-This file should include highlights of the changes made in the
-OpenOCD openocd-0.3.0 source archive release. See the repository
-history for details about what changed, including bugfixes and
-other issues not mentioned here.
+This file includes highlights of the changes made in the OpenOCD
+source archive release.
JTAG Layer:
- FT2232H (high speed USB) support doesn't need separate configuration
- New FT2232H JTAG adapters: Amontec, Olimex, Signalyzer
- New reset_config options for SRST gating the JTAG clock (or not)
- TAP declaration no longer requires ircapture and mask attributes
- Scan chain setup should be more robust, with better diagnostics
- New TAP events:
- "post-reset" for TAP-invariant setup code (TAPs not usable yet)
- "setup" for use once TAPs are addressable (e.g. with ICEpick)
- Overridable Tcl "init_reset" and "jtag_init" procedures
- Simple "autoprobe" mechanism to help simplify server setup
Boundary Scan:
- SVF bugfixes ... parsing fixes, better STATE switch conformance
- XSVF bugfixes ... be more correct, handle Xilinx tool output
Target Layer:
- Warn on use of obsolete numeric target IDs
- New commands for use with Cortex-M3 processors:
- "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
- "cortex_m3 vector_catch" ... traps certain hardware faults
- without tying up breakpoint resources
- If you're willing to help debug it
- VERY EARLY Cortex-A8 and ARMv7A support
- Updated BeagleBoard.org hardware support
- you may need to explicitly "reset" after connect-to-Beagle
- New commands for use with XScale processors: "xscale vector_table"
- ARM
- bugfixes to single-stepping Thumb code
- ETM: unavailable registers are not listed
- ETB, ETM: report actual hardware status
- ARM9
- name change: "arm9 vector_catch" not "arm9tdmi vector_catch"
- ARM11
- single stepping support for i.MX31
- bugfix for missing "arm11" prefix on "arm11 memwrite ..."
- GDB support
- gdb_attach command is gone
Flash Layer:
- The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
- New drivers:
- lpc2900, for NXP LPC2900 chips (ARM968 based)
- mx3_nand, for imx31
- New "last" flag for NOR "flash erase_sector" and "flash protect"
- The "nand erase N" command now erases all of bank N
- Speed up davinci_nand by about 3x
Board, Target, and Interface Configuration Scripts:
- Amontec JTAGkey2 support
- Cleanup and additions for the TI/Luminary Stellaris scripts
- LPC1768 target (and flash) support
- Keil MCB1700 eval board
- Samsung s3c2450
- Mini2440 board
- Numeric TAP and Target identifiers now trigger warnings
- PXA255 partially enumerates
+
+Server Layer:
Documentation:
- Capture more debugging and setup advice
- Notes on target source code changes that may help debugging
Build and Release:
- Clean builds on (32-bit) Cygwin
- Clean builds on 64-bit MinGW
-For more details about what has changed since the last release,
-see the ChangeLog associated with this source archive. For older NEWS,
-see the NEWS files associated with each release (i.e. NEWS-<version>).
+
+This release also contains a number of other important functional and
+cosmetic bugfixes. For more details about what has changed since the
+last release, see the git repository history:
+
+http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path=
+
+
+For older NEWS, see the NEWS files associated with each release
+(i.e. NEWS-<version>).
For more information about contributing test reports, bug fixes, or new
features and device support, please read the new Developer Manual (or
-the BUGS and PATCHES files in the source archive).
+the BUGS and PATCHES.txt files in the source archive).
Code Review / openocd.git / blobdiff