/** @page tasks Pending and Open Tasks This page lists pending and open tasks being considered or worked upon by the OpenOCD community. @section thelist The List Items with a current patch available should include a link to its posting on the openocd-developer mailing list archives. Some items may be in progress, usually indicated by the individual whose initials in parentheses following it. A key for decoding these initials appears after The List. Most items are open for the taking, but please post to the mailing list before spending much time working on anything lists here. The community may have evolved an idea since it was added here. Feel free to send patches to add or clarify items on this list, too. @section thelisttcl TCL This section provides possible things to improve with OpenOCD's TCL support. - organize the TCL configurations: - provide more directory structure for boards/targets? - factor configurations into layers (encapsulation and re-use) - Isolate all TCL command support: - Pure C CLI implementations using --disable-builtin-tcl. - Allow developers to build new dongles using OpenOCD's JTAG core. - At first, provide only low-level JTAG support; target layer and above rely heavily on scripting event mechanisms. - Allow full TCL support? add --with-tcl=/path/to/installed/tcl - Move TCL support out of foo.[ch] and into foo_tcl.[ch] (other ideas?) @section thelistjtag JTAG This section list issues that need to be resolved in the JTAG layer. @subsection thelistjtagcore JTAG Core The following tasks have been suggeted for cleaning up the JTAG layer: - use tap_set_state everywhere to allow logging TAP state transitions - rename other tap_states to use standard JTAG names (suggested by ML) - retire jtag_add_end_state() and replace w/global variable: - removes TAP_INVALID as an argument to jtag_add_xxxx(). - global variable as argument to jtag_add_xxxx() should be phased out, but it is useful while we need to bug-by-bug compatible while testing changes. - Suggested by ØH. Michael Bruck also interested in this. - Encapsulate cmd_queue_cur_state and related varaible handling. The following tasks have been suggested for adding new core JTAG support: - autodetect devices present on the scan chain - implement 'discover_taps' command - SPI/UART emulation: - (ab)use bit-banging JTAG interfaces to emulate SPI/UART - allow SPI to program flash, MCUs, etc. @subsection thelistjtaginterfaces JTAG Interfaces The following tasks have been suggeted for improving OpenOCD's JTAG interface support: - rework USB communication to be more robust. Two possible options are: -# use libusb-1.0.1 with libusb-compat-0.1.1 (non-blocking I/O wrapper) -# rewrite implementation to use non-blocking I/O - FT2232 driver: - integrate FTD2XX High-Speed Device support @par PATCH: https://lists.berlios.de/pipermail/openocd-development/2009-April/005479.html - fix outstanding bugs - J-Link driver: - fix to work with long scan chains, such as R.Doss's svf test. - fix other outstanding bugs The following tasks have been suggested for adding new JTAG interfaces: - TCP driver: allow client/server for remote JTAG interface control. @section thelistswd Serial Wire Debug - implement Serial Wire Debug interface @section thelistbs Boundary Scan Support - add STAPL support? - add BSDL support? A few possible options for the above: -# Fake a TCL equivalent? -# Integrate an existing library? -# Write a new C implementation a la Jim? Once the above are completed: - add support for programming flash using boundary scan techniques - add integration with a modified gerber view program: - provide means to view the PCB and select pins and traces - allow use-cases such as the following: - @b Stimulus -# Double-click on a pin (or trace) with the mouse. - @b Effects -# The trace starts blinking, and -# OpenOCD toggles the pin(s) 0/1. @section thelisttargets Target Support - general layer cleanup: - https://lists.berlios.de/pipermail/openocd-development/2009-May/006590.html - ARM11 improvements (MB?) - fix single stepping (reported by ØH) - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...) - Cortex A8 support (ML) - add target implementation (ML) - MC1322x support (JW/DE?) - integrate and test support from JW (and DE?) - get working with a known good interface (i.e. not today's jlink) - AT91SAM92xx: - improvements for unknown-board-atmel-at91sam9260.cfg (RD) - STR9x: (ZW) - improvements to str912.cfg to be more general purpose - AVR: (SQ) - independently verify implementation - incrementally improve working prototype in trunk. (SQ) - work out how to debug this target - AVR debugging