testing/examples/STR912Test/prj/str912_jtagkey.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 # and enable flash programming
   7 gdb_memory_map enable
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Amontec JTAGkey A"
  13 ft2232_layout jtagkey
  14 ft2232_vid_pid 0x0403 0xcff8
  15 jtag_speed 1
  16
  17 jtag_nsrst_delay 100
  18 jtag_ntrst_delay 100
  19
  20 #use combined on interfaces or targets that can't set TRST/SRST separately
  21 reset_config trst_and_srst
  22
  23 #jtag scan chain
  24 jtag newtap str9 flash -irlen 8
  25 jtag newtap str9 cpu -irlen 4 -irmask 0xf
  26 jtag newtap str9 bs -irlen 5
  27
  28 #target configuration
  29 target create target0 arm966e -endian little -chain-position 1 -variant arm966e
  30 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false
  31
  32 target_script 0 gdb_program_config .\prj\str912_program.script
  33
  34 #flash bank str7x <base> <size> 0 0 <target#> <variant>
  35 flash bank str9x 0x00000000 0x00080000 0 0 0
  36
  37 # For more information about the configuration files, take a look at:
  38 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
  39
  40 init
  41 reset halt