# SPDX-License-Identifier: GPL-2.0-or-later # # Buspirate with OpenOCD support # # http://dangerousprototypes.com/bus-pirate-manual/ # adapter driver buspirate # you need to specify port on which BP lives #buspirate port /dev/ttyUSB0 # communication speed setting buspirate speed normal ;# or fast # voltage regulator Enabled = 1 Disabled = 0 #buspirate vreg 0 # pin mode normal or open-drain (jtag only) #buspirate mode normal # pullup state Enabled = 1 Disabled = 0 #buspirate pullup 0 # this depends on the cable, you are safe with this option reset_config srst_only