protocol. - FPGA: - improve things (??) - Coldfire (suggested by NC) - can we draw from the BDM project? @par http://bdm.sourceforge.net/ or the OSBDM package @par http://forums.freescale.com/freescale/board/message?board.id=OSBDM08&thread.id=422 @section thelistsvf SVF/XSVF - factor and clean-up code - review The Guide for OpenOCD Users for documentation errors or omissions - update The Manual for OpenOCD Developerrs: - add documentation describing the architecture of each module - provide Technical Primers to bootstrap contributor knowledge - develop SVF unit tests - develop XSVF unit tests @section thelistflash Flash Support - finish documentation for the following flash drivers: - avr - ecosflash - pic32mx - ocl - str9xpec @subsection thelistflashcfi CFI - finish implementing bus width/chip width handling (suggested by NC) - factor vendor-specific code into separate source files - add new callback interface for vendor-specific code - investigate/implement "thin wrapper" to use eCos CFI drivers (ØH) @section thelistdebug Debugger Support - integrate Keil AGDI interface to OpenOCD? (submitted by Dario Vecchio) @section thelisttesting Testing Suite This section includes several related groups of ideas: - @ref thelistunittests - @ref thelistsmoketests - @ref thelisttestreports - @ref thelisttestgenerichw @subsection thelistunittests Unit Tests - add testing skeleton to provide frameworks for adding tests - implement server unit tests - implement JTAG core unit tests - implement JTAG interface unit tests - implement flash unit tests - implement target unit tests @subsection thelistsmoketests Smoke Test Tools -# extend 'make check' with a smoketest app - checks for OOCD_TEST_CONFIG, etc. in environment (or config file) - if properly set, runs the smoke test with specified parameters - openocd -f ${OOCD_TEST_CONFIG} - implies a modular test suite (see below) - should be able to run some minimal tests with dummy interface: - compare results of baseline sanity checks with expected results -# builds a more complete test suite: - existing testing/examples/ look like a great start - all targets should be tested fully and for all capabilities - we do NOT want a "lowest common denominator" test suite - ... but can we start with one to get going? - probably requires one test configuration file per board/target - modularization can occur here, just like with targets/boards/chips - coverage can increase over time, building up bundles of tests -# add new 'smoketest' Makefile target: - calls 'make check' (and the smoketest app) - gather inputs and output into a report file @subsection thelisttestreports Test Feedback Tools These ideas were first introduced here: https://lists.berlios.de/pipermail/openocd-development/2009-May/006358.html - provide report submission scripts for e-mail and web forms - add new Makefile targets to post the report: - 'checkreportsend' -- send to list via e-mail (via sendmail) - 'checkreportpost' -- send web form (via curl or other script) @subsection thelisttestgenerichw Generic Hardware Tester - implement VHDL to use for FPGA-based JTAG TAP testing device - develop test suite that utilizes this testing device @section thelistautotools Autotools Build System - investigate fixes to permit the use of -Wshadow - eliminate sources of confusion in @c boostrap script: -# Make @c bootstrap call 'configure --enable-maintainer-mode \'? -# Add @c buildstrap script to assist with boostrap and configure steps. - automatically build tool-chains required for cross-compiling - produce mingw32, arm-elf, others using in-tree scripts - build all required target code from sources - make JTAG and USB debug output a run-time configuration option @section thelistarchitecture Architectural Tasks The following architectural tasks need to be accomplished and should be fairly easy to complete: - factor code to eliminate duplicated functionality - overhaul use of types to improve 32/64-bit portability - rewrite code that uses casts to access 16-bit and larger types from unaligned memory addresses - libopenocd support: @par https://lists.berlios.de/pipermail/openocd-development/2009-May/006405.html - review and clean up interface/target/flash APIs The following strategic tasks will require ambition, knowledge, and time to complete: - Allow N:M:P mapping of servers, targets, and interfaces - loadable module support for interface/target/flash drivers @section thelistadmin Administrative Tasks - Develop "style" guidelines for committing to Subversion - Develop milestone and release guidelines. */ /** @file This file contains the @ref thelist page. */