/** @page thelist Pending and Open Tasks This page lists pending and open tasks being considered or worked upon by the OpenOCD community. Items with a current patch available should include a link to its posting on the openocd-developer mailing list archives. Some items may be in progress, usually indicated by the individual whose initials in parentheses following it. A key for decoding these initials appears after The List. Most items are open for the taking, but please post to the mailing list before spending much time working on anything lists here. The community may have evolved an idea since it was added here. Feel free to send patches to add or clarify items on this list, too. @verbatim ================================================================== The List ------------------------------------------------------------------ @endverbatim - JTAG/TAP changes: - update all drivers to use tap_get_tms_path_len API. - link to posted patch: @missing - rework TAP state table (started but still needs work) - link to posted patch: @missing - use tap_set_state everywhere to allow logging TAP state transitions - rename other tap_states to use standard JTAG names (suggested by ML) - write script that automate production of the series of 16-17 patches - produce and distribute current series against the current trunk - distribute script so developers can use on WC through live commits - make live commits after giving sufficient notice to others - add TAP_UNKNOWN to augment TAP_INVALID? (suggested by ML/DH) - JTAG Interfaces: - autodetect devices present on the scan chain - implement 'discover_taps' command - FT2232 driver: (DH) - integrate FTD2XX High-Speed Device Patch - link to posted patch: @missing - fix non-recoverability of cable connect/reconnect - link to posted patch: @missing - fix outstanding bugs - J-Link driver: (ZW) - fix outstanding bugs - test with known targets (i.e. working with other interfaces) - test compatibility between v6.0 (yellow) and older units (e.g. v5.2) - TCP driver: - add TCP/IP client and server for remote JTAG interface control - Do others need some help? Probably.... - Other Interfaces - SVF/XSVF: - pending tasks?? - SPI/UART emulation: - (ab)use bit-banging JTAG interfaces to emulate SPI/UART - allow SPI to program flash, MCUs, etc. - SWD - Target Support: - ARM11 improvements (MB?) - fix single stepping (reported by ØH) - implement missing functionality (grep FNC_INFO_NOTIMPLEMENTED ...) - Cortex A8 support (ML) - add target implementation (ML) - what else remains to be done? - MC1322x support (JW/DE?) - integrate and test support from JW (and DE?) - get working with a known good interface (i.e. not today's jlink) - AT91SAM92xx: - improvements for unknown-board-atmel-at91sam9260.cfg (RD) - STR9x: (ZW) - improvements to str912.cfg to be more general purpose - AVR: (SQ) - independently verify implementation - incrementally improve working prototype in trunk. (SQ) - work out how to debug this target - AVR debugging protocol. - FPGA: - improve things (??) - Coldfire (suggested by NC) - can we draw from the BDM project? @par http://bdm.sourceforge.net/ - other targets? (suggestions always welcome) - CFI: - speed enhancements (posted Apr 22 by NC) (??) - link to patch: @missing - finish implementing bus width/chip width handling (suggested by NC) - link to patch: @missing - factor vendor-specific code into separate source files - add new callback interface for vendor-specific code - investigate/implement "thin wrapper" to use eCos CFI drivers (ØH) - TCL - Isolate all TCL command support: - Allow pure C CLI implementations using --disable-builtin-tcl - Allow full TCL support? add --with-tcl=/path/to/installed/tcl - Move TCL support in foo.* to foo_tcl.* (other ideas?) - Debugger Support - Keil AGDI interface to OpenOCD (submitted by Dario Vecchio) - Architectural Upgrades - Allow N:M:P mapping of servers, targets, and interfaces - loadable module support for interface/target/flash drivers - libopenocd support: @par https://lists.berlios.de/pipermail/openocd-development/2009-May/006405.html - Test Suite: - implement server unit tests - implement JTAG core unit tests - implement JTAG interface unit tests - implement flash unit tests - implement target unit tests - Test Feedback Tools: @par https://lists.berlios.de/pipermail/openocd-development/2009-May/006358.html - extend target test script to produce helpful pass/fail output - provide results submission script - Generic Hardware Tester: - implement VHDL to use for FPGA-based JTAG TAP testing device - develop test suite that utilizes this testing device - Build Systems (Autotools, CMake, etc.) - investigate fixes to permit the use of -Wshadow - change bootstrap to call 'configure --enable-maintainer-mode '? - Miscellaneous: - make JTAG and USB debug output a run-time configuration option - review and clean up interface/target/flash APIs - factor code to eliminate duplicated functionality - overhaul use of types to improve 32/64-bit portability - Berlios Admin: - use patch tracker? @par https://developer.berlios.de/patch/?group_id=4148 - use bug tracking? we need something! @verbatim ================================================================== OpenOCD's Active Developers and Testers ------------------------------------------------------------------ ** | Name | Status | Targets | Interfaces ---+-----------------+--------+------------------+---------------- NC | Nico Coesel | * | AU1100 | * DE | Duane Ellis | * | * | * DH | Dick Hollenbeck | ? | * | FT2232 ØH | Øyvind Harboe | * | * | ZY1000 JK | Joern Keipf | * | * | FT2232H/FT4232HS? JW | Jeff Williams | ? | MC1322x | J-Link MA | Mariano Alvira | * | MC1322x | J-Link, FTDI MB | Michael Bruck | * | ARM11 | * ML | Magnus Lundin | * | * | * RA | Rick Altherr | * | * | * RD | Rene Doss | * | AT91SAM92xx | * SQ | Simon Qian | * | AVR | * ZW | Zach Welch | * | STR912 | J-Link Status Key: * - Active Contributor ? - Missing In Action V - On Vacation @endverbatim */