flash/nor: Add support for TI CC26xx/CC13xx flash
[openocd.git] / contrib / loaders / flash / cc26xx / flashloader.c
diff --git a/contrib/loaders/flash/cc26xx/flashloader.c b/contrib/loaders/flash/cc26xx/flashloader.c
new file mode 100644 (file)
index 0000000..2eaf618
--- /dev/null
@@ -0,0 +1,177 @@
+/******************************************************************************
+*
+* Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+*  Redistributions of source code must retain the above copyright
+*  notice, this list of conditions and the following disclaimer.
+*
+*  Redistributions in binary form must reproduce the above copyright
+*  notice, this list of conditions and the following disclaimer in the
+*  documentation and/or other materials provided with the
+*  distribution.
+*
+*  Neither the name of Texas Instruments Incorporated nor the names of
+*  its contributors may be used to endorse or promote products derived
+*  from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "flashloader.h"
+#include "flash.h"
+
+/* Array holding erased state of the flash sectors. */
+static bool g_is_erased[FLASH_MAX_SECTOR_COUNT];
+
+extern uint8_t g_retain_buf[];
+
+uint32_t flashloader_init(struct flash_params *params, uint8_t *buf1,
+       uint8_t *buf2)
+{
+       /* Initialize params buffers */
+       memset((void *)params, 0, 2 * sizeof(struct flash_params));
+       params[0].buf_addr = (uint32_t)buf1;
+       params[1].buf_addr = (uint32_t)buf2;
+
+       /* Mark all sectors at "not erased" */
+       memset(g_is_erased, false, sizeof(g_is_erased));
+
+       return STATUS_OK;
+}
+
+uint32_t flashloader_erase_and_program(uint8_t *src, uint32_t address,
+       uint32_t byte_count)
+{
+       if (byte_count > BUFFER_LEN)
+               return STATUS_FAILED_INVALID_ARGUMENTS;
+
+       /* Erase affected sectors */
+       uint32_t status = flashloader_erase_sectors(address, byte_count);
+
+       if (status != STATUS_OK)
+               return status;
+
+       /* Program data */
+       status = flashloader_program(src, address, byte_count);
+
+       return status;
+}
+
+uint32_t flashloader_program_with_retain(uint8_t *src, uint32_t address,
+       uint32_t byte_count)
+{
+#if (BUFFER_LEN > FLASH_ERASE_SIZE)
+#error Buffer size cannot be larger than the flash sector size!
+#endif
+
+       uint32_t first_sector_idx;
+       uint32_t last_sector_idx;
+       uint32_t status = STATUS_OK;
+       uint32_t i;
+
+       first_sector_idx = flashloader_address_to_sector(address);
+       last_sector_idx = flashloader_address_to_sector(address + byte_count - 1);
+
+       /* Mark all sectors as "not erased" before starting */
+       memset(g_is_erased, false, sizeof(g_is_erased));
+
+       uint32_t sec_offset = address % FLASH_ERASE_SIZE;
+       uint32_t curr_count;
+       uint32_t src_offset = 0;
+
+       for (i = first_sector_idx; i <= last_sector_idx; i++) {
+
+               /* Chop off at sector boundary if data goes into the next sector. */
+               curr_count = byte_count;
+               if ((address + byte_count) > ((i+1) * FLASH_ERASE_SIZE))
+                       curr_count -= (address + byte_count) % FLASH_ERASE_SIZE;
+
+               /* Copy flash sector to retain buffer */
+               memcpy(g_retain_buf, (void *)(i * FLASH_ERASE_SIZE), FLASH_ERASE_SIZE);
+
+               /* Copy data buffer to retain buffer */
+               memcpy(&g_retain_buf[sec_offset], &src[src_offset], curr_count);
+
+               /* Erase and program from retain buffer */
+               status = flashloader_erase_and_program(g_retain_buf,
+                                       (i * FLASH_ERASE_SIZE), FLASH_ERASE_SIZE);
+               if (status != STATUS_OK)
+                       return status;
+
+               address += curr_count;
+               sec_offset = address % FLASH_ERASE_SIZE;
+               byte_count -= curr_count;
+               src_offset += curr_count;
+       }
+
+       return status;
+}
+
+uint32_t flashloader_erase_all(void)
+{
+       if (flash_bank_erase(true) != FAPI_STATUS_SUCCESS)
+               return STATUS_FAILED_ERASE_ALL;
+
+       memset(g_is_erased, true, sizeof(g_is_erased));
+
+       return STATUS_OK;
+}
+
+uint32_t flashloader_erase_sectors(uint32_t address, uint32_t byte_count)
+{
+       uint32_t first_sector_idx;
+       uint32_t last_sector_idx;
+       uint32_t status;
+       uint32_t idx;
+
+       /* Floor address to the start of the sector and convert to sector number */
+       first_sector_idx = flashloader_address_to_sector(address);
+       last_sector_idx = flashloader_address_to_sector(address + byte_count - 1);
+
+       /*  Erase given sector(s) */
+       for (idx = first_sector_idx; idx <= last_sector_idx; idx++) {
+
+               /* Only erase sectors that haven't already been erased */
+               if (g_is_erased[idx] == false) {
+                       status = flash_sector_erase(idx * FLASH_ERASE_SIZE);
+                       if (status != FAPI_STATUS_SUCCESS) {
+                               status = (STATUS_FAILED_SECTOR_ERASE |
+                                               ((idx << STATUS_EXT_INFO_S) & STATUS_EXT_INFO_M) |
+                                               ((status << STATUS_ROM_CODE_S) & STATUS_ROM_CODE_M));
+                               return status;
+                       }
+                       g_is_erased[idx] = true;
+               }
+       }
+
+       return STATUS_OK;
+}
+
+uint32_t flashloader_program(uint8_t *src, uint32_t address,
+       uint32_t byte_count)
+{
+       uint32_t status = flash_program(src, address, byte_count);
+       if (status != FAPI_STATUS_SUCCESS) {
+               status = (STATUS_FAILED_PROGRAM |
+                                       ((status << STATUS_ROM_CODE_S) & STATUS_ROM_CODE_M));
+       }
+
+       return STATUS_OK;
+}

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)