testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg

   1 #daemon configuration
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # tell gdb our flash memory map
   6 gdb_memory_map enable
   7 # enable flash programming
   8 gdb_flash_program enable
   9
  10 #interface
  11 interface ft2232
  12 ft2232_device_desc "Turtelizer JTAG/RS232 Adapter A"
  13 ft2232_layout turtelizer2
  14 ft2232_vid_pid 0x0403 0xbdc8
  15 jtag_speed 0
  16 jtag_nsrst_delay 200
  17 jtag_ntrst_delay 200
  18
  19 #use combined on interfaces or targets that can't set TRST/SRST separately
  20 reset_config srst_only
  21
  22 #jtag scan chain
  23 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
  24 jtag_device 4 0x1 0xf 0xe
  25
  26 #target configuration
  27 daemon_startup reset
  28
  29 #target <type> <startup mode>
  30 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
  31 target arm7tdmi little run_and_init 0 arm7tdmi
  32 run_and_halt_time 0 30
  33
  34 target_script 0 reset .\prj\at91r40008_reset.script
  35
  36 working_area 0 0x3C000 0x4000 nobackup
  37 flash bank cfi 0x10000000 0x400000 2 2 0
  38
  39 # For more information about the configuration files, take a look at:
  40 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger