testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 # and enable flash programming
   7 gdb_memory_map enable
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Amontec JTAGkey A"
  13 ft2232_layout jtagkey
  14 ft2232_vid_pid 0x0403 0xcff8
  15 jtag_speed 0
  16 jtag_nsrst_delay 200
  17 jtag_ntrst_delay 200
  18
  19
  20 #use combined on interfaces or targets that can't set TRST/SRST separately
  21 reset_config srst_only srst_pulls_trst
  22
  23 #jtag scan chain
  24 jtag newtap sam7 cpu -irlen 4 -irmask 0xf
  25
  26 #target configuration
  27 target create target0 arm7tdmi -endian little -chain-position 0
  28 [new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
  29
  30 target_script 0 reset .\prj\sam7s256_reset.script
  31
  32 #flash bank <driver> <base> <size> <chip_width> <bus_width>
  33 flash bank at91sam7 0 0 0 0 0
  34
  35 # For more information about the configuration files,
  36 # look at the OpenOCD User's Guide.
  37
  38 init
  39 reset halt