docs: Fix incorrect -rtos option values

[openocd.git] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index e05ebce2a60487812db7ac19df390591451a1e40..0c0b9519feea4cec5fbe9d1bc45b816a9ea0b595 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -426,7 +426,7 @@ Raisonance has an adapter called @b{RLink}.  It exists in a stripped-down form o
 
 @section USB ST-LINK based
 ST Micro has an adapter called @b{ST-LINK}.
-They only works with ST Micro chips, notably STM32 and STM8.
+They only work with ST Micro chips, notably STM32 and STM8.
 
 @itemize @bullet
 @item @b{ST-LINK}
@@ -439,7 +439,7 @@ They only works with ST Micro chips, notably STM32 and STM8.
 
 For info the original ST-LINK enumerates using the mass storage usb class, however
 it's implementation is completely broken. The result is this causes issues under linux.
-The simplest solution is to get linux to ignore the ST-LINK using one of the following method's:
+The simplest solution is to get linux to ignore the ST-LINK using one of the following methods:
 @itemize @bullet
 @item modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:i
 @item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf
@@ -448,25 +448,31 @@ The simplest solution is to get linux to ignore the ST-LINK using one of the fol
 @section USB Other
 @itemize @bullet
 @item @b{USBprog}
-@* Link: @url{http://www.embedded-projects.net/usbprog} - which uses an Atmel MEGA32 and a UBN9604
+@* Link: @url{http://shop.embedded-projects.net/} - which uses an Atmel MEGA32 and a UBN9604
 
 @item @b{USB - Presto}
 @* Link: @url{http://tools.asix.net/prg_presto.htm}
 
 @item @b{Versaloon-Link}
-@* Link: @url{http://www.simonqian.com/en/Versaloon}
+@* Link: @url{http://www.versaloon.com}
 
 @item @b{ARM-JTAG-EW}
 @* Link: @url{http://www.olimex.com/dev/arm-jtag-ew.html}
 
 @item @b{Buspirate}
 @* Link: @url{http://dangerousprototypes.com/bus-pirate-manual/}
+
+@item @b{opendous}
+@* Link: @url{http://code.google.com/p/opendous-jtag/}
+
+@item @b{estick}
+@* Link: @url{http://code.google.com/p/estick-jtag/}
 @end itemize
 
 @section IBM PC Parallel Printer Port Based
 
 The two well known ``JTAG Parallel Ports'' cables are the Xilnx DLC5
-and the MacGraigor Wiggler. There are many clones and variations of
+and the Macraigor Wiggler. There are many clones and variations of
 these on the market.
 
 Note that parallel ports are becoming much less common, so if you
@@ -489,8 +495,7 @@ produced, PDF schematics are easily found and it is easy to make.
 @* Link: @url{http://www.gateworks.com/products/avila_accessories/gw16042.php}
 
 @item @b{Wiggler2}
-@*@uref{http://www.ccac.rwth-aachen.de/@/~michaels/@/index.php/hardware/@/armjtag,
-Improved parallel-port wiggler-style JTAG adapter}
+@* Link: @url{http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag}
 
 @item @b{Wiggler_ntrst_inverted}
 @* Yet another variation - See the source code, src/jtag/parport.c
@@ -513,8 +518,7 @@ Improved parallel-port wiggler-style JTAG adapter}
 
 @item @b{flashlink}
 @* From ST Microsystems;
-@uref{http://www.st.com/stonline/@/products/literature/um/7889.pdf,
-FlashLINK JTAG programing cable for PSD and uPSD}
+@* Link: @url{http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/DM00039500.pdf}
 
 @end itemize
 
@@ -2673,6 +2677,30 @@ which are not currently documented here.
 
 @deffn {Interface Driver} {stlink}
 ST Micro ST-LINK adapter.
+
+@deffn {Config Command} {stlink_device_desc} description
+Currently Not Supported.
+@end deffn
+
+@deffn {Config Command} {stlink_serial} serial
+Currently Not Supported.
+@end deffn
+
+@deffn {Config Command} {stlink_layout} (@option{sg}|@option{usb})
+Specifies the stlink layout to use.
+@end deffn
+
+@deffn {Config Command} {stlink_vid_pid} vid pid
+The vendor ID and product ID of the STLINK device.
+@end deffn
+
+@deffn {Config Command} {stlink_api} api_level
+Manually sets the stlink api used, valid options are 1 or 2.
+@end deffn
+@end deffn
+
+@deffn {Interface Driver} {opendous}
+opendous-jtag is a freely programmable USB adapter.
 @end deffn
 
 @deffn {Interface Driver} {ZY1000}
@@ -3912,6 +3940,10 @@ base @var{address} to be used when an MMU is active.
 The value should normally correspond to a static mapping for the
 @code{-work-area-phys} address, set up by the current operating system.
 
+@item @code{-rtos} @var{rtos_type} -- enable rtos support for target,
+@var{rtos_type} can be one of @option{auto}|@option{eCos}|@option{ThreadX}|
+@option{FreeRTOS}|@option{linux}.
+
 @end itemize
 @end deffn
 
@@ -4540,6 +4572,7 @@ flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME
 @end example
 @end deffn
 
+@anchor{at91sam3}
 @deffn {Flash Driver} at91sam3
 @cindex at91sam3
 All members of the AT91SAM3 microcontroller family from
@@ -4604,6 +4637,13 @@ This command shows/sets the slow clock frequency used in the
 @end deffn
 @end deffn
 
+@deffn {Flash Driver} at91sam4
+@cindex at91sam4
+All members of the AT91SAM4 microcontroller family from
+Atmel include internal flash and use ARM's Cortex-M4 core.
+This driver uses the same cmd names/syntax as @xref{at91sam3}.
+@end deffn
+
 @deffn {Flash Driver} at91sam7
 All members of the AT91SAM7 microcontroller family from Atmel include
 internal flash and use ARM7TDMI cores.  The driver automatically