mwb} commands.
@section Firmware recovery helpers
@cindex Firmware recovery
-OpenOCD includes an easy-to-use script to faciliate mass-market
+OpenOCD includes an easy-to-use script to facilitate mass-market
devices recovery with JTAG.
For quickstart instructions run:
@node TFTP
@chapter TFTP
@cindex TFTP
-If OpenOCD runs on an embedded host(as ZY1000 does), then TFTP can
+If OpenOCD runs on an embedded host (as ZY1000 does), then TFTP can
be used to access files on PCs (either the developer's PC or some other PC).
The way this works on the ZY1000 is to prefix a filename by
@node GDB and OpenOCD
@chapter GDB and OpenOCD
@cindex GDB
-OpenOCD complies with the remote gdbserver protocol, and as such can be used
+OpenOCD complies with the remote gdbserver protocol and, as such, can be used
to debug remote targets.
Setting up GDB to work with OpenOCD can involve several components:
With the remote protocol, GDB sessions start a little differently
than they do when you're debugging locally.
-Here's an examples showing how to start a debug session with a
+Here's an example showing how to start a debug session with a
small ARM program.
In this case the program was linked to be loaded into SRAM on a Cortex-M3.
Most programs would be written into flash (address 0) and run from there.
that the OpenOCD option @command{gdb_breakpoint_override} is not required when
using a memory map. @xref{gdbbreakpointoverride,,gdb_breakpoint_override}.
-To view the configured memory map in GDB, use the GDB command @option{info mem}
+To view the configured memory map in GDB, use the GDB command @option{info mem}.
All other unassigned addresses within GDB are treated as RAM.
GDB 6.8 and higher set any memory area not in the memory map as inaccessible.
@item @option{linux}
@item @option{ChibiOS}
@item @option{embKernel}
+@item @option{mqx}
@end itemize
@quotation Note
-Before an RTOS can be detected it must export certain symbols otherwise it cannot be used by
-OpenOCD. Below is a list of the required symbols for each supported RTOS.
+Before an RTOS can be detected, it must export certain symbols; otherwise, it cannot
+be used by OpenOCD. Below is a list of the required symbols for each supported RTOS.
@end quotation
@table @code
@item ThreadX symbols
_tx_thread_current_ptr, _tx_thread_created_ptr, _tx_thread_created_count.
@item FreeRTOS symbols
+@c The following is taken from recent texinfo to provide compatibility
+@c with ancient versions that do not support @raggedright
+@tex
+\begingroup
+\rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
pxCurrentTCB, pxReadyTasksLists, xDelayedTaskList1, xDelayedTaskList2,
pxDelayedTaskList, pxOverflowDelayedTaskList, xPendingReadyList,
-xTasksWaitingTermination, xSuspendedTaskList, uxCurrentNumberOfTasks, uxTopUsedPriority.
+uxCurrentNumberOfTasks, uxTopUsedPriority.
+\par
+\endgroup
+@end tex
@item linux symbols
init_task.
@item ChibiOS symbols
@item embKernel symbols
Rtos::sCurrentTask, Rtos::sListReady, Rtos::sListSleep,
Rtos::sListSuspended, Rtos::sMaxPriorities, Rtos::sCurrentTaskCount.
+@item mqx symbols
+_mqx_kernel_data, MQX_init_struct.
@end table
For most RTOS supported the above symbols will be exported by default. However for
-some, eg. FreeRTOS @option{xTasksWaitingTermination} is only exported
-if @option{INCLUDE_vTaskDelete} is defined during the build.
+some, eg. FreeRTOS, extra steps must be taken.
+
+These RTOSes may require additional OpenOCD-specific file to be linked
+along with the project:
+
+@table @code
+@item FreeRTOS
+contrib/rtos-helpers/FreeRTOS-openocd.c
+@end table
@node Tcl Scripting API
@chapter Tcl Scripting API
@cindex Tcl scripts
@section API rules
-The commands are stateless. E.g. the telnet command line has a concept
-of currently active target, the Tcl API proc's take this sort of state
-information as an argument to each proc.
+Tcl commands are stateless; e.g. the @command{telnet} command has
+a concept of currently active target, the Tcl API proc's take this sort
+of state information as an argument to each proc.
There are three main types of return values: single value, name value
pair list and lists.
Name value pair. The proc 'foo' below returns a name/value pair
list.
