tcl/target/numicro.cfg

   1 # script for Nuvoton MuMicro Cortex-M0 Series
   2
   3 # Adapt based on what transport is active.
   4 source [find target/swj-dp.tcl]
   5
   6 # Set Chipname
   7 if { [info exists CHIPNAME] } {
   8         set _CHIPNAME $CHIPNAME
   9 } else {
  10         set _CHIPNAME NuMicro
  11 }
  12
  13 # SWD DP-ID Nuvoton NuMicro Cortex-M0 has SWD Transport only.
  14 if { [info exists CPUDAPID] } {
  15         set _CPUDAPID $CPUDAPID
  16 } else {
  17         set _CPUDAPID 0x0BB11477
  18 }
  19
  20 # Work-area is a space in RAM used for flash programming
  21 # By default use 2kB
  22 if { [info exists WORKAREASIZE] } {
  23    set _WORKAREASIZE $WORKAREASIZE
  24 } else {
  25    set _WORKAREASIZE 0x800
  26 }
  27
  28
  29 # Debug Adapter Target Settings
  30 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUDAPID
  31 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
  32 set _TARGETNAME $_CHIPNAME.cpu
  33 target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
  34
  35 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
  36
  37 # flash bank <name> numicro <base> <size(autodetect,set to 0)> 0 0 <target#>
  38 #set _FLASHNAME $_CHIPNAME.flash
  39 #flash bank $_FLASHNAME numicro 0 $_FLASHSIZE 0 0 $_TARGETNAME
  40 # flash size will be probed
  41 set _FLASHNAME $_CHIPNAME.flash_aprom
  42 flash bank $_FLASHNAME numicro 0x00000000 0 0 0 $_TARGETNAME
  43 set _FLASHNAME $_CHIPNAME.flash_data
  44 flash bank $_FLASHNAME numicro 0x0001F000 0 0 0 $_TARGETNAME
  45 set _FLASHNAME $_CHIPNAME.flash_ldrom
  46 flash bank $_FLASHNAME numicro 0x00100000 0 0 0 $_TARGETNAME
  47 set _FLASHNAME $_CHIPNAME.flash_config
  48 flash bank $_FLASHNAME numicro 0x00300000 0 0 0 $_TARGETNAME
  49
  50 # set default SWCLK frequency
  51 adapter_khz 1000
  52
  53 # set default srst setting "none"
  54 reset_config none
  55
  56 # HLA doesn't have cortex_m commands
  57 if {![using_hla]} {
  58    # if srst is not fitted use SYSRESETREQ to
  59    # perform a soft reset
  60    cortex_m reset_config sysresetreq
  61 }