tcl/target/tmpa900.cfg

   1 ######################################
   2 # Target:    Toshiba TMPA910
   3 ######################################
   4
   5 if { [info exists CHIPNAME] } {
   6    set  _CHIPNAME $CHIPNAME
   7 } else {
   8    set  _CHIPNAME tmpa910
   9 }
  10
  11 if { [info exists ENDIAN] } {
  12    set  _ENDIAN $ENDIAN
  13 } else {
  14    set  _ENDIAN little
  15 }
  16
  17 if { [info exists CPUTAPID ] } {
  18    set _CPUTAPID $CPUTAPID
  19 } else {
  20   # force an error till we get a good number
  21    set _CPUTAPID 0x07926031
  22 }
  23
  24 #TMPA910 has following IDs:
  25 # CP15.0 register 0x41069265
  26 # CP15.1 register 0x1d152152
  27 # ARM core 0x07926031
  28
  29
  30 #
  31 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
  32
  33 #use combined on interfaces or targets that can't set TRST/SRST separately
  34 reset_config trst_and_srst
  35 adapter_nsrst_delay 20
  36 jtag_ntrst_delay 20
  37
  38 ######################
  39 # Target configuration
  40 ######################
  41
  42 set _TARGETNAME $_CHIPNAME.cpu
  43 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
  44
  45 # built-in RAM0
  46 #working_area 0 0xf8004000 0x4000 nobackup
  47 # built-in RAM1
  48 #working_area 1 0xf8008000 0x4000 nobackup
  49 # built-in RAM2
  50 #working_area 2 0xf800c000 0x4000 nobackup
  51 # built-in RAM 0-2 48k total
  52 #working_area 0 0xf8004000 0xc000 nobackup
  53
  54 # Internal sram1 memory
  55 $_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x8000 \
  56 -work-area-backup 0