/*************************************************************************** * SWIM contributions by Ake Rehnman * * Copyright (C) 2017 Ake Rehnman * * ake.rehnman(at)gmail.com * * * * Copyright (C) 2011-2012 by Mathias Kuester * * Mathias Kuester * * * * Copyright (C) 2012 by Spencer Oliver * * spen@spen-soft.co.uk * * * * This code is based on https://github.com/texane/stlink * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * * (at your option) any later version. * * * * This program is distributed in the hope that it will be useful, * * but WITHOUT ANY WARRANTY; without even the implied warranty of * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * * * You should have received a copy of the GNU General Public License * * along with this program. If not, see . * ***************************************************************************/ #ifdef HAVE_CONFIG_H #include "config.h" #endif /* project specific includes */ #include #include #include #include #include #include #include #include "libusb_common.h" #define ENDPOINT_IN 0x80 #define ENDPOINT_OUT 0x00 #define STLINK_WRITE_TIMEOUT 1000 #define STLINK_READ_TIMEOUT 1000 #define STLINK_NULL_EP 0 #define STLINK_RX_EP (1|ENDPOINT_IN) #define STLINK_TX_EP (2|ENDPOINT_OUT) #define STLINK_TRACE_EP (3|ENDPOINT_IN) #define STLINK_V2_1_TX_EP (1|ENDPOINT_OUT) #define STLINK_V2_1_TRACE_EP (2|ENDPOINT_IN) #define STLINK_SG_SIZE (31) #define STLINK_DATA_SIZE (4096) #define STLINK_CMD_SIZE_V2 (16) #define STLINK_CMD_SIZE_V1 (10) #define STLINK_V1_PID (0x3744) #define STLINK_V2_PID (0x3748) #define STLINK_V2_1_PID (0x374B) #define STLINK_V2_1_NO_MSD_PID (0x3752) /* the current implementation of the stlink limits * 8bit read/writes to max 64 bytes. */ #define STLINK_MAX_RW8 (64) /* "WAIT" responses will be retried (with exponential backoff) at * most this many times before failing to caller. */ #define MAX_WAIT_RETRIES 8 enum stlink_jtag_api_version { STLINK_JTAG_API_V1 = 1, STLINK_JTAG_API_V2, }; /** */ struct stlink_usb_version { /** */ int stlink; /** */ int jtag; /** */ int swim; /** highest supported jtag api version */ enum stlink_jtag_api_version jtag_api_max; /** one bit for each feature supported. See macros STLINK_F_* */ uint32_t flags; }; /** */ struct stlink_usb_handle_s { /** */ struct jtag_libusb_device_handle *fd; /** */ struct libusb_transfer *trans; /** */ uint8_t rx_ep; /** */ uint8_t tx_ep; /** */ uint8_t trace_ep; /** */ uint8_t cmdbuf[STLINK_SG_SIZE]; /** */ uint8_t cmdidx; /** */ uint8_t direction; /** */ uint8_t databuf[STLINK_DATA_SIZE]; /** */ uint32_t max_mem_packet; /** */ enum hl_transports transport; /** */ struct stlink_usb_version version; /** */ uint16_t vid; /** */ uint16_t pid; /** this is the currently used jtag api */ enum stlink_jtag_api_version jtag_api; /** */ struct { /** whether SWO tracing is enabled or not */ bool enabled; /** trace module source clock */ uint32_t source_hz; } trace; /** reconnect is needed next time we try to query the * status */ bool reconnect_pending; }; #define STLINK_SWIM_ERR_OK 0x00 #define STLINK_SWIM_BUSY 0x01 #define STLINK_DEBUG_ERR_OK 0x80 #define STLINK_DEBUG_ERR_FAULT 0x81 #define STLINK_SWD_AP_WAIT 0x10 #define STLINK_SWD_AP_FAULT 0x11 #define STLINK_SWD_AP_ERROR 0x12 #define STLINK_SWD_AP_PARITY_ERROR 0x13 #define STLINK_JTAG_WRITE_ERROR 0x0c #define STLINK_JTAG_WRITE_VERIF_ERROR 0x0d #define STLINK_SWD_DP_WAIT 0x14 #define STLINK_SWD_DP_FAULT 0x15 #define STLINK_SWD_DP_ERROR 0x16 #define STLINK_SWD_DP_PARITY_ERROR 0x17 #define STLINK_SWD_AP_WDATA_ERROR 0x18 #define STLINK_SWD_AP_STICKY_ERROR 0x19 #define STLINK_SWD_AP_STICKYORUN_ERROR 0x1a #define STLINK_CORE_RUNNING 0x80 #define STLINK_CORE_HALTED 0x81 #define STLINK_CORE_STAT_UNKNOWN -1 #define STLINK_GET_VERSION 0xF1 #define STLINK_DEBUG_COMMAND 0xF2 #define STLINK_DFU_COMMAND 0xF3 #define STLINK_SWIM_COMMAND 0xF4 #define STLINK_GET_CURRENT_MODE 0xF5 #define STLINK_GET_TARGET_VOLTAGE 0xF7 #define STLINK_DEV_DFU_MODE 0x00 #define STLINK_DEV_MASS_MODE 0x01 #define STLINK_DEV_DEBUG_MODE 0x02 #define STLINK_DEV_SWIM_MODE 0x03 #define STLINK_DEV_BOOTLOADER_MODE 0x04 #define STLINK_DEV_UNKNOWN_MODE -1 #define STLINK_DFU_EXIT 0x07 /* STLINK_SWIM_ENTER_SEQ 1.3ms low then 750Hz then 1.5kHz STLINK_SWIM_GEN_RST STM8 DM pulls reset pin low 50us STLINK_SWIM_SPEED uint8_t (0=low|1=high) STLINK_SWIM_WRITEMEM uint16_t length uint32_t address STLINK_SWIM_RESET send syncronization seq (16us low, response 64 clocks low) */ #define STLINK_SWIM_ENTER 0x00 #define STLINK_SWIM_EXIT 0x01 #define STLINK_SWIM_READ_CAP 0x02 #define STLINK_SWIM_SPEED 0x03 #define STLINK_SWIM_ENTER_SEQ 0x04 #define STLINK_SWIM_GEN_RST 0x05 #define STLINK_SWIM_RESET 0x06 #define STLINK_SWIM_ASSERT_RESET 0x07 #define STLINK_SWIM_DEASSERT_RESET 0x08 #define STLINK_SWIM_READSTATUS 0x09 #define STLINK_SWIM_WRITEMEM 0x0a #define STLINK_SWIM_READMEM 0x0b #define STLINK_SWIM_READBUF 0x0c #define STLINK_DEBUG_ENTER_JTAG 0x00 #define STLINK_DEBUG_GETSTATUS 0x01 #define STLINK_DEBUG_FORCEDEBUG 0x02 #define STLINK_DEBUG_APIV1_RESETSYS 0x03 #define STLINK_DEBUG_APIV1_READALLREGS 0x04 #define STLINK_DEBUG_APIV1_READREG 0x05 #define STLINK_DEBUG_APIV1_WRITEREG 0x06 #define STLINK_DEBUG_READMEM_32BIT 0x07 #define STLINK_DEBUG_WRITEMEM_32BIT 0x08 #define STLINK_DEBUG_RUNCORE 0x09 #define STLINK_DEBUG_STEPCORE 0x0a #define STLINK_DEBUG_APIV1_SETFP 0x0b #define STLINK_DEBUG_READMEM_8BIT 0x0c #define STLINK_DEBUG_WRITEMEM_8BIT 0x0d #define STLINK_DEBUG_APIV1_CLEARFP 0x0e #define STLINK_DEBUG_APIV1_WRITEDEBUGREG 0x0f #define STLINK_DEBUG_APIV1_SETWATCHPOINT 0x10 #define STLINK_DEBUG_ENTER_JTAG 0x00 #define STLINK_DEBUG_ENTER_SWD 0xa3 #define STLINK_DEBUG_APIV1_ENTER 0x20 #define STLINK_DEBUG_EXIT 0x21 #define STLINK_DEBUG_READCOREID 0x22 #define STLINK_DEBUG_APIV2_ENTER 0x30 #define STLINK_DEBUG_APIV2_READ_IDCODES 0x31 #define STLINK_DEBUG_APIV2_RESETSYS 0x32 #define STLINK_DEBUG_APIV2_READREG 0x33 #define STLINK_DEBUG_APIV2_WRITEREG 0x34 #define STLINK_DEBUG_APIV2_WRITEDEBUGREG 0x35 #define STLINK_DEBUG_APIV2_READDEBUGREG 0x36 #define STLINK_DEBUG_APIV2_READALLREGS 0x3A #define STLINK_DEBUG_APIV2_GETLASTRWSTATUS 0x3B #define STLINK_DEBUG_APIV2_DRIVE_NRST 0x3C #define STLINK_DEBUG_APIV2_START_TRACE_RX 0x40 #define STLINK_DEBUG_APIV2_STOP_TRACE_RX 0x41 #define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42 #define STLINK_DEBUG_APIV2_SWD_SET_FREQ 0x43 #define STLINK_DEBUG_APIV2_JTAG_SET_FREQ 0x44 #define