tcl/target/lpc2129.cfg

   1 # NXP LPC2129
   2
   3 if { [info exists CHIPNAME] } {
   4    set  _CHIPNAME $CHIPNAME
   5 } else {
   6    set  _CHIPNAME lpc2129
   7 }
   8
   9 if { [info exists ENDIAN] } {
  10    set  _ENDIAN $ENDIAN
  11 } else {
  12    set  _ENDIAN little
  13 }
  14
  15 if { [info exists CPUTAPID ] } {
  16    set _CPUTAPID $CPUTAPID
  17 } else {
  18    set _CPUTAPID 0xcf1f0f0f
  19 }
  20
  21 #use combined on interfaces or targets that can't set TRST/SRST separately
  22 reset_config trst_and_srst srst_pulls_trst
  23
  24 # reset delays
  25 adapter_nsrst_delay 100
  26 jtag_ntrst_delay 100
  27
  28 #jtag scan chain
  29 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
  30
  31 set _TARGETNAME $_CHIPNAME.cpu
  32 target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
  33
  34 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
  35
  36 # flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
  37 set _FLASHNAME $_CHIPNAME.flash
  38 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum