#daemon configuration
telnet_port 4444
gdb_port 3333

# tell gdb our flash memory map
# and enable flash programming
gdb_memory_map enable
gdb_flash_program enable

#interface
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200


#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config srst_only srst_pulls_trst

#jtag scan chain
jtag newtap sam7 cpu -irlen 4 -irmask 0xf

#target configuration
target create target0 arm7tdmi -endian little -chain-position 0
[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false

target_script 0 reset .\prj\sam7s256_reset.script

#flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank at91sam7 0 0 0 0 0

# For more information about the configuration files,
# look at the OpenOCD User's Guide.

init
reset halt