-@verbatim
-
- > set foo(me) Duane
- > set foo(you) Oyvind
- > set foo(mouse) Micky
- > set foo(duck) Donald
+@example
+> set foo(me) Duane
+> set foo(you) Oyvind
+> set foo(mouse) Micky
+> set foo(duck) Donald
+@end example
If one does this:
- > set foo
+@example
+> set foo
+@end example
The result is:
- me Duane you Oyvind mouse Micky duck Donald
+@example
+me Duane you Oyvind mouse Micky duck Donald
+@end example
Thus, to get the names of the associative array is easy:
- foreach { name value } [set foo] {
- puts "Name: $name, Value: $value"
- }
+@verbatim
+foreach { name value } [set foo] {
+ puts "Name: $name, Value: $value"
+}
@end verbatim
-Lists returned must be relatively small. Otherwise a range
+Lists returned should be relatively small. Otherwise, a range
should be passed in to the proc in question.
@section Internal low-level Commands
-By low-level, the intent is a human would not directly use these commands.
+By "low-level," we mean commands that a human would typically not
+invoke directly.
-Low-level commands are (should be) prefixed with "ocd_", e.g.
+Some low-level commands need to be prefixed with "ocd_"; e.g.
@command{ocd_flash_banks}
-is the low level API upon which @command{flash banks} is implemented.
+is the low-level API upon which @command{flash banks} is implemented.
@itemize @bullet
@item @b{mem2array} <@var{varname}> <@var{width}> <@var{addr}> <@var{nelems}>
@item @b{ocd_flash_banks} <@var{driver}> <@var{base}> <@var{size}> <@var{chip_width}> <@var{bus_width}> <@var{target}> [@option{driver options} ...]
Return information about the flash banks
+
+@item @b{capture} <@var{command}>
+
+Run <@var{command}> and return full log output that was produced during
+its execution. Example:
+
+@example
+> capture "reset init"
+@end example
+
@end itemize
OpenOCD commands can consist of two words, e.g. "flash banks". The
@item @b{cygwin} Running under Cygwin
@item @b{darwin} Darwin (Mac-OS) is the underlying operating sytem.
@item @b{freebsd} Running under FreeBSD
+@item @b{openbsd} Running under OpenBSD
+@item @b{netbsd} Running under NetBSD
@item @b{linux} Linux is the underlying operating sytem
@item @b{mingw32} Running under MingW32
@item @b{winxx} Built using Microsoft Visual Studio
+@item @b{ecos} Running under eCos
@item @b{other} Unknown, none of the above.
@end itemize
is jim, not real tcl).
@end quotation
+@section Tcl RPC server
+@cindex RPC
+
+OpenOCD provides a simple RPC server that allows to run arbitrary Tcl
+commands and receive the results.
+
+To access it, your application needs to connect to a configured TCP port
+(see @command{tcl_port}). Then it can pass any string to the
+interpreter terminating it with @code{0x1a} and wait for the return
+value (it will be terminated with @code{0x1a} as well). This can be
+repeated as many times as desired without reopening the connection.
+
+Remember that most of the OpenOCD commands need to be prefixed with
+@code{ocd_} to get the results back. Sometimes you might also need the
+@command{capture} command.
+
+See @file{contrib/rpc_examples/} for specific client implementations.
+
+@section Tcl RPC server notifications
+@cindex RPC Notifications
+
+Notifications are sent asynchronously to other commands being executed over
+the RPC server, so the port must be polled continuously.
+
+Target event, state and reset notifications are emitted as Tcl associative arrays
+in the following format.
+
+@verbatim
+type target_event event [event-name]
+type target_state state [state-name]
+type target_reset mode [reset-mode]
+@end verbatim
+
+@deffn {Command} tcl_notifications [on/off]
+Toggle output of target notifications to the current Tcl RPC server.
+Only available from the Tcl RPC server.
+Defaults to off.
+
+@end deffn
+
+@section Tcl RPC server trace output
+@cindex RPC trace output
+
+Trace data is sent asynchronously to other commands being executed over
+the RPC server, so the port must be polled continuously.
+
+Target trace data is emitted as a Tcl associative array in the following format.
+
+@verbatim
+type target_trace data [trace-data-hex-encoded]
+@end verbatim
+
+@deffn {Command} tcl_trace [on/off]
+Toggle output of target trace data to the current Tcl RPC server.
+Only available from the Tcl RPC server.
+Defaults to off.
+
+See an example application here:
+@url{https://github.com/apmorton/OpenOcdTraceUtil} [OpenOcdTraceUtil]
+
+@end deffn
+
@node FAQ
@chapter FAQ
@cindex faq
Code Review / openocd.git / blobdiff