Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
target/arm926ejs: Use 'bool' data type
[openocd.git] / configure.ac
diff --git a/configure.ac b/configure.ac
index cd7ee1716b9d62d1cd167c448795a1e7fb2b0342..d4338dfbd78d75e45715cd1bd35a7a4456adad04 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
 AC_PREREQ(2.64)
-AC_INIT([openocd], [0.10.0-rc1-dev],
+AC_INIT([openocd], [0.10.0+dev],
   [OpenOCD Mailing List <openocd-devel@lists.sourceforge.net>])
 AC_CONFIG_SRCDIR([src/openocd.c])
 
@@ -114,7 +114,9 @@ m4_define([USB1_ADAPTERS],
        [[ti_icdi], [TI ICDI JTAG Programmer], [HLADAPTER_ICDI]],
        [[ulink], [Keil ULINK JTAG Programmer], [ULINK]],
        [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
-       [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]]])
+       [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
+       [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
+       [[xds110], [TI XDS110 Debug Probe], [XDS110]]])
 
 m4_define([USB_ADAPTERS],
        [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
@@ -129,6 +131,9 @@ m4_define([USB0_ADAPTERS],
 m4_define([HIDAPI_ADAPTERS],
        [[[cmsis_dap], [CMSIS-DAP Compliant Debugger], [CMSIS_DAP]]])
 
+m4_define([HIDAPI_USB1_ADAPTERS],
+       [[[kitprog], [Cypress KitProg Programmer], [KITPROG]]])
+
 m4_define([LIBFTDI_ADAPTERS],
        [[[usb_blaster], [Altera USB-Blaster Compatible], [USB_BLASTER]],
        [[presto], [ASIX Presto Adapter], [PRESTO]],
@@ -243,6 +248,7 @@ AC_ARG_ADAPTERS([
   USB_ADAPTERS,
   USB0_ADAPTERS,
   HIDAPI_ADAPTERS,
+  HIDAPI_USB1_ADAPTERS,
   LIBFTDI_ADAPTERS,
   LIBJAYLINK_ADAPTERS
   ],[auto])
@@ -294,11 +300,15 @@ AS_CASE(["${host_cpu}"],
     AC_ARG_ENABLE([bcm2835gpio],
       AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
       [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+    AC_ARG_ENABLE([imx_gpio],
+      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+      [build_imx_gpio=$enableval], [build_imx_gpio=no])
   ],
   [
     build_ep93xx=no
     build_at91rm9200=no
     build_bcm2835gpio=no
+    build_imx_gpio=no
 ])
 
 AC_ARG_ENABLE([gw16012],
@@ -339,6 +349,10 @@ AC_ARG_ENABLE([internal-libjaylink],
   [Disable building internal libjaylink]),
   [use_internal_libjaylink=$enableval], [use_internal_libjaylink=yes])
 
+AC_ARG_ENABLE([target64],
+  AS_HELP_STRING([--disable-target64], [Disable 64-bit target address]),
+    [build_target64=$enableval], [build_target64=yes])
+
 build_minidriver=no
 AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
 AS_IF([test "x$build_zy1000" = "xyes"], [
@@ -508,6 +522,13 @@ AS_IF([test "x$build_bcm2835gpio" = "xyes"], [
   AC_DEFINE([BUILD_BCM2835GPIO], [0], [0 if you don't want bcm2835gpio.])
 ])
 
+AS_IF([test "x$build_imx_gpio" = "xyes"], [
+  build_bitbang=yes
+  AC_DEFINE([BUILD_IMX_GPIO], [1], [1 if you want imx_gpio.])
+], [
+  AC_DEFINE([BUILD_IMX_GPIO], [0], [0 if you don't want imx_gpio.])
+])
+
 AS_IF([test "x$parport_use_ppdev" = "xyes"], [
   AC_DEFINE([PARPORT_USE_PPDEV], [1], [1 if you want parport to use ppdev.])
 ], [
@@ -552,7 +573,7 @@ AS_IF([test "x$build_buspirate" = "xyes"], [
 
