set AT91_MATRIX_MCFG	[expr ($AT91_MATRIX + 0x00)]	;# Master Configuration Register #
set		AT91_MATRIX_RCB0	[expr (1 << 0)]		;# Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master)
set		AT91_MATRIX_RCB1	[expr (1 << 1)]		;# Remap Command for AHB Master 1 (ARM926EJ-S Data Master)

set AT91_MATRIX_SCFG0	[expr ($AT91_MATRIX + 0x04)]	;# Slave Configuration Register 0
set AT91_MATRIX_SCFG1	[expr ($AT91_MATRIX + 0x08)]	;# Slave Configuration Register 1
set AT91_MATRIX_SCFG2	[expr ($AT91_MATRIX + 0x0C)]	;# Slave Configuration Register 2
set AT91_MATRIX_SCFG3	[expr ($AT91_MATRIX + 0x10)]	;# Slave Configuration Register 3
set AT91_MATRIX_SCFG4	[expr ($AT91_MATRIX + 0x14)]	;# Slave Configuration Register 4
set		AT91_MATRIX_SLOT_CYCLE		[expr (0xff << 0)]	;# Maximum Number of Allowed Cycles for a Burst
set		AT91_MATRIX_DEFMSTR_TYPE	[expr (3    << 16)]	;# Default Master Type
set			AT91_MATRIX_DEFMSTR_TYPE_NONE	[expr (0 << 16)]
set			AT91_MATRIX_DEFMSTR_TYPE_LAST	[expr (1 << 16)]
set			AT91_MATRIX_DEFMSTR_TYPE_FIXED	[expr (2 << 16)]
set		AT91_MATRIX_FIXED_DEFMSTR	[expr (7    << 18)]	;# Fixed Index of Default Master

set AT91_MATRIX_TCR		[expr ($AT91_MATRIX + 0x24)]	;# TCM Configuration Register
set		AT91_MATRIX_ITCM_SIZE		[expr (0xf << 0)]	;# Size of ITCM enabled memory block
set			AT91_MATRIX_ITCM_0		[expr (0 << 0)]
set			AT91_MATRIX_ITCM_16		[expr (5 << 0)]
set			AT91_MATRIX_ITCM_32		[expr (6 << 0)]
set			AT91_MATRIX_ITCM_64		[expr (7 << 0)]
set		AT91_MATRIX_DTCM_SIZE		[expr (0xf << 4)]	;# Size of DTCM enabled memory block
set			AT91_MATRIX_DTCM_0		[expr (0 << 4)]
set			AT91_MATRIX_DTCM_16		[expr (5 << 4)]
set			AT91_MATRIX_DTCM_32		[expr (6 << 4)]
set			AT91_MATRIX_DTCM_64		[expr (7 << 4)]

set AT91_MATRIX_EBICSA	[expr ($AT91_MATRIX + 0x30)]	;# EBI Chip Select Assignment Register
set		AT91_MATRIX_CS1A		[expr (1 << 1)]	;# Chip Select 1 Assignment
set			AT91_MATRIX_CS1A_SMC		[expr (0 << 1)]
set			AT91_MATRIX_CS1A_SDRAMC		[expr (1 << 1)]
set		AT91_MATRIX_CS3A		[expr (1 << 3)]	;# Chip Select 3 Assignment
set			AT91_MATRIX_CS3A_SMC		[expr (0 << 3)]
set			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	[expr (1 << 3)]
set		AT91_MATRIX_CS4A		[expr (1 << 4)]	;# Chip Select 4 Assignment
set			AT91_MATRIX_CS4A_SMC		[expr (0 << 4)]
set			AT91_MATRIX_CS4A_SMC_CF1	[expr (1 << 4)]
set		AT91_MATRIX_CS5A		[expr (1 << 5)]	;# Chip Select 5 Assignment
set			AT91_MATRIX_CS5A_SMC		[expr (0 << 5)]
set			AT91_MATRIX_CS5A_SMC_CF2	[expr (1 << 5)]
set		AT91_MATRIX_DBPUC		[expr (1 << 8)]	;# Data Bus Pull-up Configuration

set AT91_MATRIX_USBPUCR	[expr ($AT91_MATRIX + 0x34)]	;# USB Pad Pull-Up Control Register
set		AT91_MATRIX_USBPUCR_PUON	[expr (1 << 30)]	;# USB Device PAD Pull-up Enable