OpenOCD Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing Copyright (c) 2004-2007 Dominic Rath The debugger uses an IEEE 1149-1 compliant JTAG TAP bus master to access on-chip debug functionality available on ARM7 and ARM9 based microcontrollers / system-on-chip solutions. User interaction is realized through a telnet command line interface and a gdb (The GNU Debugger) remote protocol server. 1. JTAG hardware Currently, OpenOCD supports three types of JTAG interfaces: - Parallel port wigglers. These devices connect to a PC's parallel port, providing direct access to the JTAG lines. The OpenOCD contains descriptions of a few Wiggler layouts, including the original 'Wiggler' design. Other layouts (i.e. mapping of parallel port pins to JTAG lines) can be added easily. Typical Wiggler speeds are around 12kByte/s code download to an ARM7's RAM. - The Amontec JTAG Accelerator. This is a configuration for Amontec's Chameleon dongle, a parallel port interface based on a Xilinx CoolRunner CPLD. It uses the IEEE1284 EPP parallel port specification, providing many times the performance achievable with wiggler-style devices. Additional information is available on www.amontec.com. Typical JTAG Accelerator speeds are around 120-160kByte/s to an ARM7's RAM. - FTDI FT2232 based USB devices. The FT2232 (but not FT232 or FT245) features a multi-protocol synchronous serial engine (MPSSE) that can be used to run the serial JTAG protocol. There are several implemenations of FT2232 based devices: * USBJTAG: http://www.fh-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html The USBJTAG was designed by Prof. Hubert Hoegl to provide a high-speed USB interface for use with the OpenOCD. Schematics are available at the USBJTAG website, and a homebrew device can easily be built using the FTDI evaluation module DLP2232M. * OOCD-Link: http://www.joernonline.de/dw/doku.php?id=en:projects:oocdlink Similar to the USBJTAG, this design comes with free schematics, too. * Amontec JTAGkey: www.amontec.com The Amontec JTAGkey offers support for a wide variety of target voltages from 1.4V to 5V. It also allows the JTAG lines and reset signals to be tri-stated, allowing easy interfacing with a wide variety of targets. * Amontec JTAGkey-Tiny: www.amontec.com The Amontec JTAGkey offers support for a wide variety of target voltages from 2.8V to 5V. It also allows the reset signals to be tri-stated, allowing easy interfacing with a wide variety of targets. * Olimex ARM-USB-OCD: www.olimex.com The Olimex ARM-USB-OCD offers support for a wide vriety of target voltages from 2.0V to 5V. It also allows targets to be powered from the ARM-USB-OCD and features and additional RS232 UART. * eVerve Signalyzer: www.signalyzer.com The Signalyzer offers support for a wide variety of target voltages from 1.2V to 5.5V. A second connector provides access to a TTL level UART. All FT2232 based devices may be accessed using either FTDI's proprietary FTD2XX library (www.ftdichip.com) or using an open-source replacement from http://www.intra2net.com/de/produkte/opensource/ftdi/index.php, also included with many Linux distributions. 2. Supported cores This version of openocd supports the following ARM7/9 cores: - ARM7TDMI(-s) - ARM9TDMI - ARM920t - ARM922t - ARM926ej-s - ARM966e Support for Intel XScale CPUs is also included: - PXA25x - IXP42x PXA27x debugging should be similar to the PXA25x but fails in the current version of OpenOCD. 3. Host platforms OpenOCD was originally developed on x86-Linux, but has since then been ported to run on Windows/Cygwin, native Windows with MinGW, FreeBSD, x86-64-Linux and PowerPC OS-X. 4. Documentation Documentation for the OpenOCD is hosted in the Berlios OpenFacts Wiki at http://openfacts.berlios.de/index-en.phtml?title=Open_On-Chip_Debugger. 5. Licensing OpenOCD is licensed under the terms of the GNU General Public License, see the file COPYING for details.