STLINK_DEBUG_APIV2_READMEM_16BIT 0x47 #define STLINK_DEBUG_APIV2_WRITEMEM_16BIT 0x48 #define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00 #define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01 #define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02 #define STLINK_TRACE_SIZE 4096 #define STLINK_TRACE_MAX_HZ 2000000 #define STLINK_TRACE_MIN_VERSION 13 /** */ enum stlink_mode { STLINK_MODE_UNKNOWN = 0, STLINK_MODE_DFU, STLINK_MODE_MASS, STLINK_MODE_DEBUG_JTAG, STLINK_MODE_DEBUG_SWD, STLINK_MODE_DEBUG_SWIM }; #define REQUEST_SENSE 0x03 #define REQUEST_SENSE_LENGTH 18 /* * Map the relevant features, quirks and workaround for specific firmware * version of stlink */ /* aliases */ struct speed_map { int speed; int speed_divisor; }; /* SWD clock speed */ static const struct speed_map stlink_khz_to_speed_map_swd[] = { {4000, 0}, {1800, 1}, /* default */ {1200, 2}, {950, 3}, {480, 7}, {240, 15}, {125, 31}, {100, 40}, {50, 79}, {25, 158}, {15, 265}, {5, 798} }; /* JTAG clock speed */ static const struct speed_map stlink_khz_to_speed_map_jtag[] = { {18000, 2}, {9000, 4}, {4500, 8}, {2250, 16}, {1125, 32}, /* default */ {562, 64}, {281, 128}, {140, 256} }; static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size); static int stlink_swim_status(void *handle); /** */ static int stlink_usb_xfer_v1_get_status(void *handle) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* read status */ memset(h->cmdbuf, 0, STLINK_SG_SIZE); if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)h->cmdbuf, 13, STLINK_READ_TIMEOUT) != 13) return ERROR_FAIL; uint32_t t1; t1 = buf_get_u32(h->cmdbuf, 0, 32); /* check for USBS */ if (t1 != 0x53425355) return ERROR_FAIL; /* * CSW status: * 0 success * 1 command failure * 2 phase error */ if (h->cmdbuf[12] != 0) return ERROR_FAIL; return ERROR_OK; } /** */ static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)h->cmdbuf, cmdsize, STLINK_WRITE_TIMEOUT) != cmdsize) { return ERROR_FAIL; } if (h->direction == h->tx_ep && size) { if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)buf, size, STLINK_WRITE_TIMEOUT) != size) { LOG_DEBUG("bulk write failed"); return ERROR_FAIL; } } else if (h->direction == h->rx_ep && size) { if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)buf, size, STLINK_READ_TIMEOUT) != size) { LOG_DEBUG("bulk read failed"); return ERROR_FAIL; } } return ERROR_OK; } /** */ static int stlink_usb_xfer_v1_get_sense(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 16); h->cmdbuf[h->cmdidx++] = REQUEST_SENSE; h->cmdbuf[h->cmdidx++] = 0; h->cmdbuf[h->cmdidx++] = 0; h->cmdbuf[h->cmdidx++] = 0; h->cmdbuf[h->cmdidx++] = REQUEST_SENSE_LENGTH; res = stlink_usb_xfer_rw(handle, REQUEST_SENSE_LENGTH, h->databuf, 16); if (res != ERROR_OK) return res; if (stlink_usb_xfer_v1_get_status(handle) != ERROR_OK) return ERROR_FAIL; return ERROR_OK; } /* transfers block in cmdbuf indicates number of bytes in the following data phase. */ static int stlink_usb_xfer(void *handle, const uint8_t *buf, int size) { int err, cmdsize = STLINK_CMD_SIZE_V2; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->version.stlink == 1) { cmdsize = STLINK_SG_SIZE; /* put length in bCBWCBLength */ h->cmdbuf[14] = h->cmdidx-15; } err = stlink_usb_xfer_rw(handle, cmdsize, buf, size); if (err != ERROR_OK) return err; if (h->version.stlink == 1) { if (stlink_usb_xfer_v1_get_status(handle) != ERROR_OK) { /* check csw status */ if (h->cmdbuf[12] == 1) { LOG_DEBUG("get sense"); if (stlink_usb_xfer_v1_get_sense(handle) != ERROR_OK) return ERROR_FAIL; } return ERROR_FAIL; } } return ERROR_OK; } /** Converts an STLINK status code held in the first byte of a response to an openocd error, logs any error/wait status as debug output. */ static int stlink_usb_error_check(void *handle) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->transport == HL_TRANSPORT_SWIM) { switch (h->databuf[0]) { case STLINK_SWIM_ERR_OK: return ERROR_OK; case STLINK_SWIM_BUSY: return ERROR_WAIT; default: LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]); return ERROR_FAIL; } } /* TODO: no error checking yet on api V1 */ if (h->jtag_api == STLINK_JTAG_API_V1) h->databuf[0] = STLINK_DEBUG_ERR_OK; switch (h->databuf[0]) { case STLINK_DEBUG_ERR_OK: return ERROR_OK; case STLINK_DEBUG_ERR_FAULT: LOG_DEBUG("SWD fault response (0x%x)", STLINK_DEBUG_ERR_FAULT); return ERROR_FAIL; case STLINK_SWD_AP_WAIT: LOG_DEBUG("wait status SWD_AP_WAIT (0x%x)", STLINK_SWD_AP_WAIT); return ERROR_WAIT; case STLINK_SWD_DP_WAIT: LOG_DEBUG("wait status SWD_DP_WAIT (0x%x)", STLINK_SWD_DP_WAIT); return ERROR_WAIT; case STLINK_JTAG_WRITE_ERROR: LOG_DEBUG("Write error"); return ERROR_FAIL; case STLINK_JTAG_WRITE_VERIF_ERROR: LOG_DEBUG("Write verify error, ignoring"); return ERROR_OK; case STLINK_SWD_AP_FAULT: /* git://git.ac6.fr/openocd commit 657e3e885b9ee10 * returns ERROR_OK with the comment: * Change in error status when reading outside RAM. * This fix allows CDT plugin to visualize memory. */ LOG_DEBUG("STLINK_SWD_AP_FAULT"); return ERROR_FAIL; case STLINK_SWD_AP_ERROR: LOG_DEBUG("STLINK_SWD_AP_ERROR"); return ERROR_FAIL; case STLINK_SWD_AP_PARITY_ERROR: LOG_DEBUG("STLINK_SWD_AP_PARITY_ERROR"); return ERROR_FAIL; case STLINK_SWD_DP_FAULT: LOG_DEBUG("STLINK_SWD_DP_FAULT"); return ERROR_FAIL; case STLINK_SWD_DP_ERROR: LOG_DEBUG("STLINK_SWD_DP_ERROR"); return ERROR_FAIL; case STLINK_SWD_DP_PARITY_ERROR: LOG_DEBUG("STLINK_SWD_DP_PARITY_ERROR"); return ERROR_FAIL; case STLINK_SWD_AP_WDATA_ERROR: LOG_DEBUG("STLINK_SWD_AP_WDATA_ERROR"); return ERROR_FAIL; case STLINK_SWD_AP_STICKY_ERROR: LOG_DEBUG("STLINK_SWD_AP_STICKY_ERROR"); return ERROR_FAIL; case STLINK_SWD_AP_STICKYORUN_ERROR: LOG_DEBUG("STLINK_SWD_AP_STICKYORUN_ERROR"); return ERROR_FAIL; default: LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]); return ERROR_FAIL; } } /** Issue an STLINK command via USB transfer, with retries on any wait status responses. Works for commands where the STLINK_DEBUG status is returned in the first byte of the response packet. For SWIM a SWIM_READSTATUS is requested instead. Returns an openocd result code. */ static int stlink_cmd_allow_retry(void *handle, const uint8_t *buf, int size) { int retries = 0; int res; struct stlink_usb_handle_s *h = handle; while (1) { if ((h->transport != HL_TRANSPORT_SWIM) || !retries) { res = stlink_usb_xfer(handle, buf, size); if (res != ERROR_OK) return res; } if (h->transport == HL_TRANSPORT_SWIM) { res = stlink_swim_status(handle); if (res != ERROR_OK) return res; } res = stlink_usb_error_check(handle); if (res == ERROR_WAIT && retries < MAX_WAIT_RETRIES) { usleep((1<version.stlink >= 2); if (jtag_libusb_bulk_read(h->fd, h->trace_ep, (char *)buf, size, STLINK_READ_TIMEOUT) != size) { LOG_ERROR("bulk trace read failed"); return ERROR_FAIL; } return ERROR_OK; } /* this function writes transfer length in the right place in the cb */ static void stlink_usb_set_cbw_transfer_datalength(void *handle, uint32_t size) { struct stlink_usb_handle_s *h = handle; buf_set_u32(h->cmdbuf+8, 0, 32, size); } static void stlink_usb_xfer_v1_create_cmd(void *handle, uint8_t direction, uint32_t size) { struct stlink_usb_handle_s *h = handle; /* fill the send buffer */ strcpy((char *)h->cmdbuf, "USBC"); h->cmdidx += 4; /* csw tag not used */ buf_set_u32(h->cmdbuf+h->cmdidx, 0, 32, 0); h->cmdidx += 4; /* cbw data transfer length (in the following data phase in or out) */ buf_set_u32(h->cmdbuf+h->cmdidx, 0, 32, size); h->cmdidx += 4; /* cbw flags */ h->cmdbuf[h->cmdidx++] = (direction == h->rx_ep ? ENDPOINT_IN : ENDPOINT_OUT); h->cmdbuf[h->cmdidx++] = 0; /* lun */ /* cdb clength (is filled in at xfer) */ h->cmdbuf[h->cmdidx++] = 0; } /** */ static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size) { struct stlink_usb_handle_s *h = handle; h->direction = direction; h->cmdidx = 0; memset(h->cmdbuf, 0, STLINK_SG_SIZE); memset(h->databuf, 0, STLINK_DATA_SIZE); if (h->version.stlink == 1) stlink_usb_xfer_v1_create_cmd(handle, direction, size); } /** */ static int stlink_usb_version(void *handle) { int res; uint32_t flags; uint16_t v; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 6); h->cmdbuf[h->cmdidx++] = STLINK_GET_VERSION; res = stlink_usb_xfer(handle, h->databuf, 6); if (res != ERROR_OK) return res; v = (h->databuf[0] << 8) | h->databuf[1]; h->version.stlink = (v >> 12) & 0x0f; h->version.jtag = (v >> 6) & 0x3f; h->version.swim = v & 0x3f; h->vid = buf_get_u32(h->databuf, 16, 16); h->pid = buf_get_u32(h->databuf, 32, 16); flags = 0; switch (h->version.stlink) { case 1: /* ST-LINK/V1 from J11 switch to api-v2 (and support SWD) */ if (h->version.jtag >= 11) h->version.jtag_api_max = STLINK_JTAG_API_V2; else h->version.jtag_api_max = STLINK_JTAG_API_V1; break; case 2: /* all ST-LINK/V2 and ST-Link/V2.1 use api-v2 */ h->version.jtag_api_max = STLINK_JTAG_API_V2; break; default: break; } h->version.flags = flags; LOG_INFO("STLINK v%d JTAG v%d API v%d SWIM v%d VID 0x%04X PID 0x%04X", h->version.stlink, h->version.jtag, (h->version.jtag_api_max == STLINK_JTAG_API_V1) ? 1 : 2, h->version.swim, h->vid, h->pid); return ERROR_OK; } static int stlink_usb_check_voltage(void *handle, float *target_voltage) { struct stlink_usb_handle_s *h = handle; uint32_t adc_results[2]; /* only supported by stlink/v2 and for firmware >= 13 */ if (h->version.stlink == 1 || h->version.jtag < 13) return ERROR_COMMAND_NOTFOUND; stlink_usb_init_buffer(handle, h->rx_ep, 8); h->cmdbuf[h->cmdidx++] = STLINK_GET_TARGET_VOLTAGE; int result = stlink_usb_xfer(handle, h->databuf, 8); if (result != ERROR_OK) return result; /* convert result */ adc_results[0] = le_to_h_u32(h->databuf); adc_results[1] = le_to_h_u32(h->databuf + 4); *target_voltage = 0; if (adc_results[0]) *target_voltage = 2 * ((float)adc_results[1]) * (float)(1.2 / adc_results[0]); LOG_INFO("Target voltage: %f", (double)*target_voltage); return ERROR_OK; } static int stlink_usb_set_swdclk(void *handle, uint16_t clk_divisor) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* only supported by stlink/v2 and for firmware >= 22 */ if (h->version.stlink == 1 || h->version.jtag < 22) return ERROR_COMMAND_NOTFOUND; stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_SWD_SET_FREQ; h_u16_to_le(h->cmdbuf+h->cmdidx, clk_divisor); h->cmdidx += 2; int result = stlink_cmd_allow_retry(handle, h->databuf, 2); if (result != ERROR_OK) return result; return ERROR_OK; } static int stlink_usb_set_jtagclk(void *handle, uint16_t clk_divisor) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* only supported by stlink/v2 and for firmware >= 24 */ if (h->version.stlink == 1 || h->version.jtag < 24) return ERROR_COMMAND_NOTFOUND; stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_JTAG_SET_FREQ; h_u16_to_le(h->cmdbuf+h->cmdidx, clk_divisor); h->cmdidx += 2; int result = stlink_cmd_allow_retry(handle, h->databuf, 2); if (result != ERROR_OK) return result; return ERROR_OK; } /** */ static int stlink_usb_current_mode(void *handle, uint8_t *mode) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_GET_CURRENT_MODE; res = stlink_usb_xfer(handle, h->databuf, 2); if (res != ERROR_OK) return res; *mode = h->databuf[0]; return ERROR_OK; } /** */ static int stlink_usb_mode_enter(void *handle, enum stlink_mode type) { int rx_size = 0; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* on api V2 we are able the read the latest command * status * TODO: we need the test on api V1 too */ if (h->jtag_api == STLINK_JTAG_API_V2) rx_size = 2; stlink_usb_init_buffer(handle, h->rx_ep, rx_size); switch (type) { case STLINK_MODE_DEBUG_JTAG: h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_ENTER; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_ENTER; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_ENTER_JTAG; break; case STLINK_MODE_DEBUG_SWD: h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_ENTER; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_ENTER; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_ENTER_SWD; break; case STLINK_MODE_DEBUG_SWIM: h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_ENTER; /* no answer for this function... */ rx_size = 0; break; case STLINK_MODE_DFU: case STLINK_MODE_MASS: default: return ERROR_FAIL; } return stlink_cmd_allow_retry(handle, h->databuf, rx_size); } /** */ static int stlink_usb_mode_leave(void *handle, enum stlink_mode type) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, STLINK_NULL_EP, 0); switch (type) { case STLINK_MODE_DEBUG_JTAG: case STLINK_MODE_DEBUG_SWD: h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_EXIT; break; case STLINK_MODE_DEBUG_SWIM: h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_EXIT; break; case STLINK_MODE_DFU: h->cmdbuf[h->cmdidx++] = STLINK_DFU_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DFU_EXIT; break; case STLINK_MODE_MASS: default: return ERROR_FAIL; } res = stlink_usb_xfer(handle, 0, 0); if (res != ERROR_OK) return res; return ERROR_OK; } static int