tcl/target/aducm360.cfg

   1 #
   2 # This file was created using as references the stm32f1x.cfg and aduc702x.cfg
   3 #
   4 source [find target/swj-dp.tcl]
   5
   6 # Chip name
   7 if { [info exists CHIPNAME] } {
   8    set _CHIPNAME $CHIPNAME
   9 } else {
  10    set _CHIPNAME aducm360
  11 }
  12
  13 # Endianness
  14 if { [info exists ENDIAN] } {
  15    set _ENDIAN $ENDIAN
  16 } else {
  17    set _ENDIAN little
  18 }
  19
  20 # Work-area is a space in RAM used for flash programming
  21 # Eventually, the whole SRAM of ADuCM360 will be used (8kB)
  22 if { [info exists WORKAREASIZE] } {
  23    set _WORKAREASIZE $WORKAREASIZE
  24 } else {
  25    set _WORKAREASIZE 0x2000
  26 }
  27
  28 #jtag scan chain
  29 if { [info exists CPUTAPID] } {
  30    set _CPUTAPID $CPUTAPID
  31 } else {
  32    set _CPUTAPID 0x2ba01477
  33 }
  34
  35 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
  36 dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
  37
  38 # SWD/JTAG speed
  39 adapter speed 1000
  40
  41 ##
  42 ## Target configuration
  43 ##
  44 set _TARGETNAME $_CHIPNAME.cpu
  45 target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
  46
  47 # allocate the working area
  48 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
  49
  50 # flash size will be probed
  51 set _FLASHNAME $_CHIPNAME.flash
  52 flash bank $_FLASHNAME aducm360 0x00 0 0 0 $_TARGETNAME
  53
  54 adapter srst delay 100
  55
  56 cortex_m reset_config sysresetreq