tcl/target/numicro.cfg

   1 # script for Nuvoton MuMicro Cortex-M0 Series
   2
   3 # Adapt based on what transport is active.
   4 source [find target/swj-dp.tcl]
   5
   6 # Set Chipname
   7 if { [info exists CHIPNAME] } {
   8         set _CHIPNAME $CHIPNAME
   9 } else {
  10         set _CHIPNAME NuMicro
  11 }
  12
  13 # SWD DP-ID Nuvoton NuMicro Cortex-M0 has SWD Transport only.
  14 if { [info exists CPUDAPID] } {
  15         set _CPUDAPID $CPUDAPID
  16 } else {
  17         set _CPUDAPID 0x0BB11477
  18 }
  19
  20 # Work-area is a space in RAM used for flash programming
  21 # By default use 2kB
  22 if { [info exists WORKAREASIZE] } {
  23    set _WORKAREASIZE $WORKAREASIZE
  24 } else {
  25    set _WORKAREASIZE 0x800
  26 }
  27
  28
  29 # Debug Adapter Target Settings
  30 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUDAPID
  31 set _TARGETNAME $_CHIPNAME.cpu
  32 target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
  33
  34 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
  35
  36 # flash bank <name> numicro <base> <size(autodetect,set to 0)> 0 0 <target#>
  37 #set _FLASHNAME $_CHIPNAME.flash
  38 #flash bank $_FLASHNAME numicro 0 $_FLASHSIZE 0 0 $_TARGETNAME
  39 # flash size will be probed
  40 set _FLASHNAME $_CHIPNAME.flash_aprom
  41 flash bank $_FLASHNAME numicro 0x00000000 0 0 0 $_TARGETNAME
  42 set _FLASHNAME $_CHIPNAME.flash_data
  43 flash bank $_FLASHNAME numicro 0x0001F000 0 0 0 $_TARGETNAME
  44 set _FLASHNAME $_CHIPNAME.flash_ldrom
  45 flash bank $_FLASHNAME numicro 0x00100000 0 0 0 $_TARGETNAME
  46 set _FLASHNAME $_CHIPNAME.flash_config
  47 flash bank $_FLASHNAME numicro 0x00300000 0 0 0 $_TARGETNAME
  48
  49 # set default SWCLK frequency
  50 adapter_khz 1000
  51
  52 # set default srst setting "none"
  53 reset_config none
  54
  55 # HLA doesn't have cortex_m commands
  56 if {![using_hla]} {
  57    # if srst is not fitted use SYSRESETREQ to
  58    # perform a soft reset
  59    cortex_m reset_config sysresetreq
  60 }