stlink_usb_assert_srst(void *handle, int srst); static enum stlink_mode stlink_get_mode(enum hl_transports t) { switch (t) { case HL_TRANSPORT_SWD: return STLINK_MODE_DEBUG_SWD; case HL_TRANSPORT_JTAG: return STLINK_MODE_DEBUG_JTAG; case HL_TRANSPORT_SWIM: return STLINK_MODE_DEBUG_SWIM; default: return STLINK_MODE_UNKNOWN; } } /** */ static int stlink_usb_init_mode(void *handle, bool connect_under_reset) { int res; uint8_t mode; enum stlink_mode emode; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); res = stlink_usb_current_mode(handle, &mode); if (res != ERROR_OK) return res; LOG_DEBUG("MODE: 0x%02X", mode); /* try to exit current mode */ switch (mode) { case STLINK_DEV_DFU_MODE: emode = STLINK_MODE_DFU; break; case STLINK_DEV_DEBUG_MODE: emode = STLINK_MODE_DEBUG_SWD; break; case STLINK_DEV_SWIM_MODE: emode = STLINK_MODE_DEBUG_SWIM; break; case STLINK_DEV_BOOTLOADER_MODE: case STLINK_DEV_MASS_MODE: default: emode = STLINK_MODE_UNKNOWN; break; } if (emode != STLINK_MODE_UNKNOWN) { res = stlink_usb_mode_leave(handle, emode); if (res != ERROR_OK) return res; } res = stlink_usb_current_mode(handle, &mode); if (res != ERROR_OK) return res; /* we check the target voltage here as an aid to debugging connection problems. * the stlink requires the target Vdd to be connected for reliable debugging. * this cmd is supported in all modes except DFU */ if (mode != STLINK_DEV_DFU_MODE) { float target_voltage; /* check target voltage (if supported) */ res = stlink_usb_check_voltage(h, &target_voltage); if (res != ERROR_OK) { if (res != ERROR_COMMAND_NOTFOUND) LOG_ERROR("voltage check failed"); /* attempt to continue as it is not a catastrophic failure */ } else { /* check for a sensible target voltage, operating range is 1.65-5.5v * according to datasheet */ if (target_voltage < 1.5) LOG_ERROR("target voltage may be too low for reliable debugging"); } } LOG_DEBUG("MODE: 0x%02X", mode); /* set selected mode */ emode = stlink_get_mode(h->transport); if (emode == STLINK_MODE_UNKNOWN) { LOG_ERROR("selected mode (transport) not supported"); return ERROR_FAIL; } /* preliminary SRST assert: * We want SRST is asserted before activating debug signals (mode_enter). * As the required mode has not been set, the adapter may not know what pin to use. * Tested firmware STLINK v2 JTAG v29 API v2 SWIM v0 uses T_NRST pin by default * Tested firmware STLINK v2 JTAG v27 API v2 SWIM v6 uses T_NRST pin by default * after power on, SWIM_RST stays unchanged */ if (connect_under_reset && emode != STLINK_MODE_DEBUG_SWIM) stlink_usb_assert_srst(handle, 0); /* do not check the return status here, we will proceed and enter the desired mode below and try asserting srst again. */ res = stlink_usb_mode_enter(handle, emode); if (res != ERROR_OK) return res; /* assert SRST again: a little bit late but now the adapter knows for sure what pin to use */ if (connect_under_reset) { res = stlink_usb_assert_srst(handle, 0); if (res != ERROR_OK) return res; } res = stlink_usb_current_mode(handle, &mode); if (res != ERROR_OK) return res; LOG_DEBUG("MODE: 0x%02X", mode); return ERROR_OK; } /* request status from last swim request */ static int stlink_swim_status(void *handle) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 4); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READSTATUS; res = stlink_usb_xfer(handle, h->databuf, 4); if (res != ERROR_OK) return res; return ERROR_OK; } /* the purpose of this function is unknown... capabilites? anyway for swim v6 it returns 0001020600000000 */ __attribute__((unused)) static int stlink_swim_cap(void *handle, uint8_t *cap) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 8); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READ_CAP; h->cmdbuf[h->cmdidx++] = 0x01; res = stlink_usb_xfer(handle, h->databuf, 8); if (res != ERROR_OK) return res; memcpy(cap, h->databuf, 8); return ERROR_OK; } /* debug dongle assert/deassert sreset line */ static int stlink_swim_assert_reset(void *handle, int reset) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; if (!reset) h->cmdbuf[h->cmdidx++] = STLINK_SWIM_ASSERT_RESET; else h->cmdbuf[h->cmdidx++] = STLINK_SWIM_DEASSERT_RESET; res = stlink_cmd_allow_retry(handle, h->databuf, 0); if (res != ERROR_OK) return res; return ERROR_OK; } /* send swim enter seq 1.3ms low then 750Hz then 1.5kHz */ static int stlink_swim_enter(void *handle) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_ENTER_SEQ; res = stlink_cmd_allow_retry(handle, h->databuf, 0); if (res != ERROR_OK) return res; return ERROR_OK; } /* switch high/low speed swim */ static int stlink_swim_speed(void *handle, int speed) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_SPEED; if (speed) h->cmdbuf[h->cmdidx++] = 1; else h->cmdbuf[h->cmdidx++] = 0; res = stlink_cmd_allow_retry(handle, h->databuf, 0); if (res != ERROR_OK) return res; return ERROR_OK; } /* initiate srst from swim. nrst is pulled low for 50us. */ static int stlink_swim_generate_rst(void *handle) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_GEN_RST; res = stlink_cmd_allow_retry(handle, h->databuf, 0); if (res != ERROR_OK) return res; return ERROR_OK; } /* send resyncronize sequence swim is pulled low for 16us reply is 64 clks low */ static int stlink_swim_resync(void *handle) { struct stlink_usb_handle_s *h = handle; int res; stlink_usb_init_buffer(handle, h->rx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_RESET; res = stlink_cmd_allow_retry(handle, h->databuf, 0); if (res != ERROR_OK) return res; return ERROR_OK; } static int stlink_swim_writebytes(void *handle, uint32_t addr, uint32_t len, const uint8_t *data) { struct stlink_usb_handle_s *h = handle; int res; unsigned int i; unsigned int datalen = 0; int cmdsize = STLINK_CMD_SIZE_V2; if (len > STLINK_DATA_SIZE) return ERROR_FAIL; if (h->version.stlink == 1) cmdsize = STLINK_SG_SIZE; stlink_usb_init_buffer(handle, h->tx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_WRITEMEM; h_u16_to_be(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; h_u32_to_be(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; for (i = 0; i < len; i++) { if (h->cmdidx == cmdsize) h->databuf[datalen++] = *(data++); else h->cmdbuf[h->cmdidx++] = *(data++); } if (h->version.stlink == 1) stlink_usb_set_cbw_transfer_datalength(handle, datalen); res = stlink_cmd_allow_retry(handle, h->databuf, datalen); if (res != ERROR_OK) return res; return ERROR_OK; } static int stlink_swim_readbytes(void *handle, uint32_t