at91samd: add chip IDs for SAMC20 and SAMC21 families

[openocd.git] / README

diff --git a/README b/README
index 287cc922f5494399e849a9486fbac194b2f65666..149eec57efd441a1fe2bc84991e0ec9457236b96 100644 (file)
--- a/README
+++ b/README
@@ -39,7 +39,11 @@ If you are connecting a particular adapter with some specific target,
 you need to source both the jtag interface and the target configs,
 e.g.:
 
-  openocd -f interface/ftdi/jtagkey2.cfg -f target/ti_calypso.cfg
+  openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \
+          -f target/ti_calypso.cfg
+
+  openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" \
+          -f target/stm32l0.cfg
 
 NB: when using an FTDI-based adapter you should prefer configs in the
 ftdi directory; the old configs for the ft2232 are deprecated.
@@ -57,10 +61,10 @@ In addition to the in-tree documentation, the latest manuals may be
 viewed online at the following URLs:
 
   OpenOCD User's Guide:
-    http://openocd.sourceforge.net/doc/html/index.html
+    http://openocd.org/doc/html/index.html
 
   OpenOCD Developer's Manual:
-    http://openocd.sourceforge.net/doc/doxygen/html/index.html
+    http://openocd.org/doc/doxygen/html/index.html
 
 These reflect the latest development versions, so the following section
 introduces how to build the complete documentation from the package.
@@ -102,12 +106,12 @@ JTAG adapters
 
 AICE, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432,
 BCM2835, Bus Blaster, Buspirate, Chameleon, CMSIS-DAP, Cortino, DENX,
-DLC 5, DLP-USB1232H, embedded projects, eStick, FlashLINK, FlossJTAG,
-Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI, ICEBear, J-Link, JTAG
-VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link, Lisa/L,
-LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous, OpenJTAG,
-Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug devkit,
-Stellaris evkits, ST-LINK (SWO tracing supported),
+Digilent JTAG-SMT2, DLC 5, DLP-USB1232H, embedded projects, eStick,
+FlashLINK, FlossJTAG, Flyswatter, Flyswatter2, Gateworks, Hoegl, ICDI,
+ICEBear, J-Link, JTAG VPI, JTAGkey, JTAGkey2, JTAG-lock-pick, KT-Link,
+Lisa/L, LPC1768-Stick, MiniModule, NGX, NXHX, OOCDLink, Opendous,
+OpenJTAG, Openmoko, OpenRD, OSBDM, Presto, Redbee, RLink, SheevaPlug
+devkit, Stellaris evkits, ST-LINK (SWO tracing supported),
 STM32-PerformanceStick, STR9-comStick, sysfsgpio, TUMPA, Turtelizer,
 ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink,
 Wiggler, XDS100v2, Xverve.
@@ -123,9 +127,10 @@ Flash drivers
 -------------
 
 ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, Kinetis,
-LPC2000, LPC2900, LPCSPIFI, Milandr, NuMicro, PIC32mx, Stellaris,
-STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180,
-LPC32xx, i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
+LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI,
+Milandr, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI,
+STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx,
+i.MX31, MXC, NUC910, Orion/Kirkwood, S3C24xx, S3C6400.
 
 
 ==================
@@ -237,8 +242,8 @@ Permissions delegation
 Running OpenOCD with root/administrative permissions is strongly
 discouraged for security reasons.
 
-For USB devices on GNU/Linux you should use the contrib/openocd.udev
-rules file. It probably belongs somewhere in /etc/udev/rules.d, but
+For USB devices on GNU/Linux you should use the contrib/99-openocd.rules
+file. It probably belongs somewhere in /etc/udev/rules.d, but
 consult your operating system documentation to be sure. Do not forget
 to add yourself to the "plugdev" group.