Improve clone command in README

[openocd.git] / README

diff --git a/README b/README
index 7b1f4a2af072642cbbb1592dadae70f1a117df54..6a83217425d4dd300e33e48802d82ebbcc6e8e70 100644 (file)
--- a/README
+++ b/README
@@ -275,6 +275,8 @@ options may be available there:
 
   --enable-stlink         Enable building support for the ST-Link JTAG
                           Programmer
+  --enable-ti-icdi        Enable building support for the TI/Stellaris ICDI
+                          JTAG Programmer
 
   --enable-osbdm          Enable building support for the OSBDM (JTAG only)
                           Programmer
@@ -421,7 +423,7 @@ Obtaining OpenOCD From GIT
 You can download the current GIT version with a GIT client of your
 choice from the main repository:
 
-   git://openocd.git.sourceforge.net/gitroot/openocd/openocd
+   git://git.code.sf.net/p/openocd/code
 
 You may prefer to use a mirror:
 
@@ -432,7 +434,7 @@ Using the GIT command line client, you might use the following command
 to set up a local copy of the current repository (make sure there is no
 directory called "openocd" in the current directory):
 
-   git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd
+   git clone git://git.code.sf.net/p/openocd/code openocd
 
 Then you can update that at your convenience using
 
@@ -441,7 +443,6 @@ Then you can update that at your convenience using
 There is also a gitweb interface, which you can use either to browse
 the repository or to download arbitrary snapshots using HTTP:
 
-   http://openocd.git.sourceforge.net/git/gitweb.cgi?p=openocd/openocd
    http://repo.or.cz/w/openocd.git
 
 Snapshots are compressed tarballs of the source tree, about 1.3 MBytes