# SPDX-License-Identifier: GPL-2.0-or-later

# Main file for Marvell Armada 3700 series targets
#
# !!!!!!
#
# This file should not be included directly. Instead, please include
# either marvell/88f3710.cfg or marvell/88f3720.cfg, which set the needed
# variables to the appropriate values.
#
# !!!!!!

# Armada 3700 supports both JTAG and SWD transports.
source [find target/swj-dp.tcl]

if { [info exists CORES] } {
    set _cores $CORES
} else {
    error "CORES not set. Please do not include marvell/88f37x0.cfg directly, but the specific chip configuration file (marvell/88f3710.cfg, marvell/88f3720.cfg, etc.)."
}

if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
} else {
    set _CHIPNAME [format a37%s0 $_cores]
}

set _ctis {0x80820000 0x80920000}

#
# Main DAP
#
if { [info exists DAP_TAPID] } {
    set _DAP_TAPID $DAP_TAPID
} else {
    set _DAP_TAPID 0x4ba00477
}

# declare the one JTAG tap to access the DAP
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -ignore-version -enable
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

# declare the main application cores
set _TARGETNAME $_CHIPNAME.cpu
set _smp_command ""

for { set _core 0 } { $_core < $_cores } { incr _core 1 } {

    cti create cti$_core -dap $_CHIPNAME.dap -baseaddr [lindex $_ctis $_core] -ap-num 0

    set _command "target create ${_TARGETNAME}$_core aarch64 \
                         -dap $_CHIPNAME.dap -coreid $_core \
                         -cti cti$_core"

    if { $_core != 0 } {
        # non-boot core examination may fail
        set _command "$_command -defer-examine"
        set _smp_command "$_smp_command ${_TARGETNAME}$_core"
    } else {
        set _command "$_command -rtos hwthread"
        set _smp_command "target smp ${_TARGETNAME}$_core"
    }

    eval $_command
}

eval $_smp_command

# declare the auxiliary Cortex-M3 core on AP #3
target create ${_TARGETNAME}.m3 cortex_m -dap $_CHIPNAME.dap -ap-num 3 -defer-examine

targets ${_TARGETNAME}0