addr, uint32_t len, uint8_t *data) { struct stlink_usb_handle_s *h = handle; int res; if (len > STLINK_DATA_SIZE) return ERROR_FAIL; stlink_usb_init_buffer(handle, h->rx_ep, 0); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READMEM; h_u16_to_be(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; h_u32_to_be(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; res = stlink_cmd_allow_retry(handle, h->databuf, 0); if (res != ERROR_OK) return res; stlink_usb_init_buffer(handle, h->rx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READBUF; res = stlink_usb_xfer(handle, data, len); if (res != ERROR_OK) return res; return ERROR_OK; } /** */ static int stlink_usb_idcode(void *handle, uint32_t *idcode) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* there is no swim read core id cmd */ if (h->transport == HL_TRANSPORT_SWIM) { *idcode = 0; return ERROR_OK; } stlink_usb_init_buffer(handle, h->rx_ep, 4); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID; res = stlink_usb_xfer(handle, h->databuf, 4); if (res != ERROR_OK) return res; *idcode = le_to_h_u32(h->databuf); LOG_DEBUG("IDCODE: 0x%08" PRIX32, *idcode); return ERROR_OK; } static int stlink_usb_v2_read_debug_reg(void *handle, uint32_t addr, uint32_t *val) { struct stlink_usb_handle_s *h = handle; int res; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 8); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READDEBUGREG; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; res = stlink_cmd_allow_retry(handle, h->databuf, 8); if (res != ERROR_OK) return res; *val = le_to_h_u32(h->databuf + 4); return ERROR_OK; } static int stlink_usb_write_debug_reg(void *handle, uint32_t addr, uint32_t val) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEDEBUGREG; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEDEBUGREG; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u32_to_le(h->cmdbuf+h->cmdidx, val); h->cmdidx += 4; return stlink_cmd_allow_retry(handle, h->databuf, 2); } /** */ static int stlink_usb_trace_read(void *handle, uint8_t *buf, size_t *size) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->trace.enabled && h->version.jtag >= STLINK_TRACE_MIN_VERSION) { int res; stlink_usb_init_buffer(handle, h->rx_ep, 10); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GET_TRACE_NB; res = stlink_usb_xfer(handle, h->databuf, 2); if (res != ERROR_OK) return res; size_t bytes_avail = le_to_h_u16(h->databuf); *size = bytes_avail < *size ? bytes_avail : *size - 1; if (*size > 0) { res = stlink_usb_read_trace(handle, buf, *size); if (res != ERROR_OK) return res; return ERROR_OK; } } *size = 0; return ERROR_OK; } static enum target_state stlink_usb_v2_get_status(void *handle) { int result; uint32_t status; result = stlink_usb_v2_read_debug_reg(handle, DCB_DHCSR, &status); if (result != ERROR_OK) return TARGET_UNKNOWN; if (status & S_HALT) return TARGET_HALTED; else if (status & S_RESET_ST) return TARGET_RESET; return TARGET_RUNNING; } /** */ static enum target_state stlink_usb_state(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->transport == HL_TRANSPORT_SWIM) { res = stlink_usb_mode_enter(handle, stlink_get_mode(h->transport)); if (res != ERROR_OK) return TARGET_UNKNOWN; res = stlink_swim_resync(handle); if (res != ERROR_OK) return TARGET_UNKNOWN; return ERROR_OK; } if (h->reconnect_pending) { LOG_INFO("Previous state query failed, trying to reconnect"); res = stlink_usb_mode_enter(handle, stlink_get_mode(h->transport)); if (res != ERROR_OK) return TARGET_UNKNOWN; h->reconnect_pending = false; } if (h->jtag_api == STLINK_JTAG_API_V2) { res = stlink_usb_v2_get_status(handle); if (res == TARGET_UNKNOWN) h->reconnect_pending = true; return res; } stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_GETSTATUS; res = stlink_usb_xfer(handle, h->databuf, 2); if (res != ERROR_OK) return TARGET_UNKNOWN; if (h->databuf[0] == STLINK_CORE_RUNNING) return TARGET_RUNNING; if (h->databuf[0] == STLINK_CORE_HALTED) return TARGET_HALTED; h->reconnect_pending = true; return TARGET_UNKNOWN; } static int stlink_usb_assert_srst(void *handle, int srst) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->transport == HL_TRANSPORT_SWIM) return stlink_swim_assert_reset(handle, srst); if (h->version.stlink == 1) return ERROR_COMMAND_NOTFOUND; stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_DRIVE_NRST; h->cmdbuf[h->cmdidx++] = srst; return stlink_cmd_allow_retry(handle, h->databuf, 2); } /** */ static void stlink_usb_trace_disable(void *handle) { int res = ERROR_OK; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); assert(h->version.jtag >= STLINK_TRACE_MIN_VERSION); LOG_DEBUG("Tracing: disable"); stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_STOP_TRACE_RX; res = stlink_usb_xfer(handle, h->databuf, 2); if (res == ERROR_OK) h->trace.enabled = false; } /** */ static int stlink_usb_trace_enable(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->version.jtag >= STLINK_TRACE_MIN_VERSION) { stlink_usb_init_buffer(handle, h->rx_ep, 10); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_START_TRACE_RX; h_u16_to_le(h->cmdbuf+h->cmdidx, (uint16_t)STLINK_TRACE_SIZE); h->cmdidx += 2; h_u32_to_le(h->cmdbuf+h->cmdidx, h->trace.source_hz); h->cmdidx += 4; res = stlink_usb_xfer(handle, h->databuf, 2); if (res == ERROR_OK) { h->trace.enabled = true; LOG_DEBUG("Tracing: recording at %" PRIu32 "Hz", h->trace.source_hz); } } else { LOG_ERROR("Tracing is not supported by this version."); res = ERROR_FAIL; } return res; } /** */ static int stlink_usb_reset(void *handle) { struct stlink_usb_handle_s *h = handle; int retval; assert(handle != NULL); if (h->transport == HL_TRANSPORT_SWIM) return stlink_swim_generate_rst(handle); stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_RESETSYS; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_RESETSYS; retval = stlink_cmd_allow_retry(handle, h->databuf, 2); if (retval != ERROR_OK) return retval; if (h->trace.enabled) { stlink_usb_trace_disable(h); return stlink_usb_trace_enable(h); } return ERROR_OK; } /** */ static int stlink_usb_run(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->jtag_api == STLINK_JTAG_API_V2) { res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN); return res; } stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_RUNCORE; return stlink_cmd_allow_retry(handle, h->databuf, 2); } /** */ static int stlink_usb_halt(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->jtag_api == STLINK_JTAG_API_V2) { res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); return res; } stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_FORCEDEBUG; return stlink_cmd_allow_retry(handle, h->databuf, 2); } /** */ static int stlink_usb_step(void *handle) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->jtag_api == STLINK_JTAG_API_V2) { /* TODO: this emulates the v1 api, it should really use a similar auto mask isr * that the Cortex-M3 currently does. */ stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_MASKINTS|C_DEBUGEN); stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_STEP|C_MASKINTS|C_DEBUGEN); return stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN); } stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_STEPCORE; return stlink_cmd_allow_retry(handle, h->databuf, 2); } /** */ static int stlink_usb_read_regs(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 84); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READALLREGS; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READALLREGS; res = stlink_usb_xfer(handle, h->databuf, 84); if (res != ERROR_OK) return res; return ERROR_OK; } /** */ static int stlink_usb_read_reg(void *handle, int num, uint32_t *val) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, h->jtag_api == STLINK_JTAG_API_V1 ? 4 : 8); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READREG; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READREG; h->cmdbuf[h->cmdidx++] = num; if (h->jtag_api == STLINK_JTAG_API_V1) { res = stlink_usb_xfer(handle, h->databuf, 4); if (res != ERROR_OK) return res; *val = le_to_h_u32(h->databuf); return ERROR_OK; } else { res = stlink_cmd_allow_retry(handle, h->databuf, 8); if (res != ERROR_OK) return res; *val = le_to_h_u32(h->databuf + 4); return ERROR_OK; } } /** */ static int stlink_usb_write_reg(void *handle, int num, uint32_t val) { struct stlink_usb_handle_s *h = handle; assert(handle != NULL); stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; if (h->jtag_api == STLINK_JTAG_API_V1) h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEREG; else h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEREG; h->cmdbuf[h->cmdidx++] = num; h_u32_to_le(h->cmdbuf+h->cmdidx, val); h->cmdidx += 4; return stlink_cmd_allow_retry(handle, h->databuf, 2); } static int stlink_usb_get_rw_status(void *handle) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); if (h->jtag_api == STLINK_JTAG_API_V1) return ERROR_OK; stlink_usb_init_buffer(handle, h->rx_ep, 2); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS; res = stlink_usb_xfer(handle, h->databuf, 2); if (res != ERROR_OK) return res; return stlink_usb_error_check(h); } /** */ static int stlink_usb_read_mem8(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer) { int res; uint16_t read_len = len; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* max 8bit read/write is 64bytes */ if (len > STLINK_MAX_RW8) { LOG_DEBUG("max buffer length exceeded"); return ERROR_FAIL; } stlink_usb_init_buffer(handle, h->rx_ep, read_len); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READMEM_8BIT; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; /* we need to fix read length for single bytes */ if (read_len == 1) read_len++; res = stlink_usb_xfer(handle, h->databuf, read_len); if (res != ERROR_OK) return res; memcpy(buffer, h->databuf, len); return stlink_usb_get_rw_status(handle); } /** */ static int stlink_usb_write_mem8(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* max 8bit read/write is 64bytes */ if (len > STLINK_MAX_RW8) { LOG_DEBUG("max buffer length exceeded"); return ERROR_FAIL; } stlink_usb_init_buffer(handle, h->tx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_WRITEMEM_8BIT; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; res = stlink_usb_xfer(handle, buffer, len); if (res != ERROR_OK) return res; return stlink_usb_get_rw_status(handle); } /** */ static int stlink_usb_read_mem16(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* only supported by stlink/v2 and for firmware >= 26 */ if (h->jtag_api == STLINK_JTAG_API_V1 || (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26)) return ERROR_COMMAND_NOTFOUND; /* data must be a multiple of 2 and half-word aligned */ if (len % 2 || addr % 2) { LOG_DEBUG("Invalid data alignment"); return ERROR_TARGET_UNALIGNED_ACCESS; } stlink_usb_init_buffer(handle, h->rx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READMEM_16BIT; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; res = stlink_usb_xfer(handle, h->databuf, len); if (res != ERROR_OK) return res; memcpy(buffer, h->databuf, len); return stlink_usb_get_rw_status(handle); } /** */ static int stlink_usb_write_mem16(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* only supported by stlink/v2 and for firmware >= 26 */ if (h->jtag_api == STLINK_JTAG_API_V1 || (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26)) return ERROR_COMMAND_NOTFOUND; /* data must be a multiple of 2 and half-word aligned */ if (len % 2 || addr % 2) { LOG_DEBUG("Invalid data alignment"); return ERROR_TARGET_UNALIGNED_ACCESS; } stlink_usb_init_buffer(handle, h->tx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEMEM_16BIT; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; res = stlink_usb_xfer(handle, buffer, len); if (res != ERROR_OK) return res; return stlink_usb_get_rw_status(handle); } /** */ static int stlink_usb_read_mem32(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* data must be a multiple of 4 and word aligned */ if (len % 4 || addr % 4) { LOG_DEBUG("Invalid data alignment"); return ERROR_TARGET_UNALIGNED_ACCESS; } stlink_usb_init_buffer(handle, h->rx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READMEM_32BIT; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; res = stlink_usb_xfer(handle, h->databuf, len); if (res != ERROR_OK) return res; memcpy(buffer, h->databuf, len); return stlink_usb_get_rw_status(handle); } /** */ static int stlink_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer) { int res; struct stlink_usb_handle_s *h = handle; assert(handle != NULL); /* data must be a multiple of 4 and word aligned */ if (len % 4 || addr % 4) { LOG_DEBUG("Invalid data alignment"); return ERROR_TARGET_UNALIGNED_ACCESS; } stlink_usb_init_buffer(handle, h->tx_ep, len); h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND; h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_WRITEMEM_32BIT; h_u32_to_le(h->cmdbuf+h->cmdidx, addr); h->cmdidx += 4; h_u16_to_le(h->cmdbuf+h->cmdidx, len); h->cmdidx += 2; res = stlink_usb_xfer(handle, buffer, len); if (res != ERROR_OK) return res; return stlink_usb_get_rw_status(handle); } static uint32_t stlink_max_block_size(uint32_t tar_autoincr_block, uint32_t address) { uint32_t max_tar_block = (tar_autoincr_block - ((tar_autoincr_block - 1) & address)); if (max_tar_block == 0) max_tar_block = 4; return max_tar_block; } static int stlink_usb_read_mem(void *handle, uint32_t addr, uint32_t size, uint32_t count, uint8_t *buffer) { int retval = ERROR_OK; uint32_t bytes_remaining; int retries = 0; struct stlink_usb_handle_s *h = handle; /* calculate byte count */ count *= size; /* switch to 8 bit if stlink does not support 16 bit memory read */ if (size == 2 && (h->jtag_api == STLINK_JTAG_API_V1 || (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26))) size = 1; while (count) { bytes_remaining = (size != 1) ? \ stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8; if (count < bytes_remaining) bytes_remaining = count; if (h->transport == HL_TRANSPORT_SWIM) { retval = stlink_swim_readbytes(handle, addr, bytes_remaining, buffer); if (retval != ERROR_OK) return retval; } else /* * all stlink support 8/32bit memory read/writes and only from * stlink V2J26 there is support for 16 bit memory read/write. * Honour 32 bit and, if possible, 16 bit too. Otherwise, handle * as 8bit access. */ if (size != 1) { /* When in jtag mode the stlink uses the auto-increment functionality. * However it expects us to pass the data correctly, this includes * alignment and any page boundaries. We already do this as part of the * adi_v5 implementation, but the stlink is a hla adapter and so this * needs implementing manually. * currently this only affects jtag mode, according to ST they do single * access in SWD mode - but this may change and so we do it for both modes */ /* we first need to check for any unaligned bytes */ if (addr & (size - 1)) { uint32_t head_bytes = size - (addr & (size - 1)); retval = stlink_usb_read_mem8(handle, addr, head_bytes, buffer); if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) { usleep((1<jtag_api == STLINK_JTAG_API_V1 || (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26))) size = 1; while (count) { bytes_remaining = (size != 1) ? \ stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8; if (count < bytes_remaining) bytes_remaining = count; if (h->transport == HL_TRANSPORT_SWIM) { retval = stlink_swim_writebytes(handle, addr, bytes_remaining, buffer); if (retval != ERROR_OK) return retval; } else /* * all stlink support 8/32bit memory read/writes and only from * stlink V2J26 there is support for 16 bit memory read/write. * Honour 32 bit and, if possible, 16 bit too. Otherwise, handle * as 8bit access. */ if (size != 1) { /* When in jtag mode the stlink uses the auto-increment functionality. * However it expects us to pass the data correctly, this includes * alignment and any page boundaries. We already do this as part of the * adi_v5 implementation, but the stlink is a hla adapter and so this * needs implementing manually. * currently this only affects jtag mode, according to ST they do single * access in SWD mode - but this may change and so we do it for both modes */ /* we first need to check for any unaligned bytes */ if (addr & (size - 1)) { uint32_t head_bytes = size - (addr & (size - 1)); retval = stlink_usb_write_mem8(handle, addr, head_bytes, buffer); if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) { usleep((1< 0) ? current_diff : -current_diff; if ((current_diff < speed_diff) && khz >= map[i].speed) { speed_diff = current_diff; speed_index = i; } } } if (speed_index == -1) { /* this will only be here if we cannot match the slow speed. * use the slowest speed we support.*/ speed_index = map_size - 1; match = false; } else if (i == map_size) match = false; if (!match && query) { LOG_INFO("Unable to match requested speed %d kHz, using %d kHz", \ khz, map[speed_index].speed); } return speed_index; } static int stlink_speed_swd(void *handle, int khz, bool query) { int speed_index; struct stlink_usb_handle_s *h = handle; /* only supported by stlink/v2 and for firmware >= 22 */ if (h->version.stlink == 1 || h->version.jtag < 22) return khz; speed_index = stlink_match_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd), khz, query); if (!query) { int result = stlink_usb_set_swdclk(h, stlink_khz_to_speed_map_swd[speed_index].speed_divisor); if (result != ERROR_OK) { LOG_ERROR("Unable to set adapter speed"); return khz; } } return stlink_khz_to_speed_map_swd[speed_index].speed; } static int stlink_speed_jtag(void *handle, int khz, bool query) { int speed_index; struct stlink_usb_handle_s *h = handle; /* only supported by stlink/v2 and for firmware >= 24 */ if (h->version.stlink == 1 || h->version.jtag < 24) return khz; speed_index = stlink_match_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag), khz, query); if (!query) { int result = stlink_usb_set_jtagclk(h, stlink_khz_to_speed_map_jtag[speed_index].speed_divisor); if (result != ERROR_OK) { LOG_ERROR("Unable to set adapter speed"); return khz; } } return stlink_khz_to_speed_map_jtag[speed_index].speed; } void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size) { unsigned int i; LOG_DEBUG("Supported clock speeds are:"); for (i = 0; i < map_size; i++) LOG_DEBUG("%d kHz", map[i].speed); } static int stlink_speed(void *handle, int khz, bool query) { struct stlink_usb_handle_s *h = handle; if (!handle) return khz; if (h->transport == HL_TRANSPORT_SWIM) return stlink_speed_swim(handle, khz, query); else if (h->transport == HL_TRANSPORT_SWD) return stlink_speed_swd(handle, khz, query); else if (h->transport == HL_TRANSPORT_JTAG) return stlink_speed_jtag(handle, khz, query); return khz; } /** */ static int stlink_usb_close(void *handle) { int res; uint8_t mode; enum stlink_mode emode; struct stlink_usb_handle_s *h = handle; if (h && h->fd) res = stlink_usb_current_mode(handle, &mode); else res = ERROR_FAIL; /* do not exit if return code != ERROR_OK, it prevents us from closing jtag_libusb */ if (res == ERROR_OK) { /* try to exit current mode */ switch (mode) { case STLINK_DEV_DFU_MODE: emode = STLINK_MODE_DFU; break; case STLINK_DEV_DEBUG_MODE: emode = STLINK_MODE_DEBUG_SWD; break; case STLINK_DEV_SWIM_MODE: emode = STLINK_MODE_DEBUG_SWIM; break; case STLINK_DEV_BOOTLOADER_MODE: case STLINK_DEV_MASS_MODE: default: emode = STLINK_MODE_UNKNOWN; break; } if (emode != STLINK_MODE_UNKNOWN) stlink_usb_mode_leave(handle, emode); /* do not check return code, it prevent us from closing jtag_libusb */ } if (h && h->fd) jtag_libusb_close(h->fd); free(h); return ERROR_OK; } /** */ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd) { int err, retry_count = 1; struct stlink_usb_handle_s *h; enum stlink_jtag_api_version api; LOG_DEBUG("stlink_usb_open"); h = calloc(1, sizeof(struct stlink_usb_handle_s)); if (h == 0) { LOG_DEBUG("malloc failed"); return ERROR_FAIL; } h->transport = param->transport; for (unsigned i = 0; param->vid[i]; i++) { LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x serial: %s", param->transport, param->vid[i], param->pid[i], param->serial ? param->serial : ""); } /* On certain host USB configurations(e.g. MacBook Air) STLINKv2 dongle seems to have its FW in a funky state if, after plugging it in, you try to use openocd with it more then once (by launching and closing openocd). In cases like that initial attempt to read the FW info via stlink_usb_version will fail and the device has to be reset in order to become operational. */ do { if (jtag_libusb_open(param->vid, param->pid, param->serial, &h->fd) != ERROR_OK) { LOG_ERROR("open failed"); goto error_open; } jtag_libusb_set_configuration(h->fd, 0); if (jtag_libusb_claim_interface(h->fd, 0) != ERROR_OK) { LOG_DEBUG("claim interface failed"); goto error_open; } /* RX EP is common for all versions */ h->rx_ep = STLINK_RX_EP; uint16_t pid; if (jtag_libusb_get_pid(jtag_libusb_get_device(h->fd), &pid) != ERROR_OK) { LOG_DEBUG("libusb_get_pid failed"); goto error_open; } /* wrap version for first read */ switch (pid) { case STLINK_V1_PID: h->version.stlink = 1; h->tx_ep = STLINK_TX_EP; h->trace_ep = STLINK_TRACE_EP; break; case STLINK_V2_1_PID: case STLINK_V2_1_NO_MSD_PID: h->version.stlink = 2; h->tx_ep = STLINK_V2_1_TX_EP; h->trace_ep = STLINK_V2_1_TRACE_EP; break; default: /* fall through - we assume V2 to be the default version*/ case STLINK_V2_PID: h->version.stlink = 2; h->tx_ep = STLINK_TX_EP; h->trace_ep = STLINK_TRACE_EP; break; } /* get the device version */ err = stlink_usb_version(h); if (err == ERROR_OK) { break; } else if (h->version.stlink == 1 || retry_count == 0) { LOG_ERROR("read version failed"); goto error_open; } else { err = jtag_libusb_release_interface(h->fd, 0); if (err != ERROR_OK) { LOG_ERROR("release interface failed"); goto error_open; } err = jtag_libusb_reset_device(h->fd); if (err != ERROR_OK) { LOG_ERROR("reset device failed"); goto error_open; } jtag_libusb_close(h->fd); /* Give the device one second to settle down and reenumerate. */ usleep(1 * 1000 * 1000); retry_count--; } } while (1); /* check if mode is supported */ err = ERROR_OK; switch (h->transport) { case HL_TRANSPORT_SWD: if (h->version.jtag_api_max == STLINK_JTAG_API_V1) err = ERROR_FAIL; /* fall-through */ case HL_TRANSPORT_JTAG: if (h->version.jtag == 0) err = ERROR_FAIL; break; case HL_TRANSPORT_SWIM: if (h->version.swim == 0) err = ERROR_FAIL; break; default: err = ERROR_FAIL; break; } if (err != ERROR_OK) { LOG_ERROR("mode (transport) not supported by device"); goto error_open; } api = h->version.jtag_api_max; LOG_INFO("using stlink api v%d", api); /* set the used jtag api, this will default to the newest supported version */ h->jtag_api = api; /* initialize the debug hardware */ err = stlink_usb_init_mode(h, param->connect_under_reset); if (err != ERROR_OK) { LOG_ERROR("init mode failed (unable to connect to the target)"); goto error_open; } if (h->transport == HL_TRANSPORT_SWIM) { err = stlink_swim_enter(h); if (err != ERROR_OK) { LOG_ERROR("stlink_swim_enter_failed (unable to connect to the target)"); goto error_open; } *fd = h; h->max_mem_packet = STLINK_DATA_SIZE; return ERROR_OK; } if (h->transport == HL_TRANSPORT_JTAG) { /* jtag clock speed only supported by stlink/v2 and for firmware >= 24 */ if (h->version.stlink >= 2 && h->version.jtag >= 24) { stlink_dump_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag)); stlink_speed(h, param->initial_interface_speed, false); } } else if (h->transport == HL_TRANSPORT_SWD) { /* clock speed only supported by stlink/v2 and for firmware >= 22 */ if (h->version.stlink >= 2 && h->version.jtag >= 22) { stlink_dump_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd)); stlink_speed(h, param->initial_interface_speed, false); } } /* get cpuid, so we can determine the max page size * start with a safe default */ h->max_mem_packet = (1 << 10); uint8_t buffer[4]; err = stlink_usb_read_mem32(h, CPUID, 4, buffer); if (err == ERROR_OK) { uint32_t cpuid = le_to_h_u32(buffer); int i = (cpuid >> 4) & 0xf; if (i == 4 || i == 3) { /* Cortex-M3/M4 has 4096 bytes autoincrement range */ h->max_mem_packet = (1 << 12); } } LOG_DEBUG("Using TAR autoincrement: %" PRIu32, h->max_mem_packet); *fd = h; return ERROR_OK; error_open: stlink_usb_close(h); return ERROR_FAIL; } int stlink_config_trace(void *handle, bool enabled, enum tpiu_pin_protocol pin_protocol, uint32_t port_size, unsigned int *trace_freq) { struct stlink_usb_handle_s *h = handle; if (enabled && (h->jtag_api < 2 || pin_protocol != TPIU_PIN_PROTOCOL_ASYNC_UART)) { LOG_ERROR("The attached ST-LINK version doesn't support this trace mode"); return ERROR_FAIL; } if (!enabled) { stlink_usb_trace_disable(h); return ERROR_OK; } if (*trace_freq > STLINK_TRACE_MAX_HZ) { LOG_ERROR("ST-LINK doesn't support SWO frequency higher than %u", STLINK_TRACE_MAX_HZ); return ERROR_FAIL; } stlink_usb_trace_disable(h); if (!*trace_freq) *trace_freq = STLINK_TRACE_MAX_HZ; h->trace.source_hz = *trace_freq; return stlink_usb_trace_enable(h); } /** */ struct hl_layout_api_s stlink_usb_layout_api = { /** */ .open = stlink_usb_open, /** */ .close = stlink_usb_close, /** */ .idcode = stlink_usb_idcode, /** */ .state = stlink_usb_state, /** */ .reset = stlink_usb_reset, /** */ .assert_srst = stlink_usb_assert_srst, /** */ .run = stlink_usb_run, /** */ .halt = stlink_usb_halt, /** */ .step = stlink_usb_step, /** */ .read_regs = stlink_usb_read_regs, /** */ .read_reg = stlink_usb_read_reg, /** */ .write_reg = stlink_usb_write_reg, /** */ .read_mem = stlink_usb_read_mem, /** */ .write_mem = stlink_usb_write_mem, /** */ .write_debug_reg = stlink_usb_write_debug_reg, /** */ .override_target = stlink_usb_override_target, /** */ .speed = stlink_speed, /** */ .config_trace = stlink_config_trace, /** */ .poll_trace = stlink_usb_trace_read, };