# SPDX-License-Identifier: GPL-2.0-or-later # This is for the T-Home X300T / X301T IPTV box, # which are based on IPTV reference designs from Kiss/Cisco KMM-3*** # # It has Sigma Designs SMP8634 chip. source [find target/smp8634.cfg] $_TARGETNAME configure -event reset-init { x300t_init } # 1MB CFI capable flash # flash bank set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0xac000000 0x100000 2 2 $_TARGETNAME proc x300t_init { } { # Setup SDRAM config and flash mapping # initialize ram mww 0xa003fffc 3 mww 0xa003fffc 2 mww 0xa0030000 0xE34111BA mww 0xa003fffc 0xa4444 mww 0xa003fffc 0 # remap boot vector in CPU local RAM mww 0xa006f000 0x60000 # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4 mww 0x0006f010 0x48000000 # map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS) mww 0x00061ff0 0x48000000 }