/*************************************************************************** * Copyright (C) 2018 by Liviu Ionescu * * ilg@livius.net * * * * Copyright (C) 2009 by Marvell Technology Group Ltd. * * Written by Nicolas Pitre * * * * Copyright (C) 2010 by Spencer Oliver * * spen@spen-soft.co.uk * * * * Copyright (C) 2016 by Square, Inc. * * Steven Stallion * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program. If not, see . * ***************************************************************************/ /** * @file * Hold RISC-V semihosting support. * * The RISC-V code is inspired from ARM semihosting. * * Details can be found in chapter 8 of DUI0203I_rvct_developer_guide.pdf * from ARM Ltd. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "log.h" #include "target/target.h" #include "target/semihosting_common.h" #include "riscv.h" static int riscv_semihosting_setup(struct target *target, int enable); static int riscv_semihosting_post_result(struct target *target); /** * Initialize RISC-V semihosting. Use common ARM code. */ void riscv_semihosting_init(struct target *target) { semihosting_common_init(target, riscv_semihosting_setup, riscv_semihosting_post_result); } /** * Check for and process a semihosting request using the ARM protocol). This * is meant to be called when the target is stopped due to a debug mode entry. * If the value 0 is returned then there was nothing to process. A non-zero * return value signifies that a request was processed and the target resumed, * or an error was encountered, in which case the caller must return * immediately. * * @param target Pointer to the target to process. * @param retval Pointer to a location where the return code will be stored * @return non-zero value if a request was processed or an error encountered */ int riscv_semihosting(struct target *target, int *retval) { struct semihosting *semihosting = target->semihosting; if (!semihosting) return 0; if (!semihosting->is_active) return 0; riscv_reg_t dpc; int result = riscv_get_register(target, &dpc, GDB_REGNO_DPC); if (result != ERROR_OK) return 0; uint8_t tmp[12]; /* Read the current instruction, including the bracketing */ *retval = target_read_memory(target, dpc - 4, 2, 6, tmp); if (*retval != ERROR_OK) return 0; /* * The instructions that trigger a semihosting call, * always uncompressed, should look like: * * 01f01013 slli zero,zero,0x1f * 00100073 ebreak * 40705013 srai zero,zero,0x7 */ uint32_t pre = target_buffer_get_u32(target, tmp); uint32_t ebreak = target_buffer_get_u32(target, tmp + 4); uint32_t post = target_buffer_get_u32(target, tmp + 8); LOG_DEBUG("check %08x %08x %08x from 0x%" PRIx64 "-4", pre, ebreak, post, dpc); if (pre != 0x01f01013 || ebreak != 0x00100073 || post != 0x40705013) { /* Not the magic sequence defining semihosting. */ return 0; } /* * Perform semihosting call if we are not waiting on a fileio * operation to complete. */ if (!semihosting->hit_fileio) { /* RISC-V uses A0 and A1 to pass function arguments */ riscv_reg_t r0; riscv_reg_t r1; result = riscv_get_register(target, &r0, GDB_REGNO_A0); if (result != ERROR_OK) return 0; result = riscv_get_register(target, &r1, GDB_REGNO_A1); if (result != ERROR_OK) return 0; semihosting->op = r0; semihosting->param = r1; semihosting->word_size_bytes = riscv_xlen(target) / 8; /* Check for ARM operation numbers. */ if (0 <= semihosting->op && semihosting->op <= 0x31) { *retval = semihosting_common(target); if (*retval != ERROR_OK) { LOG_ERROR("Failed semihosting operation"); return 0; } } else { /* Unknown operation number, not a semihosting call. */ return 0; } } /* * Resume target if we are not waiting on a fileio * operation to complete. */ if (semihosting->is_resumable && !semihosting->hit_fileio) { /* Resume right after the EBREAK 4 bytes instruction. */ *retval = target_resume(target, 0, dpc+4, 0, 0); if (*retval != ERROR_OK) { LOG_ERROR("Failed to resume target"); return 0; } return 1; } return 0; } /* ------------------------------------------------------------------------- * Local functions. */ /** * Called via semihosting->setup() later, after the target is known, * usually on the first semihosting command. */ static int riscv_semihosting_setup(struct target *target, int enable) { LOG_DEBUG("enable=%d", enable); struct semihosting *semihosting = target->semihosting; if (semihosting) semihosting->setup_time = clock(); return ERROR_OK; } static int riscv_semihosting_post_result(struct target *target) { struct semihosting *semihosting = target->semihosting; if (!semihosting) { /* If not enabled, silently ignored. */ return 0; } LOG_DEBUG("0x%" PRIx64, semihosting->result); riscv_set_register(target, GDB_REGNO_A0, semihosting->result); return 0; }