 AS_IF([test "x$use_internal_jimtcl" = "xyes"], [
   AS_IF([test -f "$srcdir/jimtcl/configure.ac"], [
-    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim --with-ext="eventloop array clock regexp stdlib tclcompat" --without-ext="default"])
+    AX_CONFIG_SUBDIR_OPTION([jimtcl], [--disable-install-jim])
   ], [
     AC_MSG_ERROR([jimtcl not found, run git submodule init and git submodule update.])
   ])
@@ -572,6 +593,13 @@ AS_IF([test "x$build_sysfsgpio" = "xyes"], [
   AC_DEFINE([BUILD_SYSFSGPIO], [0], [0 if you don't want SysfsGPIO driver.])
 ])
 
+AS_IF([test "x$build_target64" = "xyes"], [
+  AC_DEFINE([BUILD_TARGET64], [1], [1 if you want 64-bit addresses.])
+], [
+  AC_DEFINE([BUILD_TARGET64], [0], [0 if you don't want 64-bit addresses.])
+])
+
+
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
        use_libusb1=yes
        AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
@@ -602,11 +630,14 @@ PKG_CHECK_MODULES([LIBFTDI], [libftdi1], [use_libftdi=yes], [
        PKG_CHECK_MODULES([LIBFTDI], [libftdi], [use_libftdi=yes], [use_libftdi=no])
 ])
 
-PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.1],
+PKG_CHECK_MODULES([LIBJAYLINK], [libjaylink >= 0.2],
        [use_libjaylink=yes], [use_libjaylink=no])
 
 m4_define([PROCESS_ADAPTERS], [
   m4_foreach([adapter], [$1], [
+       AS_IF([test "x$build_zy1000" = "xyes"], [
+               ADAPTER_VAR([adapter])=no
+       ])
        AS_IF([test $2], [
                AS_IF([test "x$ADAPTER_VAR([adapter])" != "xno"], [
                        AC_DEFINE([BUILD_]ADAPTER_SYM([adapter]), [1], [1 if you want the ]ADAPTER_DESC([adapter]).)
@@ -627,8 +658,9 @@ PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
 PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
 PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
+PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
 PROCESS_ADAPTERS([LIBFTDI_ADAPTERS], ["x$use_libftdi" = "xyes"], [libftdi])
-PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_libusb1" = "xyes" -a "x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libusb-1.x or libjaylink-0.1])
+PROCESS_ADAPTERS([LIBJAYLINK_ADAPTERS], ["x$use_internal_libjaylink" = "xyes" -o "x$use_libjaylink" = "xyes"], [libjaylink-0.2])
 
 AS_IF([test "x$build_openjtag" = "xyes"], [
   AS_IF([test "x$use_libusb1" != "xyes" -a "x$use_libusb0" != "xyes"], [
@@ -670,6 +702,7 @@ AM_CONDITIONAL([ZY1000_MASTER], [test "x$build_zy1000_master" = "xyes"])
 AM_CONDITIONAL([IOUTIL], [test "x$build_ioutil" = "xyes"])
 AM_CONDITIONAL([AT91RM9200], [test "x$build_at91rm9200" = "xyes"])
 AM_CONDITIONAL([BCM2835GPIO], [test "x$build_bcm2835gpio" = "xyes"])
+AM_CONDITIONAL([IMX_GPIO], [test "x$build_imx_gpio" = "xyes"])
 AM_CONDITIONAL([BITBANG], [test "x$build_bitbang" = "xyes"])
 AM_CONDITIONAL([JTAG_VPI], [test "x$build_jtag_vpi" = "xyes" -o "x$build_jtag_vpi" = "xyes"])
 AM_CONDITIONAL([USB_BLASTER_DRIVER], [test "x$enable_usb_blaster" != "xno" -o "x$enable_usb_blaster_2" != "xno"])
@@ -689,6 +722,7 @@ AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"])
 AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
 AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
 AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
+AM_CONDITIONAL([TARGET64], [test "x$build_target64" = "xyes"])
 
 AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
@@ -756,7 +790,8 @@ echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
 m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
-       HIDAPI_ADAPTERS, LIBFTDI_ADAPTERS, LIBJAYLINK_ADAPTERS],
+       HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
+       LIBJAYLINK_ADAPTERS],
        [s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
        AS_CASE([$ADAPTER_VAR([adapter])],
                [auto], [
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)