# SPDX-License-Identifier: GPL-2.0-or-later # # Be sure you include the speed and interface before this file # Example: # -c "adapter speed 5000" -f "interface/ftdi/olimex-arm-usb-tiny-h.cfg" -f "board/sifive-e31arty.cfg" set _CHIPNAME riscv jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME $_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1 flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000 init if {[ info exists pulse_srst]} { ftdi set_signal nSRST 0 ftdi set_signal nSRST z } halt flash protect 0 64 last off echo "Ready for Remote Connections"