tcl/target/xmc1xxx.cfg

   1 #
   2 # Infineon XMC1100/XMC1200/XMC1300 family (ARM Cortex-M0 @ 32 MHz)
   3 #
   4
   5 if { [info exists CHIPNAME] } {
   6         set _CHIPNAME $CHIPNAME
   7 } else {
   8         set _CHIPNAME xmc1000
   9 }
  10
  11 #
  12 # Only SWD and SPD supported
  13 #
  14 source [find target/swj-dp.tcl]
  15
  16 if { [info exists CPUTAPID] } {
  17         set _CPU_SWD_TAPID $CPUTAPID
  18 } else {
  19         set _CPU_SWD_TAPID 0x0BB11477
  20 }
  21
  22 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_SWD_TAPID
  23 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
  24
  25 set _TARGETNAME $_CHIPNAME.cpu
  26 target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
  27
  28 if { [info exists WORKAREASIZE] } {
  29    set _WORKAREASIZE $WORKAREASIZE
  30 } else {
  31    set _WORKAREASIZE 0x4000
  32 }
  33
  34 $_TARGETNAME configure -work-area-phys 0x20000000 \
  35                        -work-area-size $_WORKAREASIZE \
  36                        -work-area-backup 0
  37
  38 set _FLASHNAME $_CHIPNAME.flash
  39 flash bank $_FLASHNAME xmc1xxx 0x10000000 0 0 0 $_TARGETNAME
  40
  41 adapter_khz 1000