testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 # and enable flash programming
   7 gdb_memory_map enable
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Amontec JTAGkey A"
  13 ft2232_layout jtagkey
  14 ft2232_vid_pid 0x0403 0xcff8
  15 jtag_speed 3
  16
  17 #use combined on interfaces or targets that can't set TRST/SRST separately
  18 reset_config trst_and_srst srst_pulls_trst
  19
  20 #jtag scan chain
  21 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
  22 jtag_device 4 0x1 0xf 0xe
  23
  24 #target configuration
  25 daemon_startup reset
  26
  27 #target <type> <startup mode>
  28 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
  29 target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
  30 run_and_halt_time 0 30
  31
  32 working_area 0 0x40000000 0x4000 nobackup
  33
  34 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
  35 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
  36
  37 # For more information about the configuration files, take a look at:
  38 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger